Commit 623910f4 authored by Lars Povlsen's avatar Lars Povlsen Committed by Arnd Bergmann

arm64: dts: sparx5: Add i2c devices, i2c muxes

This patch adds i2c devices and muxes to the Sparx5 reference boards.

Link: https://lore.kernel.org/r/20200615133242.24911-11-lars.povlsen@microchip.comReviewed-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: default avatarLars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent e4e06a50
......@@ -170,6 +170,44 @@ uart2_pins: uart2-pins {
pins = "GPIO_26", "GPIO_27";
function = "uart2";
};
i2c_pins: i2c-pins {
pins = "GPIO_14", "GPIO_15";
function = "twi";
};
i2c2_pins: i2c2-pins {
pins = "GPIO_28", "GPIO_29";
function = "twi2";
};
};
i2c0: i2c@600101000 {
compatible = "snps,designware-i2c";
status = "disabled";
pinctrl-0 = <&i2c_pins>;
pinctrl-names = "default";
reg = <0x6 0x00101000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
i2c-sda-hold-time-ns = <300>;
clock-frequency = <100000>;
clocks = <&ahb_clk>;
};
i2c1: i2c@600103000 {
compatible = "snps,designware-i2c";
status = "disabled";
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
reg = <0x6 0x00103000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
i2c-sda-hold-time-ns = <300>;
clock-frequency = <100000>;
clocks = <&ahb_clk>;
};
};
};
......@@ -15,3 +15,7 @@ memory@0 {
reg = <0x00000000 0x00000000 0x10000000>;
};
};
&i2c1 {
status = "okay";
};
......@@ -7,9 +7,246 @@
#include "sparx5_pcb_common.dtsi"
/{
aliases {
i2c0 = &i2c0;
i2c100 = &i2c100;
i2c101 = &i2c101;
i2c102 = &i2c102;
i2c103 = &i2c103;
i2c104 = &i2c104;
i2c105 = &i2c105;
i2c106 = &i2c106;
i2c107 = &i2c107;
i2c108 = &i2c108;
i2c109 = &i2c109;
i2c110 = &i2c110;
i2c111 = &i2c111;
i2c112 = &i2c112;
i2c113 = &i2c113;
i2c114 = &i2c114;
i2c115 = &i2c115;
i2c116 = &i2c116;
i2c117 = &i2c117;
i2c118 = &i2c118;
i2c119 = &i2c119;
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
priority = <200>;
};
};
&gpio {
i2cmux_pins_i: i2cmux-pins-i {
pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
"GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
"GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
function = "twi_scl_m";
output-low;
};
i2cmux_0: i2cmux-0 {
pins = "GPIO_16";
function = "twi_scl_m";
output-high;
};
i2cmux_1: i2cmux-1 {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
i2cmux_2: i2cmux-2 {
pins = "GPIO_18";
function = "twi_scl_m";
output-high;
};
i2cmux_3: i2cmux-3 {
pins = "GPIO_19";
function = "twi_scl_m";
output-high;
};
i2cmux_4: i2cmux-4 {
pins = "GPIO_20";
function = "twi_scl_m";
output-high;
};
i2cmux_5: i2cmux-5 {
pins = "GPIO_22";
function = "twi_scl_m";
output-high;
};
i2cmux_6: i2cmux-6 {
pins = "GPIO_36";
function = "twi_scl_m";
output-high;
};
i2cmux_7: i2cmux-7 {
pins = "GPIO_35";
function = "twi_scl_m";
output-high;
};
i2cmux_8: i2cmux-8 {
pins = "GPIO_50";
function = "twi_scl_m";
output-high;
};
i2cmux_9: i2cmux-9 {
pins = "GPIO_51";
function = "twi_scl_m";
output-high;
};
i2cmux_10: i2cmux-10 {
pins = "GPIO_56";
function = "twi_scl_m";
output-high;
};
i2cmux_11: i2cmux-11 {
pins = "GPIO_57";
function = "twi_scl_m";
output-high;
};
};
&axi {
i2c0_imux: i2c0-imux@0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
i2c0_emux: i2c0-emux@0 {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
};
&i2c0_imux {
pinctrl-names =
"i2c100", "i2c101", "i2c102", "i2c103",
"i2c104", "i2c105", "i2c106", "i2c107",
"i2c108", "i2c109", "i2c110", "i2c111", "idle";
