Merge git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/linux-staging into staging-next

* git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/linux-staging:
  staging: rt2860sta and rt2870sta: Remove drivers replaced in net/wireless
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -67,10 +67,6 @@ source "drivers/staging/echo/Kconfig"
 
 source "drivers/staging/brcm80211/Kconfig"
 
-source "drivers/staging/rt2860/Kconfig"
-
-source "drivers/staging/rt2870/Kconfig"
-
 source "drivers/staging/comedi/Kconfig"
 
 source "drivers/staging/olpc_dcon/Kconfig"

drivers/staging/Makefile

@@ -18,8 +18,6 @@ obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_BRCMSMAC)		+= brcm80211/
 obj-$(CONFIG_BRCMFMAC)		+= brcm80211/
-obj-$(CONFIG_RT2860)		+= rt2860/
-obj-$(CONFIG_RT2870)		+= rt2870/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc_dcon/
 obj-$(CONFIG_ASUS_OLED)		+= asus_oled/

drivers/staging/rt2860/Kconfig

-config RT2860
-	tristate "Ralink 2860/3090 wireless support"
-	depends on PCI && X86 && WLAN
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	select CRC_CCITT
-	select FW_LOADER
-	---help---
-	  This is an experimental driver for the Ralink 2860 and 3090
-	  wireless chips.

drivers/staging/rt2860/Makefile

-obj-$(CONFIG_RT2860)	+= rt2860sta.o
-
-# TODO: all of these should be removed
-ccflags-y := -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
-ccflags-y += -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRT2860
-ccflags-y += -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRT30xx -DRT3090
-ccflags-y += -DDBG
-
-rt2860sta-y :=	\
-	common/crypt_md5.o	\
-	common/crypt_sha2.o	\
-	common/crypt_hmac.o	\
-	common/mlme.o		\
-	common/cmm_wep.o	\
-	common/action.o		\
-	common/cmm_data.o	\
-	common/rtmp_init.o	\
-	common/cmm_tkip.o	\
-	common/cmm_aes.o	\
-	common/cmm_sync.o	\
-	common/eeprom.o		\
-	common/cmm_sanity.o	\
-	common/cmm_info.o	\
-	common/cmm_cfg.o	\
-	common/cmm_wpa.o	\
-	common/dfs.o		\
-	common/spectrum.o	\
-	common/rtmp_timer.o	\
-	common/rt_channel.o	\
-	common/cmm_asic.o	\
-	sta/assoc.o		\
-	sta/auth.o		\
-	sta/auth_rsp.o		\
-	sta/sync.o		\
-	sta/sanity.o		\
-	sta/rtmp_data.o		\
-	sta/connect.o		\
-	sta/wpa.o		\
-	rt_linux.o		\
-	rt_main_dev.o		\
-	sta_ioctl.o		\
-	common/ba_action.o	\
-	pci_main_dev.o		\
-	rt_pci_rbus.o		\
-	common/cmm_mac_pci.o	\
-	common/cmm_data_pci.o	\
-	common/ee_prom.o	\
-	common/rtmp_mcu.o	\
-	common/ee_efuse.o	\
-	chips/rt30xx.o		\
-	common/rt_rf.o		\
-	chips/rt3090.o

drivers/staging/rt2860/TODO

-I'm hesitant to add a TODO file here, as the wireless developers would
-really have people help them out on the "clean" rt2860 driver that can
-be found at the http://rt2x00.serialmonkey.com/ site.
-
-But, if you wish to clean up this driver instead, here's a short list of
-things that need to be done to get it into a more mergable shape:
-
-TODO:
-	- checkpatch.pl clean
-	- sparse clean
-	- port to in-kernel 80211 stack and common rt2x00 infrastructure
-	- review by the wireless developer community
-
-Please send any patches or complaints about this driver to Greg
-Kroah-Hartman <greg@kroah.com> and don't bother the upstream wireless
-kernel developers about it, they want nothing to do with it.

drivers/staging/rt2860/ap.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-Module Name:
-ap.h
-
-Abstract:
-Miniport generic portion header file
-
-Revision History:
-Who         When          What
---------    ----------    ----------------------------------------------
-Paul Lin    08-01-2002    created
-James Tan   09-06-2002    modified (Revise NTCRegTable)
-John Chang  12-22-2004    modified for RT2561/2661. merge with STA driver
-*/
-#ifndef __AP_H__
-#define __AP_H__
-
-/* ap_wpa.c */
-void WpaStateMachineInit(struct rt_rtmp_adapter *pAd,
-			 struct rt_state_machine *Sm,
-			 OUT STATE_MACHINE_FUNC Trans[]);
-
-#ifdef RTMP_MAC_USB
-void BeaconUpdateExec(void *SystemSpecific1,
-		      void *FunctionContext,
-		      void *SystemSpecific2, void *SystemSpecific3);
-#endif /* RTMP_MAC_USB // */
-
-void RTMPSetPiggyBack(struct rt_rtmp_adapter *pAd, IN BOOLEAN bPiggyBack);
-
-void MacTableReset(struct rt_rtmp_adapter *pAd);
-
-struct rt_mac_table_entry *MacTableInsertEntry(struct rt_rtmp_adapter *pAd,
-				     u8 *pAddr,
-				     u8 apidx, IN BOOLEAN CleanAll);
-
-BOOLEAN MacTableDeleteEntry(struct rt_rtmp_adapter *pAd,
-			    u16 wcid, u8 *pAddr);
-
-struct rt_mac_table_entry *MacTableLookup(struct rt_rtmp_adapter *pAd,
-								u8 *pAddr);
-
-#endif /* __AP_H__ */

drivers/staging/rt2860/chip/rt2860.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __RT2860_H__
-#define __RT2860_H__
-
-#include "mac_pci.h"
-
-#ifndef RTMP_PCI_SUPPORT
-#error "For RT2860, you should define the compile flag -DRTMP_PCI_SUPPORT"
-#endif
-
-#ifndef RTMP_MAC_PCI
-#error "For RT2880, you should define the compile flag -DRTMP_MAC_PCI"
-#endif
-
-/* */
-/* Device ID & Vendor ID, these values should match EEPROM value */
-/* */
-#define NIC2860_PCI_DEVICE_ID	0x0601
-#define NIC2860_PCIe_DEVICE_ID	0x0681
-#define NIC2760_PCI_DEVICE_ID	0x0701	/* 1T/2R Cardbus ??? */
-#define NIC2790_PCIe_DEVICE_ID  0x0781	/* 1T/2R miniCard */
-
-#define VEN_AWT_PCIe_DEVICE_ID	0x1059
-#define VEN_AWT_PCI_VENDOR_ID		0x1A3B
-
-#define EDIMAX_PCI_VENDOR_ID		0x1432
-
-#endif /*__RT2860_H__ // */

drivers/staging/rt2860/chip/rt2870.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-#ifndef __RT2870_H__
-#define __RT2870_H__
-
-#ifdef RT2870
-
-#ifndef RTMP_USB_SUPPORT
-#error "For RT2870, you should define the compile flag -DRTMP_USB_SUPPORT"
-#endif
-
-#ifndef RTMP_MAC_USB
-#error "For RT2870, you should define the compile flag -DRTMP_MAC_USB"
-#endif
-
-#include "../rtmp_type.h"
-#include "mac_usb.h"
-
-/*#define RTMP_CHIP_NAME                "RT2870" */
-
-#endif /* RT2870 // */
-#endif /*__RT2870_H__ // */

drivers/staging/rt2860/chip/rt3070.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	rt3070.h
-
-    Abstract:
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
- */
-
-#ifndef __RT3070_H__
-#define __RT3070_H__
-
-#ifdef RT3070
-
-#ifndef RTMP_USB_SUPPORT
-#error "For RT3070, you should define the compile flag -DRTMP_USB_SUPPORT"
-#endif
-
-#ifndef RTMP_MAC_USB
-#error "For RT3070, you should define the compile flag -DRTMP_MAC_USB"
-#endif
-
-#ifndef RTMP_RF_RW_SUPPORT
-#error "For RT3070, you should define the compile flag -DRTMP_RF_RW_SUPPORT"
-#endif
-
-#ifndef RT30xx
-#error "For RT3070, you should define the compile flag -DRT30xx"
-#endif
-
-#include "mac_usb.h"
-#include "rt30xx.h"
-
-/* */
-/* Device ID & Vendor ID, these values should match EEPROM value */
-/* */
-
-#endif /* RT3070 // */
-
-#endif /*__RT3070_H__ // */

drivers/staging/rt2860/chip/rt3090.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	rt3090.h
-
-    Abstract:
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
- */
-
-#ifndef __RT3090_H__
-#define __RT3090_H__
-
-#ifdef RT3090
-
-#ifndef RTMP_PCI_SUPPORT
-#error "For RT3090, you should define the compile flag -DRTMP_PCI_SUPPORT"
-#endif
-
-#ifndef RTMP_MAC_PCI
-#error "For RT3090, you should define the compile flag -DRTMP_MAC_PCI"
-#endif
-
-#ifndef RTMP_RF_RW_SUPPORT
-#error "For RT3090, you should define the compile flag -DRTMP_RF_RW_SUPPORT"
-#endif
-
-#ifndef RT30xx
-#error "For RT3090, you should define the compile flag -DRT30xx"
-#endif
-
-#define PCIE_PS_SUPPORT
-
-#include "mac_pci.h"
-#include "rt30xx.h"
-
-/* */
-/* Device ID & Vendor ID, these values should match EEPROM value */
-/* */
-#define NIC3090_PCIe_DEVICE_ID  0x3090	/* 1T/1R miniCard */
-#define NIC3091_PCIe_DEVICE_ID  0x3091	/* 1T/2R miniCard */
-#define NIC3092_PCIe_DEVICE_ID  0x3092	/* 2T/2R miniCard */
-
-#endif /* RT3090 // */
-
-#endif /*__RT3090_H__ // */

drivers/staging/rt2860/chip/rt30xx.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	rt30xx.h
-
-    Abstract:
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
- */
-
-#ifndef __RT30XX_H__
-#define __RT30XX_H__
-
-#ifdef RT30xx
-
-extern struct rt_reg_pair RT30xx_RFRegTable[];
-extern u8 NUM_RF_REG_PARMS;
-
-#endif /* RT30xx // */
-
-#endif /*__RT30XX_H__ // */

drivers/staging/rt2860/chips/rt3070.c

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rt3070.c
-
-	Abstract:
-	Specific funcitons and variables for RT3070
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-*/
-
-#ifdef RT3070
-
-#include "../rt_config.h"
-
-#ifndef RTMP_RF_RW_SUPPORT
-#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
-#endif /* RTMP_RF_RW_SUPPORT // */
-
-void NICInitRT3070RFRegisters(struct rt_rtmp_adapter *pAd)
-{
-	int i;
-	u8 RFValue;
-
-	/* Driver must read EEPROM to get RfIcType before initial RF registers */
-	/* Initialize RF register to default value */
-	if (IS_RT3070(pAd) || IS_RT3071(pAd)) {
-		/* Init RF calibration */
-		/* Driver should toggle RF R30 bit7 before init RF registers */
-		u32 RfReg = 0;
-		u32 data;
-
-		RT30xxReadRFRegister(pAd, RF_R30, (u8 *)&RfReg);
-		RfReg |= 0x80;
-		RT30xxWriteRFRegister(pAd, RF_R30, (u8)RfReg);
-		RTMPusecDelay(1000);
-		RfReg &= 0x7F;
-		RT30xxWriteRFRegister(pAd, RF_R30, (u8)RfReg);
-
-		/* Initialize RF register to default value */
-		for (i = 0; i < NUM_RF_REG_PARMS; i++) {
-			RT30xxWriteRFRegister(pAd,
-					      RT30xx_RFRegTable[i].Register,
-					      RT30xx_RFRegTable[i].Value);
-		}
-
-		/* add by johnli */
-		if (IS_RT3070(pAd)) {
-			/* */
-			/* The DAC issue(LDO_CFG0) has been fixed in RT3070(F). */
-			/* The voltage raising patch is no longer needed for RT3070(F) */
-			/* */
-			if ((pAd->MACVersion & 0xffff) < 0x0201) {
-				/*  Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate */
-				RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
-				data = ((data & 0xF0FFFFFF) | 0x0D000000);
-				RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
-			}
-		} else if (IS_RT3071(pAd)) {
-			/* Driver should set RF R6 bit6 on before init RF registers */
-			RT30xxReadRFRegister(pAd, RF_R06, (u8 *)&RfReg);
-			RfReg |= 0x40;
-			RT30xxWriteRFRegister(pAd, RF_R06, (u8)RfReg);
-
-			/* init R31 */
-			RT30xxWriteRFRegister(pAd, RF_R31, 0x14);
-
-			/* RT3071 version E has fixed this issue */
-			if ((pAd->NicConfig2.field.DACTestBit == 1)
-			    && ((pAd->MACVersion & 0xffff) < 0x0211)) {
-				/* patch tx EVM issue temporarily */
-				RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
-				data = ((data & 0xE0FFFFFF) | 0x0D000000);
-				RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
-			} else {
-				RTMP_IO_READ32(pAd, LDO_CFG0, &data);
-				data = ((data & 0xE0FFFFFF) | 0x01000000);
-				RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
-			}
-
-			/* patch LNA_PE_G1 failed issue */
-			RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data);
-			data &= ~(0x20);
-			RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
-		}
-		/*For RF filter Calibration */
-		RTMPFilterCalibration(pAd);
-
-		/* Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() */
-		/* */
-		/* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */
-		/* Raising RF voltage is no longer needed for RT3070(F) */
-		/* */
-		if ((IS_RT3070(pAd)) && ((pAd->MACVersion & 0xffff) < 0x0201)) {
-			RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
-		} else if ((IS_RT3071(pAd))
-			   && ((pAd->MACVersion & 0xffff) < 0x0211)) {
-			RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
-		}
-		/* set led open drain enable */
-		RTUSBReadMACRegister(pAd, OPT_14, &data);
-		data |= 0x01;
-		RTUSBWriteMACRegister(pAd, OPT_14, data);
-
-		/* move from RT30xxLoadRFNormalModeSetup because it's needed for both RT3070 and RT3071 */
-		/* TX_LO1_en, RF R17 register Bit 3 to 0 */
-		RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
-		RFValue &= (~0x08);
-		/* to fix rx long range issue */
-		if (pAd->NicConfig2.field.ExternalLNAForG == 0) {
-			if ((IS_RT3071(pAd)
-			     && ((pAd->MACVersion & 0xffff) >= 0x0211))
-			    || IS_RT3070(pAd)) {
-				RFValue |= 0x20;
-			}
-		}
-		/* set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h */
-		if (pAd->TxMixerGain24G >= 1) {
-			RFValue &= (~0x7);	/* clean bit [2:0] */
-			RFValue |= pAd->TxMixerGain24G;
-		}
-		RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
-
-		if (IS_RT3071(pAd)) {
-			/* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
-			RT30xxLoadRFNormalModeSetup(pAd);
-		} else if (IS_RT3070(pAd)) {
-			/* add by johnli, reset RF_R27 when interface down & up to fix throughput problem */
-			/* LDORF_VC, RF R27 register Bit 2 to 0 */
-			RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
-			/* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */
-			/* Raising RF voltage is no longer needed for RT3070(F) */
-			if ((pAd->MACVersion & 0xffff) < 0x0201)
-				RFValue = (RFValue & (~0x77)) | 0x3;
-			else
-				RFValue = (RFValue & (~0x77));
-			RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
-			/* end johnli */
-		}
-	}
-
-}
-#endif /* RT3070 // */

drivers/staging/rt2860/chips/rt3090.c

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rt3090.c
-
-	Abstract:
-	Specific functions and variables for RT3070
-
-	Revision History:
-	Who         		When            What
-	Justin P. Mattock	11/07/2010	Fix a typo
-	--------    ----------    ----------------------------------------------
-*/
-
-#ifdef RT3090
-
-#include "../rt_config.h"
-
-#ifndef RTMP_RF_RW_SUPPORT
-#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
-#endif /* RTMP_RF_RW_SUPPORT // */
-
-void NICInitRT3090RFRegisters(struct rt_rtmp_adapter *pAd)
-{
-	int i;
-	/* Driver must read EEPROM to get RfIcType before initial RF registers */
-	/* Initialize RF register to default value */
-	if (IS_RT3090(pAd)) {
-		/* Init RF calibration */
-		/* Driver should toggle RF R30 bit7 before init RF registers */
-		u8 RfReg;
-		u32 data;
-
-		RT30xxReadRFRegister(pAd, RF_R30, (u8 *)&RfReg);
-		RfReg |= 0x80;
-		RT30xxWriteRFRegister(pAd, RF_R30, (u8)RfReg);
-		RTMPusecDelay(1000);
-		RfReg &= 0x7F;
-		RT30xxWriteRFRegister(pAd, RF_R30, (u8)RfReg);
-
-		/* init R24, R31 */
-		RT30xxWriteRFRegister(pAd, RF_R24, 0x0F);
-		RT30xxWriteRFRegister(pAd, RF_R31, 0x0F);
-
-		/* RT309x version E has fixed this issue */
-		if ((pAd->NicConfig2.field.DACTestBit == 1)
-		    && ((pAd->MACVersion & 0xffff) < 0x0211)) {
-			/* patch tx EVM issue temporarily */
-			RTMP_IO_READ32(pAd, LDO_CFG0, &data);
-			data = ((data & 0xE0FFFFFF) | 0x0D000000);
-			RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
-		} else {
-			RTMP_IO_READ32(pAd, LDO_CFG0, &data);
-			data = ((data & 0xE0FFFFFF) | 0x01000000);
-			RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
-		}
-
-		/* patch LNA_PE_G1 failed issue */
-		RTMP_IO_READ32(pAd, GPIO_SWITCH, &data);
-		data &= ~(0x20);
-		RTMP_IO_WRITE32(pAd, GPIO_SWITCH, data);
-
-		/* Initialize RF register to default value */
-		for (i = 0; i < NUM_RF_REG_PARMS; i++) {
-			RT30xxWriteRFRegister(pAd,
-					      RT30xx_RFRegTable[i].Register,
-					      RT30xx_RFRegTable[i].Value);
-		}
-
-		/* Driver should set RF R6 bit6 on before calibration */
-		RT30xxReadRFRegister(pAd, RF_R06, (u8 *)&RfReg);
-		RfReg |= 0x40;
-		RT30xxWriteRFRegister(pAd, RF_R06, (u8)RfReg);
-
-		/*For RF filter Calibration */
-		RTMPFilterCalibration(pAd);
-
-		/* Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() */
-		if ((pAd->MACVersion & 0xffff) < 0x0211)
-			RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
-
-		/* set led open drain enable */
-		RTMP_IO_READ32(pAd, OPT_14, &data);
-		data |= 0x01;
-		RTMP_IO_WRITE32(pAd, OPT_14, data);
-
-		/* set default antenna as main */
-		if (pAd->RfIcType == RFIC_3020)
-			AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-
-		/* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
-		RT30xxLoadRFNormalModeSetup(pAd);
-	}
-
-}
-
-#endif /* RT3090 // */

drivers/staging/rt2860/chlist.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	chlist.c
-
-	Abstract:
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Fonchi Wu   2007-12-19    created
-*/
-
-#ifndef __CHLIST_H__
-#define __CHLIST_H__
-
-#include "rtmp_type.h"
-#include "rtmp_def.h"
-
-#define ODOR			0
-#define IDOR			1
-#define BOTH			2
-
-#define BAND_5G         0
-#define BAND_24G        1
-#define BAND_BOTH       2
-
-struct rt_ch_desp {
-	u8 FirstChannel;
-	u8 NumOfCh;
-	char MaxTxPwr;		/* dBm */
-	u8 Geography;	/* 0:out door, 1:in door, 2:both */
-	BOOLEAN DfsReq;		/* Dfs require, 0: No, 1: yes. */
-};
-
-struct rt_ch_region {
-	u8 CountReg[3];
-	u8 DfsType;		/* 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56 */
-	struct rt_ch_desp ChDesp[10];
-};
-
-extern struct rt_ch_region ChRegion[];
-
-struct rt_ch_freq_map {
-	u16 channel;
-	u16 freqKHz;
-};
-
-extern struct rt_ch_freq_map CH_HZ_ID_MAP[];
-extern int CH_HZ_ID_MAP_NUM;
-
-#define     MAP_CHANNEL_ID_TO_KHZ(_ch, _khz)		\
-		do {							\
-			int _chIdx;					\
-			for (_chIdx = 0; _chIdx < CH_HZ_ID_MAP_NUM; _chIdx++) {\
-				if ((_ch) == CH_HZ_ID_MAP[_chIdx].channel) { \
-					(_khz) = CH_HZ_ID_MAP[_chIdx].freqKHz * 1000;\
-					break;				\
-				}					\
-			}						\
-			if (_chIdx == CH_HZ_ID_MAP_NUM)	\
-				(_khz) = 2412000;		\
-		} while (0)
-
-#define     MAP_KHZ_TO_CHANNEL_ID(_khz, _ch)                 \
-		do {							\
-			int _chIdx;				\
-			for (_chIdx = 0; _chIdx < CH_HZ_ID_MAP_NUM; _chIdx++) {\
-				if ((_khz) == CH_HZ_ID_MAP[_chIdx].freqKHz) {\
-					(_ch) = CH_HZ_ID_MAP[_chIdx].channel; \
-					break;			\
-				}					\
-			}						\
-			if (_chIdx == CH_HZ_ID_MAP_NUM)			\
-				(_ch) = 1;				\
-		} while (0)
-
-void BuildChannelListEx(struct rt_rtmp_adapter *pAd);
-
-void BuildBeaconChList(struct rt_rtmp_adapter *pAd,
-		       u8 *pBuf, unsigned long *pBufLen);
-
-void N_ChannelCheck(struct rt_rtmp_adapter *pAd);
-
-void N_SetCenCh(struct rt_rtmp_adapter *pAd);
-
-u8 GetCuntryMaxTxPwr(struct rt_rtmp_adapter *pAd, u8 channel);
-
-#endif /* __CHLIST_H__ */

drivers/staging/rt2860/common/action.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	aironet.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	Paul Lin	04-06-15		Initial
-*/
-
-#ifndef	__ACTION_H__
-#define	__ACTION_H__
-
-struct PACKED rt_ht_information_octet {
-	u8 Request:1;
-	u8 Forty_MHz_Intolerant:1;
-	u8 STA_Channel_Width:1;
-	u8 Reserved:5;
-};
-
-struct PACKED rt_frame_ht_info {
-	struct rt_header_802_11 Hdr;
-	u8 Category;
-	u8 Action;
-	struct rt_ht_information_octet HT_Info;
-};
-
-#endif /* __ACTION_H__ */

drivers/staging/rt2860/common/cmm_cfg.c

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	cmm_cfg.c
-
-    Abstract:
-    Ralink WiFi Driver configuration related subroutines
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
-*/
-
-#include "../rt_config.h"
-
-char *GetPhyMode(int Mode)
-{
-	switch (Mode) {
-	case MODE_CCK:
-		return "CCK";
-
-	case MODE_OFDM:
-		return "OFDM";
-	case MODE_HTMIX:
-		return "HTMIX";
-
-	case MODE_HTGREENFIELD:
-		return "GREEN";
-	default:
-		return "N/A";
-	}
-}
-
-char *GetBW(int BW)
-{
-	switch (BW) {
-	case BW_10:
-		return "10M";
-
-	case BW_20:
-		return "20M";
-	case BW_40:
-		return "40M";
-	default:
-		return "N/A";
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Country Region to pAd->CommonCfg.CountryRegion.
-        This command will not work, if the field of CountryRegion in eeprom is programmed.
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-int RT_CfgSetCountryRegion(struct rt_rtmp_adapter *pAd, char *arg, int band)
-{
-	long region, regionMax;
-	u8 *pCountryRegion;
-
-	region = simple_strtol(arg, 0, 10);
-
-	if (band == BAND_24G) {
-		pCountryRegion = &pAd->CommonCfg.CountryRegion;
-		regionMax = REGION_MAXIMUM_BG_BAND;
-	} else {
-		pCountryRegion = &pAd->CommonCfg.CountryRegionForABand;
-		regionMax = REGION_MAXIMUM_A_BAND;
-	}
-
-	/* TODO: Is it neccesay for following check??? */
-	/* Country can be set only when EEPROM not programmed */
-	if (*pCountryRegion & 0x80) {
-		DBGPRINT(RT_DEBUG_ERROR,
-			 ("CfgSetCountryRegion():CountryRegion in eeprom was programmed\n"));
-		return FALSE;
-	}
-
-	if ((region >= 0) && (region <= REGION_MAXIMUM_BG_BAND)) {
-		*pCountryRegion = (u8)region;
-	} else if ((region == REGION_31_BG_BAND) && (band == BAND_24G)) {
-		*pCountryRegion = (u8)region;
-	} else {
-		DBGPRINT(RT_DEBUG_ERROR,
-			 ("CfgSetCountryRegion():region(%ld) out of range!\n",
-			  region));
-		return FALSE;
-	}
-
-	return TRUE;
-
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Wireless Mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-int RT_CfgSetWirelessMode(struct rt_rtmp_adapter *pAd, char *arg)
-{
-	int MaxPhyMode = PHY_11G;
-	long WirelessMode;
-
-	MaxPhyMode = PHY_11N_5G;
-
-	WirelessMode = simple_strtol(arg, 0, 10);
-	if (WirelessMode <= MaxPhyMode) {
-		pAd->CommonCfg.PhyMode = WirelessMode;
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-int RT_CfgSetShortSlot(struct rt_rtmp_adapter *pAd, char *arg)
-{
-	long ShortSlot;
-
-	ShortSlot = simple_strtol(arg, 0, 10);
-
-	if (ShortSlot == 1)
-		pAd->CommonCfg.bUseShortSlotTime = TRUE;
-	else if (ShortSlot == 0)
-		pAd->CommonCfg.bUseShortSlotTime = FALSE;
-	else
-		return FALSE;	/*Invalid argument */
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY base on KeyIdx
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-int RT_CfgSetWepKey(struct rt_rtmp_adapter *pAd,
-		    char *keyString,
-		    struct rt_cipher_key *pSharedKey, int keyIdx)
-{
-	int KeyLen;
-	int i;
-	u8 CipherAlg = CIPHER_NONE;
-	BOOLEAN bKeyIsHex = FALSE;
-
-	/* TODO: Shall we do memset for the original key info?? */
-	memset(pSharedKey, 0, sizeof(struct rt_cipher_key));
-	KeyLen = strlen(keyString);
-	switch (KeyLen) {
-	case 5:		/*wep 40 Ascii type */
-	case 13:		/*wep 104 Ascii type */
-		bKeyIsHex = FALSE;
-		pSharedKey->KeyLen = KeyLen;
-		NdisMoveMemory(pSharedKey->Key, keyString, KeyLen);
-		break;
-
-	case 10:		/*wep 40 Hex type */
-	case 26:		/*wep 104 Hex type */
-		for (i = 0; i < KeyLen; i++) {
-			if (!isxdigit(*(keyString + i)))
-				return FALSE;	/*Not Hex value; */
-		}
-		bKeyIsHex = TRUE;
-		pSharedKey->KeyLen = KeyLen / 2;
-		AtoH(keyString, pSharedKey->Key, pSharedKey->KeyLen);
-		break;
-
-	default:		/*Invalid argument */
-		DBGPRINT(RT_DEBUG_TRACE,
-			 ("RT_CfgSetWepKey(keyIdx=%d):Invalid argument (arg=%s)\n",
-			  keyIdx, keyString));
-		return FALSE;
-	}
-
-	pSharedKey->CipherAlg = ((KeyLen % 5) ? CIPHER_WEP128 : CIPHER_WEP64);
-	DBGPRINT(RT_DEBUG_TRACE,
-		 ("RT_CfgSetWepKey:(KeyIdx=%d,type=%s, Alg=%s)\n", keyIdx,
-		  (bKeyIsHex == FALSE ? "Ascii" : "Hex"),
-		  CipherName[CipherAlg]));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WPA PSK key
-
-    Arguments:
-        pAdapter	Pointer to our adapter
-        keyString	WPA pre-shared key string
-        pHashStr	String used for password hash function
-        hashStrLen	Length of the hash string
-        pPMKBuf		Output buffer of WPAPSK key
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-int RT_CfgSetWPAPSKKey(struct rt_rtmp_adapter *pAd,
-		       char *keyString,
-		       u8 * pHashStr,
-		       int hashStrLen, u8 *pPMKBuf)
-{
-	int keyLen;
-	u8 keyMaterial[40];
-
-	keyLen = strlen(keyString);
-	if ((keyLen < 8) || (keyLen > 64)) {
-		DBGPRINT(RT_DEBUG_TRACE,
-			 ("WPAPSK Key length(%d) error, required 8 ~ 64 characters!(keyStr=%s)\n",
-			  keyLen, keyString));
-		return FALSE;
-	}
-
-	memset(pPMKBuf, 0, 32);
-	if (keyLen == 64) {
-		AtoH(keyString, pPMKBuf, 32);
-	} else {
-		PasswordHash(keyString, pHashStr, hashStrLen, keyMaterial);
-		NdisMoveMemory(pPMKBuf, keyMaterial, 32);
-	}
-
-	return TRUE;
-}

drivers/staging/rt2860/common/crypt_hmac.c

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************/
-
-#include "../crypt_hmac.h"
-
-#ifdef HMAC_SHA1_SUPPORT
-/*
-========================================================================
-Routine Description:
-    HMAC using SHA1 hash function
-
-Arguments:
-    key             Secret key
-    key_len         The length of the key in bytes
-    message         Message context
-    message_len     The length of message in bytes
-    macLen          Request the length of message authentication code
-
-Return Value:
-    mac             Message authentication code
-
-Note:
-    None
-========================================================================
-*/
-void HMAC_SHA1(IN const u8 Key[],
-	       u32 KeyLen,
-	       IN const u8 Message[],
-	       u32 MessageLen, u8 MAC[], u32 MACLen)
-{
-	struct rt_sha1_ctx sha_ctx1;
-	struct rt_sha1_ctx sha_ctx2;
-	u8 K0[SHA1_BLOCK_SIZE];
-	u8 Digest[SHA1_DIGEST_SIZE];
-	u32 index;
-
-	NdisZeroMemory(&sha_ctx1, sizeof(struct rt_sha1_ctx));
-	NdisZeroMemory(&sha_ctx2, sizeof(struct rt_sha1_ctx));
-	/*
-	 * If the length of K = B(Block size): K0 = K.
-	 * If the length of K > B: hash K to obtain an L byte string,
-	 * then append (B-L) zeros to create a B-byte string K0 (i.e., K0 = H(K) || 00...00).
-	 * If the length of K < B: append zeros to the end of K to create a B-byte string K0
-	 */
-	NdisZeroMemory(K0, SHA1_BLOCK_SIZE);
-	if (KeyLen <= SHA1_BLOCK_SIZE)
-		NdisMoveMemory(K0, Key, KeyLen);
-	else
-		RT_SHA1(Key, KeyLen, K0);
-	/* End of if */
-
-	/* Exclusive-Or K0 with ipad */
-	/* ipad: Inner pad; the byte x¡¦36¡¦ repeated B times. */
-	for (index = 0; index < SHA1_BLOCK_SIZE; index++)
-		K0[index] ^= 0x36;
-	/* End of for */
-
-	RT_SHA1_Init(&sha_ctx1);
-	/* H(K0^ipad) */
-	SHA1_Append(&sha_ctx1, K0, sizeof(K0));
-	/* H((K0^ipad)||text) */
-	SHA1_Append(&sha_ctx1, Message, MessageLen);
-	SHA1_End(&sha_ctx1, Digest);
-
-	/* Exclusive-Or K0 with opad and remove ipad */
-	/* opad: Outer pad; the byte x¡¦5c¡¦ repeated B times. */
-	for (index = 0; index < SHA1_BLOCK_SIZE; index++)
-		K0[index] ^= 0x36 ^ 0x5c;
-	/* End of for */
-
-	RT_SHA1_Init(&sha_ctx2);
-	/* H(K0^opad) */
-	SHA1_Append(&sha_ctx2, K0, sizeof(K0));
-	/* H( (K0^opad) || H((K0^ipad)||text) ) */
-	SHA1_Append(&sha_ctx2, Digest, SHA1_DIGEST_SIZE);
-	SHA1_End(&sha_ctx2, Digest);
-
-	if (MACLen > SHA1_DIGEST_SIZE)
-		NdisMoveMemory(MAC, Digest, SHA1_DIGEST_SIZE);
-	else
-		NdisMoveMemory(MAC, Digest, MACLen);
-}				/* End of HMAC_SHA1 */
-#endif /* HMAC_SHA1_SUPPORT */
-
-#ifdef HMAC_MD5_SUPPORT
-/*
-========================================================================
-Routine Description:
-    HMAC using MD5 hash function
-
-Arguments:
-    key             Secret key
-    key_len         The length of the key in bytes
-    message         Message context
-    message_len     The length of message in bytes
-    macLen          Request the length of message authentication code
-
-Return Value:
-    mac             Message authentication code
-
-Note:
-    None
-========================================================================
-*/
-void HMAC_MD5(IN const u8 Key[],
-	      u32 KeyLen,
-	      IN const u8 Message[],
-	      u32 MessageLen, u8 MAC[], u32 MACLen)
-{
-	struct rt_md5_ctx_struc md5_ctx1;
-	struct rt_md5_ctx_struc md5_ctx2;
-	u8 K0[MD5_BLOCK_SIZE];
-	u8 Digest[MD5_DIGEST_SIZE];
-	u32 index;
-
-	NdisZeroMemory(&md5_ctx1, sizeof(struct rt_md5_ctx_struc));
-	NdisZeroMemory(&md5_ctx2, sizeof(struct rt_md5_ctx_struc));
-	/*
-	 * If the length of K = B(Block size): K0 = K.
-	 * If the length of K > B: hash K to obtain an L byte string,
-	 * then append (B-L) zeros to create a B-byte string K0 (i.e., K0 = H(K) || 00...00).
-	 * If the length of K < B: append zeros to the end of K to create a B-byte string K0
-	 */
-	NdisZeroMemory(K0, MD5_BLOCK_SIZE);
-	if (KeyLen <= MD5_BLOCK_SIZE) {
-		NdisMoveMemory(K0, Key, KeyLen);
-	} else {
-		RT_MD5(Key, KeyLen, K0);
-	}
-
-	/* Exclusive-Or K0 with ipad */
-	/* ipad: Inner pad; the byte x¡¦36¡¦ repeated B times. */
-	for (index = 0; index < MD5_BLOCK_SIZE; index++)
-		K0[index] ^= 0x36;
-	/* End of for */
-
-	MD5_Init(&md5_ctx1);
-	/* H(K0^ipad) */
-	MD5_Append(&md5_ctx1, K0, sizeof(K0));
-	/* H((K0^ipad)||text) */
-	MD5_Append(&md5_ctx1, Message, MessageLen);
-	MD5_End(&md5_ctx1, Digest);
-
-	/* Exclusive-Or K0 with opad and remove ipad */
-	/* opad: Outer pad; the byte x¡¦5c¡¦ repeated B times. */
-	for (index = 0; index < MD5_BLOCK_SIZE; index++)
-		K0[index] ^= 0x36 ^ 0x5c;
-	/* End of for */
-
-	MD5_Init(&md5_ctx2);
-	/* H(K0^opad) */
-	MD5_Append(&md5_ctx2, K0, sizeof(K0));
-	/* H( (K0^opad) || H((K0^ipad)||text) ) */
-	MD5_Append(&md5_ctx2, Digest, MD5_DIGEST_SIZE);
-	MD5_End(&md5_ctx2, Digest);
-
-	if (MACLen > MD5_DIGEST_SIZE)
-		NdisMoveMemory(MAC, Digest, MD5_DIGEST_SIZE);
-	else
-		NdisMoveMemory(MAC, Digest, MACLen);
-}				/* End of HMAC_SHA256 */
-#endif /* HMAC_MD5_SUPPORT */
-
-/* End of crypt_hmac.c */