ASoC: wm5100: replace codec to component

Now we can replace Codec to Component. Let's do it.

Note:
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 1	->	.idle_bias_on = 0
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/wm5100.h

@@ -17,7 +17,7 @@
 #include <sound/soc.h>
 #include <linux/regmap.h>
 
-int wm5100_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack);
+int wm5100_detect(struct snd_soc_component *component, struct snd_soc_jack *jack);
 
 #define WM5100_CLK_AIF1     1
 #define WM5100_CLK_AIF2     2

sound/soc/samsung/lowland.c

@@ -37,10 +37,10 @@ static struct snd_soc_jack_pin lowland_headset_pins[] = {
 
 static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_component *component = rtd->codec_dai->component;
 	int ret;
 
-	ret = snd_soc_codec_set_sysclk(codec, WM5100_CLK_SYSCLK,
+	ret = snd_soc_component_set_sysclk(component, WM5100_CLK_SYSCLK,
 				       WM5100_CLKSRC_MCLK1, MCLK1_RATE,
 				       SND_SOC_CLOCK_IN);
 	if (ret < 0) {
@@ -49,7 +49,7 @@ static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd)
 	}
 
 	/* Clock OPCLK, used by the other audio components. */
-	ret = snd_soc_codec_set_sysclk(codec, WM5100_CLK_OPCLK, 0,
+	ret = snd_soc_component_set_sysclk(component, WM5100_CLK_OPCLK, 0,
 				       CLKOUT_RATE, 0);
 	if (ret < 0) {
 		pr_err("Failed to set OPCLK rate: %d\n", ret);
@@ -63,19 +63,19 @@ static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd)
 	if (ret)
 		return ret;
 
-	wm5100_detect(codec, &lowland_headset);
+	wm5100_detect(component, &lowland_headset);
 
 	return 0;
 }
 
 static int lowland_wm9081_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_component *component = rtd->codec_dai->component;
 
 	snd_soc_dapm_nc_pin(&rtd->card->dapm, "LINEOUT");
 
 	/* At any time the WM9081 is active it will have this clock */
-	return snd_soc_codec_set_sysclk(codec, WM9081_SYSCLK_MCLK, 0,
+	return snd_soc_component_set_sysclk(component, WM9081_SYSCLK_MCLK, 0,
 					CLKOUT_RATE, 0);
 }