Commit 61e1b269 authored by Joe Carnuccio's avatar Joe Carnuccio Committed by James Bottomley

[SCSI] qla2xxx: Do link initialization on get loop id failure.

To avoid continually doing ISP resets when get loop id fails to
obtain the adapter loop id, first try to do a link initialization.
Signed-off-by: default avatarJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: default avatarSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent e9454a88
......@@ -12,7 +12,7 @@
* | Level | Last Value Used | Holes |
* ----------------------------------------------------------------------
* | Module Init and Probe | 0x0126 | 0x4b,0xba,0xfa |
* | Mailbox commands | 0x1150 | 0x111a-0x111b |
* | Mailbox commands | 0x1154 | 0x111a-0x111b |
* | | | 0x112c-0x112e |
* | | | 0x113a |
* | Device Discovery | 0x2087 | 0x2020-0x2022, |
......
......@@ -814,6 +814,7 @@ typedef struct {
#define MBC_HOST_MEMORY_COPY 0x53 /* Host Memory Copy. */
#define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */
#define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */
#define MBC_LINK_INITIALIZATION 0x72 /* Do link initialization. */
#define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */
#define MBC_PORT_RESET 0x120 /* Port Reset */
#define MBC_SET_PORT_CONFIG 0x122 /* Set port configuration */
......
......@@ -281,6 +281,9 @@ qla2x00_get_firmware_state(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_get_port_name(scsi_qla_host_t *, uint16_t, uint8_t *, uint8_t);
extern int
qla24xx_link_initialize(scsi_qla_host_t *);
extern int
qla2x00_lip_reset(scsi_qla_host_t *);
......
......@@ -2207,6 +2207,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
char connect_type[22];
struct qla_hw_data *ha = vha->hw;
unsigned long flags;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
/* Get host addresses. */
rval = qla2x00_get_adapter_id(vha,
......@@ -2220,6 +2221,13 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
} else {
ql_log(ql_log_warn, vha, 0x2009,
"Unable to get host loop ID.\n");
if (IS_FWI2_CAPABLE(ha) && (vha == base_vha) &&
(rval == QLA_COMMAND_ERROR && loop_id == 0x1b)) {
ql_log(ql_log_warn, vha, 0x1151,
"Doing link init.\n");
if (qla24xx_link_initialize(vha) == QLA_SUCCESS)
return rval;
}
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
return (rval);
......
......@@ -1632,6 +1632,54 @@ qla2x00_get_port_name(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t *name,
return rval;
}
/*
* qla24xx_link_initialization
* Issue link initialization mailbox command.
*
* Input:
* ha = adapter block pointer.
* TARGET_QUEUE_LOCK must be released.
* ADAPTER_STATE_LOCK must be released.
*
* Returns:
* qla2x00 local function return status code.
*
* Context:
* Kernel context.
*/
int
qla24xx_link_initialize(scsi_qla_host_t *vha)
{
int rval;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1152,
"Entered %s.\n", __func__);
if (!IS_FWI2_CAPABLE(vha->hw) || IS_CNA_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
mcp->mb[0] = MBC_LINK_INITIALIZATION;
mcp->mb[1] = BIT_6|BIT_4;
mcp->mb[2] = 0;
mcp->mb[3] = 0;
mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
mcp->in_mb = MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x1153, "Failed=%x.\n", rval);
} else {
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1154,
"Done %s.\n", __func__);
}
return rval;
}
/*
* qla2x00_lip_reset
* Issue LIP reset mailbox command.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment