Commit 60c140df authored by Lino Sanfilippo's avatar Lino Sanfilippo Committed by David S. Miller

net: ethernet: slicoss: add slicoss gigabit ethernet driver

Add driver for Alacritech gigabit ethernet cards with SLIC (session-layer
interface control) technology. The driver provides basic support without
SLIC for the following devices:

- Mojave cards (single port PCI Gigabit) both copper and fiber
- Oasis cards (single and dual port PCI-x Gigabit) copper and fiber
- Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber
Signed-off-by: default avatarLino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a297569f
......@@ -21,6 +21,7 @@ source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/adaptec/Kconfig"
source "drivers/net/ethernet/aeroflex/Kconfig"
source "drivers/net/ethernet/agere/Kconfig"
source "drivers/net/ethernet/alacritech/Kconfig"
source "drivers/net/ethernet/allwinner/Kconfig"
source "drivers/net/ethernet/alteon/Kconfig"
source "drivers/net/ethernet/altera/Kconfig"
......
......@@ -7,6 +7,7 @@ obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
obj-$(CONFIG_GRETH) += aeroflex/
obj-$(CONFIG_NET_VENDOR_AGERE) += agere/
obj-$(CONFIG_NET_VENDOR_ALACRITECH) += alacritech/
obj-$(CONFIG_NET_VENDOR_ALLWINNER) += allwinner/
obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
obj-$(CONFIG_ALTERA_TSE) += altera/
......
config NET_VENDOR_ALACRITECH
bool "Alacritech devices"
default y
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all the
questions about Alacritech devices. If you say Y, you will be asked
for your specific device in the following questions.
if NET_VENDOR_ALACRITECH
config SLICOSS
tristate "Alacritech Slicoss support"
depends on PCI
select CRC32
---help---
This driver supports Gigabit Ethernet adapters based on the
Session Layer Interface (SLIC) technology by Alacritech.
Supported are Mojave (1 port) and Oasis (1, 2 and 4 port) cards,
both copper and fiber.
To compile this driver as a module, choose M here: the module
will be called slicoss. This is recommended.
endif # NET_VENDOR_ALACRITECH
#
# Makefile for the Alacritech Slicoss driver
#
obj-$(CONFIG_SLICOSS) += slicoss.o
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment