Commit 61aaf9e8 authored by Emil Tantilov's avatar Emil Tantilov Committed by Jeff Kirsher

ixgbe: add 1Gbps support for QSFP+

This patch adds GB speed support for QSFP+ modules.
Autonegotiation is not supported with QSFP+. The user will have to set
the desired speed on both link partners using ethtool advertise setting.
Signed-off-by: default avatarEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 31c7d2b0
...@@ -379,8 +379,13 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, ...@@ -379,8 +379,13 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
if (hw->phy.multispeed_fiber) { if (hw->phy.multispeed_fiber) {
*speed |= IXGBE_LINK_SPEED_10GB_FULL | *speed |= IXGBE_LINK_SPEED_10GB_FULL |
IXGBE_LINK_SPEED_1GB_FULL; IXGBE_LINK_SPEED_1GB_FULL;
*autoneg = true;
/* QSFP must not enable auto-negotiation */
if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
*autoneg = false;
else
*autoneg = true;
} }
out: out:
...@@ -700,13 +705,18 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ...@@ -700,13 +705,18 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
goto out; goto out;
/* Set the module link speed */ /* Set the module link speed */
if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { switch (hw->phy.media_type) {
ixgbe_set_fiber_fixed_speed(hw, case ixgbe_media_type_fiber:
IXGBE_LINK_SPEED_10GB_FULL);
} else {
esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw); IXGBE_WRITE_FLUSH(hw);
break;
case ixgbe_media_type_fiber_qsfp:
/* QSFP module automatically detects MAC link speed */
break;
default:
hw_dbg(hw, "Unexpected media type.\n");
break;
} }
/* Allow module to change analog characteristics (1G->10G) */ /* Allow module to change analog characteristics (1G->10G) */
...@@ -757,14 +767,23 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ...@@ -757,14 +767,23 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
goto out; goto out;
/* Set the module link speed */ /* Set the module link speed */
if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { switch (hw->phy.media_type) {
case ixgbe_media_type_fiber_fixed:
ixgbe_set_fiber_fixed_speed(hw, ixgbe_set_fiber_fixed_speed(hw,
IXGBE_LINK_SPEED_1GB_FULL); IXGBE_LINK_SPEED_1GB_FULL);
} else { break;
case ixgbe_media_type_fiber:
esdp_reg &= ~IXGBE_ESDP_SDP5; esdp_reg &= ~IXGBE_ESDP_SDP5;
esdp_reg |= IXGBE_ESDP_SDP5_DIR; esdp_reg |= IXGBE_ESDP_SDP5_DIR;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw); IXGBE_WRITE_FLUSH(hw);
break;
case ixgbe_media_type_fiber_qsfp:
/* QSFP module automatically detects MAC link speed */
break;
default:
hw_dbg(hw, "Unexpected media type.\n");
break;
} }
/* Allow module to change analog characteristics (10G->1G) */ /* Allow module to change analog characteristics (10G->1G) */
......
...@@ -311,9 +311,6 @@ static int ixgbe_set_settings(struct net_device *netdev, ...@@ -311,9 +311,6 @@ static int ixgbe_set_settings(struct net_device *netdev,
* this function does not support duplex forcing, but can * this function does not support duplex forcing, but can
* limit the advertising of the adapter to the specified speed * limit the advertising of the adapter to the specified speed
*/ */
if (ecmd->autoneg == AUTONEG_DISABLE)
return -EINVAL;
if (ecmd->advertising & ~ecmd->supported) if (ecmd->advertising & ~ecmd->supported)
return -EINVAL; return -EINVAL;
......
...@@ -1205,6 +1205,12 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) ...@@ -1205,6 +1205,12 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
if (status != 0) if (status != 0)
goto err_read_i2c_eeprom; goto err_read_i2c_eeprom;
status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
&comp_codes_1g);
if (status != 0)
goto err_read_i2c_eeprom;
if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) { if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
hw->phy.type = ixgbe_phy_qsfp_passive_unknown; hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
if (hw->bus.lan_id == 0) if (hw->bus.lan_id == 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment