Merge remote-tracking branch 'media_tree/vsp1' into generic-zpos-v8

Documentation/DocBook/media/v4l/media-types.xml

@@ -121,6 +121,70 @@
 	    <entry><constant>MEDIA_ENT_F_AUDIO_MIXER</constant></entry>
 	    <entry>Audio Mixer Function Entity.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_PROC_VIDEO_COMPOSER</constant></entry>
+	    <entry>Video composer (blender). An entity capable of video
+		   composing must have at least two sink pads and one source
+		   pad, and composes input video frames onto output video
+		   frames. Composition can be performed using alpha blending,
+		   color keying, raster operations (ROP), stitching or any other
+		   means.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER</constant></entry>
+	    <entry>Video pixel formatter. An entity capable of pixel formatting
+		   must have at least one sink pad and one source pad. Read
+		   pixel formatters read pixels from memory and perform a subset
+		   of unpacking, cropping, color keying, alpha multiplication
+		   and pixel encoding conversion. Write pixel formatters perform
+		   a subset of dithering, pixel encoding conversion and packing
+		   and write pixels to memory.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV</constant></entry>
+	    <entry>Video pixel encoding converter. An entity capable of pixel
+		   enconding conversion must have at least one sink pad and one
+		   source pad, and convert the encoding of pixels received on
+		   its sink pad(s) to a different encoding output on its source
+		   pad(s). Pixel encoding conversion includes but isn't limited
+		   to RGB to/from HSV, RGB to/from YUV and CFA (Bayer) to RGB
+		   conversions.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_PROC_VIDEO_LUT</constant></entry>
+	    <entry>Video look-up table. An entity capable of video lookup table
+		   processing must have one sink pad and one source pad. It uses
+		   the values of the pixels received on its sink pad to look up
+		   entries in internal tables and output them on its source pad.
+		   The lookup processing can be performed on all components
+		   separately or combine them for multi-dimensional table
+		   lookups.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_PROC_VIDEO_SCALER</constant></entry>
+	    <entry>Video scaler. An entity capable of video scaling must have
+		   at least one sink pad and one source pad, and scale the
+		   video frame(s) received on its sink pad(s) to a different
+		   resolution output on its source pad(s). The range of
+		   supported scaling ratios is entity-specific and can differ
+		   between the horizontal and vertical directions (in particular
+		   scaling can be supported in one direction only). Binning and
+		   skipping are considered as scaling.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_PROC_VIDEO_STATISTICS</constant></entry>
+	    <entry>Video statistics computation (histogram, 3A, ...). An entity
+		   capable of statistics computation must have one sink pad and
+		   one source pad. It computes statistics over the frames
+		   received on its sink pad and outputs the statistics data on
+		   its source pad.
+	    </entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/devicetree/bindings/media/mediatek-vpu.txt

+* Mediatek Video Processor Unit
+
+Video Processor Unit is a HW video controller. It controls HW Codec including
+H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).
+
+Required properties:
+  - compatible: "mediatek,mt8173-vpu"
+  - reg: Must contain an entry for each entry in reg-names.
+  - reg-names: Must include the following entries:
+    "tcm": tcm base
+    "cfg_reg": Main configuration registers base
+  - interrupts: interrupt number to the cpu.
+  - clocks : clock name from clock manager
+  - clock-names: must be main. It is the main clock of VPU
+
+Optional properties:
+  - memory-region: phandle to a node describing memory (see
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+    to be used for VPU extended memory; if not present, VPU may be located
+    anywhere in the memory
+
+Example:
+	vpu: vpu@10020000 {
+		compatible = "mediatek,mt8173-vpu";
+		reg = <0 0x10020000 0 0x30000>,
+		      <0 0x10050000 0 0x100>;
+		reg-names = "tcm", "cfg_reg";
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&topckgen TOP_SCP_SEL>;
+		clock-names = "main";
+	};

Documentation/devicetree/bindings/media/renesas,fcp.txt

+Renesas R-Car Frame Compression Processor (FCP)
+-----------------------------------------------
+
+The FCP is a companion module of video processing modules in the Renesas R-Car
+Gen3 SoCs. It provides data compression and decompression, data caching, and
+conversion of AXI transactions in order to reduce the memory bandwidth.
+
+There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP
+for FDP (FCPF). Their configuration and behaviour depend on the module they
+are paired with. These DT bindings currently support the FCPV only.
+
+ - compatible: Must be one or more of the following
+
+   - "renesas,r8a7795-fcpv" for R8A7795 (R-Car H3) compatible 'FCP for VSP'
+   - "renesas,fcpv" for generic compatible 'FCP for VSP'
+
+   When compatible with the generic version, nodes must list the
+   SoC-specific version corresponding to the platform first, followed by the
+   family-specific and/or generic versions.
+
+ - reg: the register base and size for the device registers
+ - clocks: Reference to the functional clock
+
+
+Device node example
+-------------------
+
+	fcpvd1: fcp@fea2f000 {
+		compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+		reg = <0 0xfea2f000 0 0x200>;
+		clocks = <&cpg CPG_MOD 602>;
+	};

Documentation/devicetree/bindings/media/renesas,vsp1.txt

@@ -14,6 +14,11 @@ Required properties:
   - interrupts: VSP interrupt specifier.
   - clocks: A phandle + clock-specifier pair for the VSP functional clock.
 
+Optional properties:
+
+  - renesas,fcp: A phandle referencing the FCP that handles memory accesses
+                 for the VSP. Not needed on Gen2, mandatory on Gen3.
+
 
 Example: R8A7790 (R-Car H2) VSP1-S node
 

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -21,15 +21,18 @@ Required properties:
   - clock-names : from common clock binding: must contain "mfc",
 		  corresponding to entry in the clocks property.
 
-  - samsung,mfc-r : Base address of the first memory bank used by MFC
-		    for DMA contiguous memory allocation and its size.
-
-  - samsung,mfc-l : Base address of the second memory bank used by MFC
-		    for DMA contiguous memory allocation and its size.
-
 Optional properties:
   - power-domains : power-domain property defined with a phandle
 			   to respective power domain.
+  - memory-region : from reserved memory binding: phandles to two reserved
+	memory regions, first is for "left" mfc memory bus interfaces,
+	second if for the "right" mfc memory bus, used when no SYSMMU
+	support is available
+
+Obsolete properties:
+  - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region
+	property instead
+
 
 Example:
 SoC specific DT entry:
@@ -43,9 +46,29 @@ mfc: codec@13400000 {
 	clock-names = "mfc";
 };
 
+Reserved memory specific DT entry for given board (see reserved memory binding
+for more information):
+
+reserved-memory {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	mfc_left: region@51000000 {
+		compatible = "shared-dma-pool";
+		no-map;
+		reg = <0x51000000 0x800000>;
+	};
+
+	mfc_right: region@43000000 {
+		compatible = "shared-dma-pool";
+		no-map;
+		reg = <0x43000000 0x800000>;
+	};
+};
+
 Board specific DT entry:
 
 codec@13400000 {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
 };

MAINTAINERS

@@ -7357,6 +7357,16 @@ L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/iio/potentiometer/mcp4531.c
 
+MEDIA DRIVERS FOR RENESAS - FCP
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	linux-media@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Supported
+F:	Documentation/devicetree/bindings/media/renesas,fcp.txt
+F:	drivers/media/platform/rcar-fcp.c
+F:	include/media/rcar-fcp.h
+
 MEDIA DRIVERS FOR RENESAS - VSP1
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@@ -7366,8 +7376,18 @@ S:	Supported
 F:	Documentation/devicetree/bindings/media/renesas,vsp1.txt
 F:	drivers/media/platform/vsp1/
 
+MEDIA DRIVERS FOR HELENE
+M:	Abylay Ospan <aospan@netup.ru>
+L:	linux-media@vger.kernel.org
+W:	https://linuxtv.org
+W:	http://netup.tv/
+T:	git git://linuxtv.org/media_tree.git
+S:	Supported
+F:	drivers/media/dvb-frontends/helene*
+
 MEDIA DRIVERS FOR ASCOT2E
 M:	Sergey Kozlov <serjk@netup.ru>
+M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
 W:	https://linuxtv.org
 W:	http://netup.tv/
@@ -7377,6 +7397,7 @@ F:	drivers/media/dvb-frontends/ascot2e*
 
 MEDIA DRIVERS FOR CXD2841ER
 M:	Sergey Kozlov <serjk@netup.ru>
+M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
 W:	https://linuxtv.org
 W:	http://netup.tv/
@@ -7386,6 +7407,7 @@ F:	drivers/media/dvb-frontends/cxd2841er*
 
 MEDIA DRIVERS FOR HORUS3A
 M:	Sergey Kozlov <serjk@netup.ru>
+M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
 W:	https://linuxtv.org
 W:	http://netup.tv/
@@ -7395,6 +7417,7 @@ F:	drivers/media/dvb-frontends/horus3a*
 
 MEDIA DRIVERS FOR LNBH25
 M:	Sergey Kozlov <serjk@netup.ru>
+M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
 W:	https://linuxtv.org
 W:	http://netup.tv/
@@ -7404,6 +7427,7 @@ F:	drivers/media/dvb-frontends/lnbh25*
 
 MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
 M:	Sergey Kozlov <serjk@netup.ru>
+M:	Abylay Ospan <aospan@netup.ru>
 L:	linux-media@vger.kernel.org
 W:	https://linuxtv.org
 W:	http://netup.tv/
@@ -7653,10 +7677,8 @@ L:	linux-media@vger.kernel.org
 W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-T:	git git://linuxtv.org/anttip/media_tree.git
 S:	Maintained
-F:	drivers/staging/media/mn88472/
-F:	drivers/media/dvb-frontends/mn88472.h
+F:	drivers/media/dvb-frontends/mn88472*
 
