Commit 6166c246 authored by Felipe Balbi's avatar Felipe Balbi

usb: gadget: pxa25x_udc: convert to udc_start/udc_stop

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 1fb3b1cf
......@@ -996,9 +996,10 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
return -EOPNOTSUPP;
}
static int pxa25x_start(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
static int pxa25x_stop(struct usb_gadget_driver *driver);
static int pxa25x_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int pxa25x_udc_stop(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static const struct usb_gadget_ops pxa25x_udc_ops = {
.get_frame = pxa25x_udc_get_frame,
......@@ -1006,8 +1007,8 @@ static const struct usb_gadget_ops pxa25x_udc_ops = {
.vbus_session = pxa25x_udc_vbus_session,
.pullup = pxa25x_udc_pullup,
.vbus_draw = pxa25x_udc_vbus_draw,
.start = pxa25x_start,
.stop = pxa25x_stop,
.udc_start = pxa25x_udc_start,
.udc_stop = pxa25x_udc_stop,
};
/*-------------------------------------------------------------------------*/
......@@ -1254,23 +1255,12 @@ static void udc_enable (struct pxa25x_udc *dev)
* disconnect is reported. then a host may connect again, or
* the driver might get unbound.
*/
static int pxa25x_start(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
static int pxa25x_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
struct pxa25x_udc *dev = the_controller;
struct pxa25x_udc *dev = to_pxa25x(g);
int retval;
if (!driver
|| driver->max_speed < USB_SPEED_FULL
|| !bind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
if (dev->driver)
return -EBUSY;
/* first hook up the driver ... */
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
......@@ -1278,34 +1268,20 @@ static int pxa25x_start(struct usb_gadget_driver *driver,
retval = device_add (&dev->gadget.dev);
if (retval) {
fail:
dev->driver = NULL;
dev->gadget.dev.driver = NULL;
return retval;
}
retval = bind(&dev->gadget, driver);
if (retval) {
DMSG("bind to driver %s --> error %d\n",
driver->driver.name, retval);
device_del (&dev->gadget.dev);
goto fail;
}
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
DMSG("registered gadget driver '%s'\n", driver->driver.name);
/* connect to bus through transceiver */
if (!IS_ERR_OR_NULL(dev->transceiver)) {
retval = otg_set_peripheral(dev->transceiver->otg,
&dev->gadget);
if (retval) {
DMSG("can't bind to transceiver\n");
if (driver->unbind)
driver->unbind(&dev->gadget);
if (retval)
goto bind_fail;
}
}
pullup(dev);
......@@ -1334,22 +1310,14 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
}
del_timer_sync(&dev->timer);
/* report disconnect; the driver is already quiesced */
if (driver)
driver->disconnect(&dev->gadget);
/* re-init driver-visible data structures */
udc_reinit(dev);
}
static int pxa25x_stop(struct usb_gadget_driver *driver)
static int pxa25x_udc_stop(struct usb_gadget*g,
struct usb_gadget_driver *driver)
{
struct pxa25x_udc *dev = the_controller;
if (!dev)
return -ENODEV;
if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
struct pxa25x_udc *dev = to_pxa25x(g);
local_irq_disable();
dev->pullup = 0;
......@@ -1360,14 +1328,12 @@ static int pxa25x_stop(struct usb_gadget_driver *driver)
if (!IS_ERR_OR_NULL(dev->transceiver))
(void) otg_set_peripheral(dev->transceiver->otg, NULL);
driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
device_del (&dev->gadget.dev);
DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
dump_state(dev);
return 0;
}
......
......@@ -126,6 +126,7 @@ struct pxa25x_udc {
struct dentry *debugfs_udc;
#endif
};
#define to_pxa25x(g) (container_of((g), struct pxa25x_udc, gadget))
/*-------------------------------------------------------------------------*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment