m68k: apollo, q40, sun3, sun3x: Remove arch_gettimeoffset implementations

These dummy implementations are no better than
default_arch_gettimeoffset() so remove them.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

arch/m68k/apollo/config.c

@@ -29,7 +29,6 @@ u_long apollo_model;
 
 extern void dn_sched_init(irq_handler_t handler);
 extern void dn_init_IRQ(void);
-extern u32 dn_gettimeoffset(void);
 extern int dn_dummy_hwclk(int, struct rtc_time *);
 extern void dn_dummy_reset(void);
 #ifdef CONFIG_HEARTBEAT
@@ -152,7 +151,6 @@ void __init config_apollo(void)
 
 	mach_sched_init=dn_sched_init; /* */
 	mach_init_IRQ=dn_init_IRQ;
-	arch_gettimeoffset   = dn_gettimeoffset;
 	mach_max_dma_address = 0xffffffff;
 	mach_hwclk           = dn_dummy_hwclk; /* */
 	mach_reset	     = dn_dummy_reset;  /* */
@@ -205,11 +203,6 @@ void dn_sched_init(irq_handler_t timer_routine)
 		pr_err("Couldn't register timer interrupt\n");
 }
 
-u32 dn_gettimeoffset(void)
-{
-	return 0xdeadbeef;
-}
-
 int dn_dummy_hwclk(int op, struct rtc_time *t) {
 
 

arch/m68k/q40/config.c

@@ -40,7 +40,6 @@ extern void q40_init_IRQ(void);
 static void q40_get_model(char *model);
 extern void q40_sched_init(irq_handler_t handler);
 
-static u32 q40_gettimeoffset(void);
 static int q40_hwclk(int, struct rtc_time *);
 static unsigned int q40_get_ss(void);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
@@ -169,7 +168,6 @@ void __init config_q40(void)
 	mach_sched_init = q40_sched_init;
 
 	mach_init_IRQ = q40_init_IRQ;
-	arch_gettimeoffset = q40_gettimeoffset;
 	mach_hwclk = q40_hwclk;
 	mach_get_ss = q40_get_ss;
 	mach_get_rtc_pll = q40_get_rtc_pll;
@@ -201,13 +199,6 @@ int __init q40_parse_bootinfo(const struct bi_record *rec)
 	return 1;
 }
 
-
-static u32 q40_gettimeoffset(void)
-{
-	return 5000 * (ql_ticks != 0) * 1000;
-}
-
-
 /*
  * Looks like op is non-zero for setting the clock, and zero for
  * reading the clock.

arch/m68k/sun3/config.c

@@ -37,7 +37,6 @@
 
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
-extern u32 sun3_gettimeoffset(void);
 static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
 extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -138,7 +137,6 @@ void __init config_sun3(void)
         mach_sched_init      =  sun3_sched_init;
         mach_init_IRQ        =  sun3_init_IRQ;
         mach_reset           =  sun3_reboot;
-	arch_gettimeoffset   =  sun3_gettimeoffset;
 	mach_get_model	     =  sun3_get_model;
 	mach_hwclk           =  sun3_hwclk;
 	mach_halt	     =  sun3_halt;

arch/m68k/sun3/intersil.c

@@ -22,13 +22,6 @@
 #define STOP_VAL (INTERSIL_STOP | INTERSIL_INT_ENABLE | INTERSIL_24H_MODE)
 #define START_VAL (INTERSIL_RUN | INTERSIL_INT_ENABLE | INTERSIL_24H_MODE)
 
-/* does this need to be implemented? */
-u32 sun3_gettimeoffset(void)
-{
-  return 1000;
-}
-
-
 /* get/set hwclock */
 
 int sun3_hwclk(int set, struct rtc_time *t)

arch/m68k/sun3x/config.c

@@ -49,7 +49,6 @@ void __init config_sun3x(void)
 	mach_sched_init      = sun3x_sched_init;
 	mach_init_IRQ        = sun3_init_IRQ;
 
-	arch_gettimeoffset   = sun3x_gettimeoffset;
 	mach_reset           = sun3x_reboot;
 
 	mach_hwclk           = sun3x_hwclk;

arch/m68k/sun3x/time.c

@@ -73,11 +73,6 @@ int sun3x_hwclk(int set, struct rtc_time *t)
 
 	return 0;
 }
-/* Not much we can do here */
-u32 sun3x_gettimeoffset(void)
-{
-    return 0L;
-}
 
 #if 0
 static irqreturn_t sun3x_timer_tick(int irq, void *dev_id)

arch/m68k/sun3x/time.h

@@ -3,7 +3,6 @@
 #define SUN3X_TIME_H
 
 extern int sun3x_hwclk(int set, struct rtc_time *t);
-u32 sun3x_gettimeoffset(void);
 void sun3x_sched_init(irq_handler_t vector);
 
 struct mostek_dt {