Commit 5ff98fa6 authored by Suman Anna's avatar Suman Anna Committed by Joerg Roedel

iommu/omap: Use BIT(x) macros in omap-iopgtable.h

Switch to using the BIT(x) macros in omap-iopgtable.h where
possible. This eliminates the following checkpatch check
warning:
    "CHECK: Prefer using the BIT macro"

A couple of macros that used zero bit shifting are defined
directly to avoid the above warning on one of the macros.
Signed-off-by: default avatarSuman Anna <s-anna@ti.com>
Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
parent 99ee98d6
......@@ -13,25 +13,27 @@
#ifndef _OMAP_IOPGTABLE_H
#define _OMAP_IOPGTABLE_H
#include <linux/bitops.h>
/*
* "L2 table" address mask and size definitions.
*/
#define IOPGD_SHIFT 20
#define IOPGD_SIZE (1UL << IOPGD_SHIFT)
#define IOPGD_SIZE BIT(IOPGD_SHIFT)
#define IOPGD_MASK (~(IOPGD_SIZE - 1))
/*
* "section" address mask and size definitions.
*/
#define IOSECTION_SHIFT 20
#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT)
#define IOSECTION_SIZE BIT(IOSECTION_SHIFT)
#define IOSECTION_MASK (~(IOSECTION_SIZE - 1))
/*
* "supersection" address mask and size definitions.
*/
#define IOSUPER_SHIFT 24
#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT)
#define IOSUPER_SIZE BIT(IOSUPER_SHIFT)
#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT))
......@@ -41,14 +43,14 @@
* "small page" address mask and size definitions.
*/
#define IOPTE_SHIFT 12
#define IOPTE_SIZE (1UL << IOPTE_SHIFT)
#define IOPTE_SIZE BIT(IOPTE_SHIFT)
#define IOPTE_MASK (~(IOPTE_SIZE - 1))
/*
* "large page" address mask and size definitions.
*/
#define IOLARGE_SHIFT 16
#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT)
#define IOLARGE_SIZE BIT(IOLARGE_SHIFT)
#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
......@@ -72,16 +74,16 @@ static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask)
/*
* some descriptor attributes.
*/
#define IOPGD_TABLE (1 << 0)
#define IOPGD_SECTION (2 << 0)
#define IOPGD_SUPER (1 << 18 | 2 << 0)
#define IOPGD_TABLE (1)
#define IOPGD_SECTION (2)
#define IOPGD_SUPER (BIT(18) | IOPGD_SECTION)
#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE)
#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION)
#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER)
#define IOPTE_SMALL (2 << 0)
#define IOPTE_LARGE (1 << 0)
#define IOPTE_SMALL (2)
#define IOPTE_LARGE (1)
#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL)
#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment