Commit 5fc61a47 authored by Ludovic Desroches's avatar Ludovic Desroches Committed by Greg Kroah-Hartman

iio: adc: at91: don't use the last converted data register

commit d4f51956 upstream.

If touchscreen mode is enabled and a conversion is requested on another
channel, the result in the last converted data register can be a
touchscreen relative value. Starting a conversion involves to do a
conversion for all active channel. It starts with ADC channels and ends
with touchscreen channels. Then if ADC_LCD register is not read quickly,
its content may be a touchscreen conversion.
To remove this temporal constraint, the conversion value is taken from
the channel data register.
Signed-off-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 920f8809
...@@ -196,6 +196,7 @@ struct at91_adc_state { ...@@ -196,6 +196,7 @@ struct at91_adc_state {
bool done; bool done;
int irq; int irq;
u16 last_value; u16 last_value;
int chnb;
struct mutex lock; struct mutex lock;
u8 num_channels; u8 num_channels;
void __iomem *reg_base; void __iomem *reg_base;
...@@ -274,7 +275,7 @@ void handle_adc_eoc_trigger(int irq, struct iio_dev *idev) ...@@ -274,7 +275,7 @@ void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
disable_irq_nosync(irq); disable_irq_nosync(irq);
iio_trigger_poll(idev->trig, iio_get_time_ns()); iio_trigger_poll(idev->trig, iio_get_time_ns());
} else { } else {
st->last_value = at91_adc_readl(st, AT91_ADC_LCDR); st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb));
st->done = true; st->done = true;
wake_up_interruptible(&st->wq_data_avail); wake_up_interruptible(&st->wq_data_avail);
} }
...@@ -351,7 +352,7 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) ...@@ -351,7 +352,7 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
unsigned int reg; unsigned int reg;
status &= at91_adc_readl(st, AT91_ADC_IMR); status &= at91_adc_readl(st, AT91_ADC_IMR);
if (status & st->registers->drdy_mask) if (status & GENMASK(st->num_channels - 1, 0))
handle_adc_eoc_trigger(irq, idev); handle_adc_eoc_trigger(irq, idev);
if (status & AT91RL_ADC_IER_PEN) { if (status & AT91RL_ADC_IER_PEN) {
...@@ -418,7 +419,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private) ...@@ -418,7 +419,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
AT91_ADC_IER_YRDY | AT91_ADC_IER_YRDY |
AT91_ADC_IER_PRDY; AT91_ADC_IER_PRDY;
if (status & st->registers->drdy_mask) if (status & GENMASK(st->num_channels - 1, 0))
handle_adc_eoc_trigger(irq, idev); handle_adc_eoc_trigger(irq, idev);
if (status & AT91_ADC_IER_PEN) { if (status & AT91_ADC_IER_PEN) {
...@@ -689,9 +690,10 @@ static int at91_adc_read_raw(struct iio_dev *idev, ...@@ -689,9 +690,10 @@ static int at91_adc_read_raw(struct iio_dev *idev,
case IIO_CHAN_INFO_RAW: case IIO_CHAN_INFO_RAW:
mutex_lock(&st->lock); mutex_lock(&st->lock);
st->chnb = chan->channel;
at91_adc_writel(st, AT91_ADC_CHER, at91_adc_writel(st, AT91_ADC_CHER,
AT91_ADC_CH(chan->channel)); AT91_ADC_CH(chan->channel));
at91_adc_writel(st, AT91_ADC_IER, st->registers->drdy_mask); at91_adc_writel(st, AT91_ADC_IER, BIT(chan->channel));
at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START); at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START);
ret = wait_event_interruptible_timeout(st->wq_data_avail, ret = wait_event_interruptible_timeout(st->wq_data_avail,
...@@ -708,7 +710,7 @@ static int at91_adc_read_raw(struct iio_dev *idev, ...@@ -708,7 +710,7 @@ static int at91_adc_read_raw(struct iio_dev *idev,
at91_adc_writel(st, AT91_ADC_CHDR, at91_adc_writel(st, AT91_ADC_CHDR,
AT91_ADC_CH(chan->channel)); AT91_ADC_CH(chan->channel));
at91_adc_writel(st, AT91_ADC_IDR, st->registers->drdy_mask); at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));
st->last_value = 0; st->last_value = 0;
st->done = false; st->done = false;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment