Commit 606057bd authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Bjorn Andersson

arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s

Add pinctrl nodes required for QUAT I2S
Reviewed-by: default avatarVinod Koul <vkoul@kernel.org>
Tested-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200312143024.11059-5-srinivas.kandagatla@linaro.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 45021d35
......@@ -2150,6 +2150,142 @@ pinmux {
function = "qup15";
};
};
quat_mi2s_sleep: quat_mi2s_sleep {
mux {
pins = "gpio58", "gpio59";
function = "gpio";
};
config {
pins = "gpio58", "gpio59";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_active: quat_mi2s_active {
mux {
pins = "gpio58", "gpio59";
function = "qua_mi2s";
};
config {
pins = "gpio58", "gpio59";
drive-strength = <8>;
bias-disable;
output-high;
};
};
quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep {
mux {
pins = "gpio60";
function = "gpio";
};
config {
pins = "gpio60";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd0_active: quat_mi2s_sd0_active {
mux {
pins = "gpio60";
function = "qua_mi2s";
};
config {
pins = "gpio60";
drive-strength = <8>;
bias-disable;
};
};
quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep {
mux {
pins = "gpio61";
function = "gpio";
};
config {
pins = "gpio61";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd1_active: quat_mi2s_sd1_active {
mux {
pins = "gpio61";
function = "qua_mi2s";
};
config {
pins = "gpio61";
drive-strength = <8>;
bias-disable;
};
};
quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep {
mux {
pins = "gpio62";
function = "gpio";
};
config {
pins = "gpio62";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd2_active: quat_mi2s_sd2_active {
mux {
pins = "gpio62";
function = "qua_mi2s";
};
config {
pins = "gpio62";
drive-strength = <8>;
bias-disable;
};
};
quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep {
mux {
pins = "gpio63";
function = "gpio";
};
config {
pins = "gpio63";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd3_active: quat_mi2s_sd3_active {
mux {
pins = "gpio63";
function = "qua_mi2s";
};
config {
pins = "gpio63";
drive-strength = <8>;
bias-disable;
};
};
};
mss_pil: remoteproc@4080000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment