Merge tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt updates from Thomas Gleixner:
 "Core code:

   - Provide a generic wrapper which can be utilized in drivers to
     handle the problem of force threaded demultiplex interrupts on RT
     enabled kernels. This avoids conditionals and horrible quirks in
     drivers all over the place

   - Fix up affected pinctrl and GPIO drivers to make them cleanly RT
     safe

  Interrupt drivers:

   - A new driver for the FSL MU platform specific MSI implementation

   - Make irqchip_init() available for pure ACPI based systems

   - Provide a functional DT binding for the Realtek RTL interrupt chip

   - The usual DT updates and small code improvements all over the
     place"

* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  irqchip: IMX_MU_MSI should depend on ARCH_MXC
  irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
  irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
  dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
  irqchip: Add IMX MU MSI controller driver
  dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
  irqchip/gic-v3: Fix typo in comment
  dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
  dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
  irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
  platform-msi: Export symbol platform_msi_create_irq_domain()
  irqchip/realtek-rtl: use parent interrupts
  dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
  irqchip/realtek-rtl: use irq_domain_add_linear()
  irqchip: Make irqchip_init() usable on pure ACPI systems
  bcma: gpio: Use generic_handle_irq_safe()
  gpio: mlxbf2: Use generic_handle_irq_safe()
  platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
  ssb: gpio: Use generic_handle_irq_safe()
  pinctrl: amd: Use generic_handle_irq_safe()
  ...

Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor (A side) to signal the other processor (B side) using
+  interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-side, Processor B-side).
+
+  MU can work as msi interrupt controller to do doorbell
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mu-msi
+      - fsl,imx7ulp-mu-msi
+      - fsl,imx8ulp-mu-msi
+      - fsl,imx8ulp-mu-msi-s4
+
+  reg:
+    items:
+      - description: a side register base address
+      - description: b side register base address
+
+  reg-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupts:
+    description: a side interrupt number.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: a side power domain
+      - description: b side power domain
+
+  power-domain-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    msi-controller@5d270000 {
+        compatible = "fsl,imx6sx-mu-msi";
+        msi-controller;
+        #msi-cells = <0>;
+        interrupt-controller;
+        reg = <0x5d270000 0x10000>,     /* A side */
+              <0x5d300000 0x10000>;     /* B side */
+        reg-names = "processor-a-side", "processor-b-side";
+        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MU_12A>,
+                        <&pd IMX_SC_R_MU_12B>;
+        power-domain-names = "processor-a-side", "processor-b-side";
+    };

Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml

@@ -6,6 +6,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Realtek RTL SoC interrupt controller devicetree bindings
 
+description:
+  Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
+  interrupt to be routed to one parent CPU (hardware) interrupt, or left
+  disconnected.
+  All connected input lines from SoC peripherals can be masked individually,
+  and an interrupt status register is present to indicate which interrupts are
+  pending.
+
 maintainers:
   - Birger Koblitz <mail@birger-koblitz.de>
   - Bert Vermeulen <bert@biot.com>
@@ -13,23 +21,33 @@ maintainers:
 
 properties:
   compatible:
-    const: realtek,rtl-intc
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl8380-intc
+          - const: realtek,rtl-intc
+      - const: realtek,rtl-intc
+        deprecated: true
 
   "#interrupt-cells":
+    description:
+      SoC interrupt line index.
     const: 1
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 15
+    description:
+      List of parent interrupts, in the order that they are connected to this
+      interrupt router's outputs, starting at the first output.
 
   interrupt-controller: true
 
-  "#address-cells":
-    const: 0
-
   interrupt-map:
+    deprecated: true
     description: Describes mapping from SoC interrupts to CPU interrupts
 
 required:
@@ -37,21 +55,33 @@ required:
   - reg
   - "#interrupt-cells"
   - interrupt-controller
-  - "#address-cells"
-  - interrupt-map
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: realtek,rtl-intc
+    then:
+      properties:
+        "#address-cells":
+          const: 0
+      required:
+        - "#address-cells"
+        - interrupt-map
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false
 
 examples:
   - |
-    intc: interrupt-controller@3000 {
-      compatible = "realtek,rtl-intc";
+    interrupt-controller@3000 {
+      compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
       #interrupt-cells = <1>;
       interrupt-controller;
-      reg = <0x3000 0x20>;
-      #address-cells = <0>;
-      interrupt-map =
-              <31 &cpuintc 2>,
-              <30 &cpuintc 1>,
-              <29 &cpuintc 5>;
+      reg = <0x3000 0x18>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>, <4>, <5>, <6>;
     };

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml

@@ -37,6 +37,7 @@ properties:
           - renesas,intc-ex-r8a77990    # R-Car E3
           - renesas,intc-ex-r8a77995    # R-Car D3
           - renesas,intc-ex-r8a779a0    # R-Car V3U
+          - renesas,intc-ex-r8a779g0    # R-Car V4H
       - const: renesas,irqc
 
   '#interrupt-cells':

Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml

@@ -59,6 +59,9 @@ properties:
 
   interrupt-controller: true
 
+  '#interrupt-cells':
+    const: 0
+
   msi-controller: true
 
   ti,interrupt-ranges:

Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml

@@ -58,6 +58,9 @@ properties:
         1 = If intr supports edge triggered interrupts.
         4 = If intr supports level triggered interrupts.
 
+  reg:
+    maxItems: 1
+
   interrupt-controller: true
 
   '#interrupt-cells':

drivers/base/platform-msi.c

@@ -138,6 +138,7 @@ struct irq_domain *platform_msi_create_irq_domain(struct fwnode_handle *fwnode,
 
 	return domain;
 }
+EXPORT_SYMBOL_GPL(platform_msi_create_irq_domain);
 
 static int platform_msi_alloc_priv_data(struct device *dev, unsigned int nvec,
 					irq_write_msi_msg_t write_msi_msg)

drivers/bcma/driver_gpio.c

@@ -115,7 +115,7 @@ static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	for_each_set_bit(gpio, &irqs, gc->ngpio)
-		generic_handle_irq(irq_find_mapping(gc->irq.domain, gpio));
+		generic_handle_domain_irq_safe(gc->irq.domain, gpio);
 	bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
 
 	return IRQ_HANDLED;

drivers/gpio/gpio-mlxbf2.c

@@ -273,10 +273,8 @@ static irqreturn_t mlxbf2_gpio_irq_handler(int irq, void *ptr)
 	pending = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_CAUSE_EVTEN0);
 	writel(pending, gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
 
-	for_each_set_bit(level, &pending, gc->ngpio) {
-		int gpio_irq = irq_find_mapping(gc->irq.domain, level);
-		generic_handle_irq(gpio_irq);
-	}
+	for_each_set_bit(level, &pending, gc->ngpio)
+		generic_handle_domain_irq_safe(gc->irq.domain, level);
 
 	return IRQ_RETVAL(pending);
 }

drivers/irqchip/Kconfig

@@ -3,7 +3,7 @@ menu "IRQ chip support"
 
 config IRQCHIP
 	def_bool y
-	depends on OF_IRQ
+	depends on (OF_IRQ || ACPI_GENERIC_GSI)
 
 config ARM_GIC
 	bool
@@ -481,6 +481,21 @@ config IMX_INTMUX
 	help
 	  Support for the i.MX INTMUX interrupt multiplexer.
 
+config IMX_MU_MSI
+	tristate "i.MX MU used as MSI controller"
+	depends on OF && HAS_IOMEM
+	depends on ARCH_MXC || COMPILE_TEST
+	default m if ARCH_MXC
+	select IRQ_DOMAIN
+	select IRQ_DOMAIN_HIERARCHY
+	select GENERIC_MSI_IRQ_DOMAIN
+	help
+	  Provide a driver for the i.MX Messaging Unit block used as a
+	  CPU-to-CPU MSI controller. This requires a specially crafted DT
+	  to make use of this driver.
+
+	  If unsure, say N
+
 config LS1X_IRQ
 	bool "Loongson-1 Interrupt Controller"
 	depends on MACH_LOONGSON32