pinctrl-0 = <&i2cmux_0>;
pinctrl-1 = <&i2cmux_1>;
pinctrl-2 = <&i2cmux_2>;
pinctrl-3 = <&i2cmux_3>;
pinctrl-4 = <&i2cmux_4>;
pinctrl-5 = <&i2cmux_5>;
pinctrl-6 = <&i2cmux_6>;
pinctrl-7 = <&i2cmux_7>;
pinctrl-8 = <&i2cmux_8>;
pinctrl-9 = <&i2cmux_9>;
pinctrl-10 = <&i2cmux_10>;
pinctrl-11 = <&i2cmux_11>;
pinctrl-12 = <&i2cmux_pins_i>;
i2c100: i2c_sfp1 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c101: i2c_sfp2 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c102: i2c_sfp3 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c103: i2c_sfp4 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c104: i2c_sfp5 {
reg = <0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c105: i2c_sfp6 {
reg = <0x5>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c106: i2c_sfp7 {
reg = <0x6>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c107: i2c_sfp8 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c108: i2c_sfp9 {
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c109: i2c_sfp10 {
reg = <0x9>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c110: i2c_sfp11 {
reg = <0xa>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c111: i2c_sfp12 {
reg = <0xb>;
#address-cells = <1>;
#size-cells = <0>;
};
};
&i2c0_emux {
mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH
&gpio 60 GPIO_ACTIVE_HIGH
&gpio 61 GPIO_ACTIVE_HIGH
&gpio 54 GPIO_ACTIVE_HIGH>;
idle-state = <0x8>;
i2c112: i2c_sfp13 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c113: i2c_sfp14 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c114: i2c_sfp15 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c115: i2c_sfp16 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c116: i2c_sfp17 {
reg = <0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c117: i2c_sfp18 {
reg = <0x5>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c118: i2c_sfp19 {
reg = <0x6>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c119: i2c_sfp20 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
};
};
......@@ -7,9 +7,86 @@
#include "sparx5_pcb_common.dtsi"
/{
aliases {
i2c0 = &i2c0;
i2c152 = &i2c152;
i2c153 = &i2c153;
i2c154 = &i2c154;
i2c155 = &i2c155;
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
priority = <200>;
};
};
&gpio {
i2cmux_pins_i: i2cmux-pins-i {
pins = "GPIO_35", "GPIO_36",
"GPIO_50", "GPIO_51";
function = "twi_scl_m";
output-low;
};
i2cmux_s29: i2cmux-0 {
pins = "GPIO_35";
function = "twi_scl_m";
output-high;
};
i2cmux_s30: i2cmux-1 {
pins = "GPIO_36";
function = "twi_scl_m";
output-high;
};
i2cmux_s31: i2cmux-2 {
pins = "GPIO_50";
function = "twi_scl_m";
output-high;
};
i2cmux_s32: i2cmux-3 {
pins = "GPIO_51";
function = "twi_scl_m";
output-high;
};
};
&axi {
i2c0_imux: i2c0-imux@0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
};
&i2c0_imux {
pinctrl-names =
"i2c152", "i2c153", "i2c154", "i2c155",
"idle";
pinctrl-0 = <&i2cmux_s29>;
pinctrl-1 = <&i2cmux_s30>;
pinctrl-2 = <&i2cmux_s31>;
pinctrl-3 = <&i2cmux_s32>;
pinctrl-4 = <&i2cmux_pins_i>;
i2c152: i2c_sfp1 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c153: i2c_sfp2 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c154: i2c_sfp3 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c155: i2c_sfp4 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
......@@ -13,3 +13,7 @@ &uart0 {
&uart1 {
status = "okay";
};
&i2c0 {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment