Merge tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "at91: dt for 3.20 #1" from Nicolas Ferre:

First batch of DT changes for 3.20:
- little typo and a LED declared
- addition of the Special Function Registers (SFR) + its binding
- RTC & SRAM nodes
- the at91sam9xe has its own .dtsi now. Not combined with at91sam9260 anymore
- addition of the Image Sensor Interface (ISI) DT part and supported sensors

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: dts: sama5d3: add ov2640 camera sensor support
  ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
  ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
  ARM: at91: dts: sama5d3: move the isi mck pin to mb
  ARM: at91: dts: sama5d3: add missing pins of isi
  ARM: at91: dts: sama5d3: split isi pinctrl
  ARM: at91: dts: sama5d3: add isi clock
  ARM: at91/dt: ethernut5: use at91sam9xe.dtsi
  ARM: at91/dt: Add a dtsi for at91sam9xe
  ARM: at91/dt: add SRAM nodes
  ARM: at91/dt: at91rm9200ek: enable RTC
  ARM: at91/dt: rm9200: add RTC node
  ARM: at91/dt: at91sam9n12: Add RTC node
  ARM: at91: sama5d4: Add SFR
  ARM: at91: sama5d3: Add SFR
  ARM: at91: Add Special Function Registers binding documentation
  ARM: at91/dt: sam9263: Fix typo: ac91_clk -> ac97_clk
  ARM: at91/dt: sama5d3: enable D2 as the heartbeat LED
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -24,6 +24,7 @@ compatible: must be one of:
     o "atmel,at91sam9g45"
     o "atmel,at91sam9n12"
     o "atmel,at91sam9rl"
+    o "atmel,at91sam9xe"
  * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
    SoC family:
     o "atmel,sama5d3" shall be extended with the specific SoC compatible:
@@ -136,3 +137,19 @@ Example:
 		compatible = "atmel,at91sam9260-rstc";
 		reg = <0xfffffd00 0x10>;
 	};
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon".
+  <chip> can be "sama5d3" or "sama5d4".
+- reg: Should contain registers location and length
+
+	sfr@f0038000 {
+		compatible = "atmel,sama5d3-sfr", "syscon";
+		reg = <0xf0038000 0x60>;
+	};

arch/arm/boot/dts/at91rm9200.dtsi

@@ -66,6 +66,11 @@ main_xtal: main_xtal {
 		};
 	};
 
+	sram: sram@00200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x4000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -356,6 +361,13 @@ st: timer@fffffd00 {
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
+			rtc: rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
 			tcb0: timer@fffa0000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa0000 0x100>;

arch/arm/boot/dts/at91rm9200ek.dts

@@ -77,6 +77,10 @@ mtd_dataflash@0 {
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
+
+			rtc: rtc@fffffe00 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00300000 {

arch/arm/boot/dts/at91sam9260.dtsi

@@ -69,6 +69,11 @@ adc_op_clk: adc_op_clk{
 		};
 	};
 
+	sram0: sram@002ff000 {
+		compatible = "mmio-sram";
+		reg = <0x002ff000 0x2000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/at91sam9261.dtsi

@@ -60,6 +60,11 @@ slow_xtal: slow_xtal {
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x28000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/at91sam9263.dtsi

@@ -62,6 +62,16 @@ slow_xtal: slow_xtal {
 		};
 	};
 
+	sram0: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x14000>;
+	};
+
+	sram1: sram@00500000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -294,7 +304,7 @@ ssc1_clk: ssc1_clk {
 						reg = <17>;
 					};
 
-					ac91_clk: ac97_clk {
+					ac97_clk: ac97_clk {
 						#clock-cells = <0>;
 						reg = <18>;
 					};

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -16,6 +16,15 @@ memory {
 		reg = <0x20000000 0x08000000>;
 	};
 
+	sram0: sram@002ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@002fc000 {
+		compatible = "mmio-sram";
+		reg = <0x002fc000 0x8000>;
+	};
+
 	ahb {
 		apb {
 			i2c0: i2c@fffac000 {

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -74,6 +74,11 @@ adc_op_clk: adc_op_clk{
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1287,7 +1292,6 @@ usb0: ohci@00700000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			//TODO
 			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
@@ -1297,7 +1301,6 @@ usb1: ehci@00800000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			//TODO
 			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
 			status = "disabled";

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -64,6 +64,11 @@ main_xtal: main_xtal {
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -893,6 +898,13 @@ watchdog@fffffe40 {
 				status = "disabled";
 			};
 
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
 			pwm0: pwm@f8034000 {
 				compatible = "atmel,at91sam9rl-pwm";
 				reg = <0xf8034000 0x300>;

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -70,6 +70,11 @@ adc_op_clk: adc_op_clk{
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -72,6 +72,11 @@ adc_op_clk: adc_op_clk{
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/at91sam9xe.dtsi

+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9XE family SoC";
+	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+	sram0: sram@002ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+	};
+};

arch/arm/boot/dts/ethernut5.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-#include "at91sam9260.dtsi"
+#include "at91sam9xe.dtsi"
 
 / {
 	model = "Ethernut 5";

arch/arm/boot/dts/sama5d3.dtsi

@@ -78,6 +78,11 @@ adc_op_clk: adc_op_clk{
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -214,7 +219,20 @@ isi: isi@f0034000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
 				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
 				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
 			};
 
 			mmc1: mmc@f8000000 {
@@ -545,7 +563,7 @@ pinctrl_i2c2: i2c2-0 {
 				};
 
 				isi {
-					pinctrl_isi: isi-0 {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
 						atmel,pins =
 							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
 							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
@@ -557,13 +575,19 @@ AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts
 							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
 							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
 							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
-							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
-							 AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
 							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
 					};
-					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
 						atmel,pins =
-							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
 					};
 				};
 

arch/arm/boot/dts/sama5d3xcm.dtsi

@@ -122,6 +122,7 @@ leds {
 		d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
 		};
 	};
 };

arch/arm/boot/dts/sama5d3xmb.dtsi

@@ -52,6 +52,29 @@ wm8904: wm8904@1a {
 				};
 			};
 
+			i2c1: i2c@f0018000 {
+				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
 			usart1: serial@f0020000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
 				pinctrl-names = "default";
@@ -60,8 +83,12 @@ usart1: serial@f0020000 {
 			};
 
 			isi: isi@f0034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+					};
+				};
 			};
 
 			mmc1: mmc@f8000000 {
@@ -117,12 +144,17 @@ pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
 							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
 					};
 
-					pinctrl_isi_reset: isi_reset-0 {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
 						atmel,pins =
 							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
 					};
 
-					pinctrl_isi_power: isi_power-0 {
+					pinctrl_sensor_power: sensor_power-0 {
 						atmel,pins =
 							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
 					};

arch/arm/boot/dts/sama5d4.dtsi

@@ -103,6 +103,11 @@ adc_op_clk: adc_op_clk{
 		};
 	};
 
+	ns_sram: sram@00210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -870,6 +875,11 @@ i2c2: i2c@f8024000 {
 				status = "disabled";
 			};
 
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
 			mmc1: mmc@fc000000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfc000000 0x600>;