drivers/irqchip/Makefile

@@ -99,6 +99,7 @@ obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o
+obj-$(CONFIG_IMX_MU_MSI)		+= irq-imx-mu-msi.o
 obj-$(CONFIG_MADERA_IRQ)		+= irq-madera.o
 obj-$(CONFIG_LS1X_IRQ)			+= irq-ls1x.o
 obj-$(CONFIG_TI_SCI_INTR_IRQCHIP)	+= irq-ti-sci-intr.o

drivers/irqchip/irq-gic-v3.c

@@ -978,7 +978,7 @@ static int __gic_update_rdist_properties(struct redist_region *region,
 	u64 typer = gic_read_typer(ptr + GICR_TYPER);
 	u32 ctlr = readl_relaxed(ptr + GICR_CTLR);
 
-	/* Boot-time cleanip */
+	/* Boot-time cleanup */
 	if ((typer & GICR_TYPER_VLPIS) && (typer & GICR_TYPER_RVPEID)) {
 		u64 val;
 

drivers/irqchip/irq-ls-extirq.c

@@ -6,8 +6,7 @@
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -16,13 +15,41 @@
 #define LS1021A_SCFGREVCR 0x200
 
 struct ls_extirq_data {
-	struct regmap		*syscon;
-	u32			intpcr;
+	void __iomem		*intpcr;
+	raw_spinlock_t		lock;
+	bool			big_endian;
 	bool			is_ls1021a_or_ls1043a;
 	u32			nirq;
 	struct irq_fwspec	map[MAXIRQ];
 };
 
+static void ls_extirq_intpcr_rmw(struct ls_extirq_data *priv, u32 mask,
+				 u32 value)
+{
+	u32 intpcr;
+
+	/*
+	 * Serialize concurrent calls to ls_extirq_set_type() from multiple
+	 * IRQ descriptors, making sure the read-modify-write is atomic.
+	 */
+	raw_spin_lock(&priv->lock);
+
+	if (priv->big_endian)
+		intpcr = ioread32be(priv->intpcr);
+	else
+		intpcr = ioread32(priv->intpcr);
+
+	intpcr &= ~mask;
+	intpcr |= value;
+
+	if (priv->big_endian)
+		iowrite32be(intpcr, priv->intpcr);
+	else
+		iowrite32(intpcr, priv->intpcr);
+
+	raw_spin_unlock(&priv->lock);
+}
+
 static int
 ls_extirq_set_type(struct irq_data *data, unsigned int type)
 {
@@ -51,7 +78,8 @@ ls_extirq_set_type(struct irq_data *data, unsigned int type)
 	default:
 		return -EINVAL;
 	}
-	regmap_update_bits(priv->syscon, priv->intpcr, mask, value);
+
+	ls_extirq_intpcr_rmw(priv, mask, value);
 
 	return irq_chip_set_type_parent(data, type);
 }
@@ -143,7 +171,6 @@ ls_extirq_parse_map(struct ls_extirq_data *priv, struct device_node *node)
 static int __init
 ls_extirq_of_init(struct device_node *node, struct device_node *parent)
 {
-
 	struct irq_domain *domain, *parent_domain;
 	struct ls_extirq_data *priv;
 	int ret;
@@ -151,40 +178,52 @@ ls_extirq_of_init(struct device_node *node, struct device_node *parent)
 	parent_domain = irq_find_host(parent);
 	if (!parent_domain) {
 		pr_err("Cannot find parent domain\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_irq_find_host;
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->syscon = syscon_node_to_regmap(node->parent);
-	if (IS_ERR(priv->syscon)) {
-		ret = PTR_ERR(priv->syscon);
-		pr_err("Failed to lookup parent regmap\n");
-		goto out;
+	if (!priv) {
+		ret = -ENOMEM;
+		goto err_alloc_priv;
 	}
-	ret = of_property_read_u32(node, "reg", &priv->intpcr);
-	if (ret) {
-		pr_err("Missing INTPCR offset value\n");
-		goto out;
+
+	/*
+	 * All extirq OF nodes are under a scfg/syscon node with
+	 * the 'ranges' property
+	 */
+	priv->intpcr = of_iomap(node, 0);
+	if (!priv->intpcr) {
+		pr_err("Cannot ioremap OF node %pOF\n", node);
+		ret = -ENOMEM;
+		goto err_iomap;
 	}
 
 	ret = ls_extirq_parse_map(priv, node);
 	if (ret)
-		goto out;
+		goto err_parse_map;
 
+	priv->big_endian = of_device_is_big_endian(parent);
 	priv->is_ls1021a_or_ls1043a = of_device_is_compatible(node, "fsl,ls1021a-extirq") ||
 				      of_device_is_compatible(node, "fsl,ls1043a-extirq");
+	raw_spin_lock_init(&priv->lock);
 
 	domain = irq_domain_add_hierarchy(parent_domain, 0, priv->nirq, node,
 					  &extirq_domain_ops, priv);
-	if (!domain)
+	if (!domain) {
 		ret = -ENOMEM;
+		goto err_add_hierarchy;
+	}
 
-out:
-	if (ret)
-		kfree(priv);
+	return 0;
+
+err_add_hierarchy:
+err_parse_map:
+	iounmap(priv->intpcr);
+err_iomap:
+	kfree(priv);
+err_alloc_priv:
+err_irq_find_host:
 	return ret;
 }
 

drivers/irqchip/irq-realtek-rtl.c

@@ -21,11 +21,33 @@
 #define RTL_ICTL_IRR2		0x10
 #define RTL_ICTL_IRR3		0x14
 
+#define RTL_ICTL_NUM_INPUTS	32
+
 #define REG(x)		(realtek_ictl_base + x)
 
 static DEFINE_RAW_SPINLOCK(irq_lock);
 static void __iomem *realtek_ictl_base;
 
+/*
+ * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering,
+ * placing IRQ 31 in the first four bits. A routing value of '0' means the
+ * interrupt is left disconnected. Routing values {1..15} connect to output
+ * lines {0..14}.
+ */
+#define IRR_OFFSET(idx)		(4 * (3 - (idx * 4) / 32))
+#define IRR_SHIFT(idx)		((idx * 4) % 32)
+
+static void write_irr(void __iomem *irr0, int idx, u32 value)
+{
+	unsigned int offset = IRR_OFFSET(idx);
+	unsigned int shift = IRR_SHIFT(idx);
+	u32 irr;
+
+	irr = readl(irr0 + offset) & ~(0xf << shift);
+	irr |= (value & 0xf) << shift;
+	writel(irr, irr0 + offset);
+}
+
 static void realtek_ictl_unmask_irq(struct irq_data *i)
 {
 	unsigned long flags;
@@ -62,8 +84,14 @@ static struct irq_chip realtek_ictl_irq = {
 
 static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
+	unsigned long flags;
+
 	irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
 
+	raw_spin_lock_irqsave(&irq_lock, flags);
+	write_irr(REG(RTL_ICTL_IRR0), hw, 1);
+	raw_spin_unlock_irqrestore(&irq_lock, flags);
+
 	return 0;
 }
 
@@ -95,90 +123,50 @@ static void realtek_irq_dispatch(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-/*
- * SoC interrupts are cascaded to MIPS CPU interrupts according to the
- * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
- * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
- * thus go into 4 IRRs. A routing value of '0' means the interrupt is left
- * disconnected. Routing values {1..15} connect to output lines {0..14}.
- */
-static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
-{
-	struct device_node *cpu_ictl;
-	const __be32 *imap;
-	u32 imaplen, soc_int, cpu_int, tmp, regs[4];
-	int ret, i, irr_regs[] = {
-		RTL_ICTL_IRR3,
-		RTL_ICTL_IRR2,
-		RTL_ICTL_IRR1,
-		RTL_ICTL_IRR0,
-	};
-	u8 mips_irqs_set;
-
-	ret = of_property_read_u32(node, "#address-cells", &tmp);
-	if (ret || tmp)
-		return -EINVAL;
-
-	imap = of_get_property(node, "interrupt-map", &imaplen);
-	if (!imap || imaplen % 3)
-		return -EINVAL;
-
-	mips_irqs_set = 0;
-	memset(regs, 0, sizeof(regs));
-	for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
-		soc_int = be32_to_cpup(imap);
-		if (soc_int > 31)
-			return -EINVAL;
-
-		cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
-		if (!cpu_ictl)
-			return -EINVAL;
-		ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
-		of_node_put(cpu_ictl);
-		if (ret || tmp != 1)
-			return -EINVAL;
-
-		cpu_int = be32_to_cpup(imap + 2);
-		if (cpu_int > 7 || cpu_int < 2)
-			return -EINVAL;
-
-		if (!(mips_irqs_set & BIT(cpu_int))) {
-			irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
-							 domain);
-			mips_irqs_set |= BIT(cpu_int);
-		}
-
-		/* Use routing values (1..6) for CPU interrupts (2..7) */
-		regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32;
-		imap += 3;
-	}
-
-	for (i = 0; i < 4; i++)
-		writel(regs[i], REG(irr_regs[i]));
-
-	return 0;
-}
-
 static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
 {
+	struct of_phandle_args oirq;
 	struct irq_domain *domain;
-	int ret;
+	unsigned int soc_irq;
+	int parent_irq;
 
 	realtek_ictl_base = of_iomap(node, 0);
 	if (!realtek_ictl_base)
 		return -ENXIO;
 
-	/* Disable all cascaded interrupts */
+	/* Disable all cascaded interrupts and clear routing */
 	writel(0, REG(RTL_ICTL_GIMR));
+	for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++)
+		write_irr(REG(RTL_ICTL_IRR0), soc_irq, 0);
+
+	if (WARN_ON(!of_irq_count(node))) {
+		/*
+		 * If DT contains no parent interrupts, assume MIPS CPU IRQ 2
+		 * (HW0) is connected to the first output. This is the case for
+		 * all known hardware anyway. "interrupt-map" is deprecated, so
+		 * don't bother trying to parse that.
+		 */
+		oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller");
+		oirq.args_count = 1;
+		oirq.args[0] = 2;
+
+		parent_irq = irq_create_of_mapping(&oirq);
+
+		of_node_put(oirq.np);
+	} else {
+		parent_irq = of_irq_get(node, 0);
+	}
 
-	domain = irq_domain_add_simple(node, 32, 0,
-				       &irq_domain_ops, NULL);
+	if (parent_irq < 0)
+		return parent_irq;
+	else if (!parent_irq)
+		return -ENODEV;
 
-	ret = map_interrupts(node, domain);
-	if (ret) {
-		pr_err("invalid interrupt map\n");
-		return ret;
-	}
+	domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, NULL);
+	if (!domain)
+		return -ENOMEM;
+
+	irq_set_chained_handler_and_data(parent_irq, realtek_irq_dispatch, domain);
 
 	return 0;
 }

drivers/pinctrl/pinctrl-amd.c

@@ -639,7 +639,7 @@ static bool do_amd_gpio_irq_handler(int irq, void *dev_id)
 			if (!(regval & PIN_IRQ_PENDING) ||
 			    !(regval & BIT(INTERRUPT_MASK_OFF)))
 				continue;
-			generic_handle_domain_irq(gc->irq.domain, irqnr + i);
+			generic_handle_domain_irq_safe(gc->irq.domain, irqnr + i);
 
 			/* Clear interrupt.
 			 * We must read the pin register again, in case the

drivers/platform/x86/intel/int0002_vgpio.c

@@ -125,8 +125,7 @@ static irqreturn_t int0002_irq(int irq, void *data)
 	if (!(gpe_sts_reg & GPE0A_PME_B0_STS_BIT))
 		return IRQ_NONE;
 
-	generic_handle_irq(irq_find_mapping(chip->irq.domain,
-					    GPE0A_PME_B0_VIRT_GPIO_PIN));
+	generic_handle_domain_irq_safe(chip->irq.domain, GPE0A_PME_B0_VIRT_GPIO_PIN);
 
 	pm_wakeup_hard_event(chip->parent);
 

drivers/ssb/driver_gpio.c

@@ -132,7 +132,8 @@ static irqreturn_t ssb_gpio_irq_chipco_handler(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	for_each_set_bit(gpio, &irqs, bus->gpio.ngpio)
-		generic_handle_irq(ssb_gpio_to_irq(&bus->gpio, gpio));
+		generic_handle_domain_irq_safe(bus->irq_domain, gpio);
+
 	ssb_chipco_gpio_polarity(chipco, irqs, val & irqs);
 
 	return IRQ_HANDLED;
@@ -330,7 +331,8 @@ static irqreturn_t ssb_gpio_irq_extif_handler(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	for_each_set_bit(gpio, &irqs, bus->gpio.ngpio)
-		generic_handle_irq(ssb_gpio_to_irq(&bus->gpio, gpio));
+		generic_handle_domain_irq_safe(bus->irq_domain, gpio);
+
 	ssb_extif_gpio_polarity(extif, irqs, val & irqs);
 
 	return IRQ_HANDLED;

include/linux/irqchip.h

@@ -44,7 +44,8 @@ static const struct of_device_id drv_name##_irqchip_match_table[] = {
 #define IRQCHIP_MATCH(compat, fn) { .compatible = compat,		\
 				    .data = typecheck_irq_init_cb(fn), },
 
-#define IRQCHIP_PLATFORM_DRIVER_END(drv_name)				\
+
+#define IRQCHIP_PLATFORM_DRIVER_END(drv_name, ...)			\
 	{},								\
 };									\
 MODULE_DEVICE_TABLE(of, drv_name##_irqchip_match_table);		\
@@ -56,6 +57,7 @@ static struct platform_driver drv_name##_driver = {			\
 		.owner = THIS_MODULE,					\
 		.of_match_table = drv_name##_irqchip_match_table,	\
 		.suppress_bind_attrs = true,				\
+		__VA_ARGS__						\
 	},								\
 };									\
 builtin_platform_driver(drv_name##_driver)

include/linux/irqdesc.h

@@ -169,6 +169,7 @@ int generic_handle_irq_safe(unsigned int irq);
  * conversion failed.
  */
 int generic_handle_domain_irq(struct irq_domain *domain, unsigned int hwirq);
+int generic_handle_domain_irq_safe(struct irq_domain *domain, unsigned int hwirq);
 int generic_handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq);
 #endif
 

include/linux/of_irq.h

@@ -37,9 +37,8 @@ extern unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data);
 extern int of_irq_to_resource(struct device_node *dev, int index,
 			      struct resource *r);
 
-extern void of_irq_init(const struct of_device_id *matches);
-
 #ifdef CONFIG_OF_IRQ
+extern void of_irq_init(const struct of_device_id *matches);
 extern int of_irq_parse_one(struct device_node *device, int index,
 			  struct of_phandle_args *out_irq);
 extern int of_irq_count(struct device_node *dev);
@@ -57,6 +56,9 @@ extern struct irq_domain *of_msi_map_get_device_domain(struct device *dev,
 extern void of_msi_configure(struct device *dev, struct device_node *np);
 u32 of_msi_map_id(struct device *dev, struct device_node *msi_np, u32 id_in);
 #else
+static inline void of_irq_init(const struct of_device_id *matches)
+{
+}
 static inline int of_irq_parse_one(struct device_node *device, int index,
 				   struct of_phandle_args *out_irq)
 {

kernel/irq/irqdesc.c

@@ -705,6 +705,30 @@ int generic_handle_domain_irq(struct irq_domain *domain, unsigned int hwirq)
 }
 EXPORT_SYMBOL_GPL(generic_handle_domain_irq);
 
+ /**
+ * generic_handle_irq_safe - Invoke the handler for a HW irq belonging
+ *			     to a domain from any context.
+ * @domain:	The domain where to perform the lookup
+ * @hwirq:	The HW irq number to convert to a logical one
+ *
+ * Returns:	0 on success, a negative value on error.
+ *
+ * This function can be called from any context (IRQ or process
+ * context). If the interrupt is marked as 'enforce IRQ-context only' then
+ * the function must be invoked from hard interrupt context.
+ */
+int generic_handle_domain_irq_safe(struct irq_domain *domain, unsigned int hwirq)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = handle_irq_desc(irq_resolve_mapping(domain, hwirq));
+	local_irq_restore(flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(generic_handle_domain_irq_safe);
+
 /**
  * generic_handle_domain_nmi - Invoke the handler for a HW nmi belonging
  *                             to a domain.