 MN88473 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>

drivers/gpu/drm/rcar-du/rcar_du_vsp.c

@@ -148,40 +148,39 @@ static void rcar_du_vsp_plane_setup(struct rcar_du_vsp_plane *plane)
 	struct rcar_du_vsp_plane_state *state =
 		to_rcar_vsp_plane_state(plane->plane.state);
 	struct drm_framebuffer *fb = plane->plane.state->fb;
-	struct v4l2_rect src;
-	struct v4l2_rect dst;
-	dma_addr_t paddr[2] = { 0, };
-	u32 pixelformat = 0;
+	struct vsp1_du_atomic_config cfg = {
+		.pixelformat = 0,
+		.pitch = fb->pitches[0],
+		.alpha = state->alpha,
+		.zpos = state->zpos,
+	};
 	unsigned int i;
 
-	src.left = state->state.src_x >> 16;
-	src.top = state->state.src_y >> 16;
-	src.width = state->state.src_w >> 16;
-	src.height = state->state.src_h >> 16;
+	cfg.src.left = state->state.src_x >> 16;
+	cfg.src.top = state->state.src_y >> 16;
+	cfg.src.width = state->state.src_w >> 16;
+	cfg.src.height = state->state.src_h >> 16;
 
-	dst.left = state->state.crtc_x;
-	dst.top = state->state.crtc_y;
-	dst.width = state->state.crtc_w;
-	dst.height = state->state.crtc_h;
+	cfg.dst.left = state->state.crtc_x;
+	cfg.dst.top = state->state.crtc_y;
+	cfg.dst.width = state->state.crtc_w;
+	cfg.dst.height = state->state.crtc_h;
 
 	for (i = 0; i < state->format->planes; ++i) {
 		struct drm_gem_cma_object *gem;
 
 		gem = drm_fb_cma_get_gem_obj(fb, i);
-		paddr[i] = gem->paddr + fb->offsets[i];
+		cfg.mem[i] = gem->paddr + fb->offsets[i];
 	}
 
 	for (i = 0; i < ARRAY_SIZE(formats_kms); ++i) {
 		if (formats_kms[i] == state->format->fourcc) {
-			pixelformat = formats_v4l2[i];
+			cfg.pixelformat = formats_v4l2[i];
 			break;
 		}
 	}
 
-	WARN_ON(!pixelformat);
-
-	vsp1_du_atomic_update(plane->vsp->vsp, plane->index, pixelformat,
-			      fb->pitches[0], paddr, &src, &dst);
+	vsp1_du_atomic_update(plane->vsp->vsp, plane->index, &cfg);
 }
 
 static int rcar_du_vsp_plane_atomic_check(struct drm_plane *plane,
@@ -220,8 +219,7 @@ static void rcar_du_vsp_plane_atomic_update(struct drm_plane *plane,
 	if (plane->state->crtc)
 		rcar_du_vsp_plane_setup(rplane);
 	else
-		vsp1_du_atomic_update(rplane->vsp->vsp, rplane->index, 0, 0, 0,
-				      NULL, NULL);
+		vsp1_du_atomic_update(rplane->vsp->vsp, rplane->index, NULL);
 }
 
 static const struct drm_plane_helper_funcs rcar_du_vsp_plane_helper_funcs = {
@@ -269,6 +267,7 @@ static void rcar_du_vsp_plane_reset(struct drm_plane *plane)
 		return;
 
 	state->alpha = 255;
+	state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1;
 
 	plane->state = &state->state;
 	plane->state->plane = plane;
@@ -283,6 +282,8 @@ static int rcar_du_vsp_plane_atomic_set_property(struct drm_plane *plane,
 
 	if (property == rcdu->props.alpha)
 		rstate->alpha = val;
+	else if (property == rcdu->props.zpos)
+		rstate->zpos = val;
 	else
 		return -EINVAL;
 
@@ -299,6 +300,8 @@ static int rcar_du_vsp_plane_atomic_get_property(struct drm_plane *plane,
 
 	if (property == rcdu->props.alpha)
 		*val = rstate->alpha;
+	else if (property == rcdu->props.zpos)
+		*val = rstate->zpos;
 	else
 		return -EINVAL;
 
@@ -378,6 +381,8 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp)
 
 		drm_object_attach_property(&plane->plane.base,
 					   rcdu->props.alpha, 255);
+		drm_object_attach_property(&plane->plane.base,
+					   rcdu->props.zpos, 1);
 	}
 
 	return 0;

drivers/gpu/drm/rcar-du/rcar_du_vsp.h

@@ -44,6 +44,7 @@ static inline struct rcar_du_vsp_plane *to_rcar_vsp_plane(struct drm_plane *p)
  * @state: base DRM plane state
  * @format: information about the pixel format used by the plane
  * @alpha: value of the plane alpha property
+ * @zpos: value of the plane zpos property
  */
 struct rcar_du_vsp_plane_state {
 	struct drm_plane_state state;
@@ -51,6 +52,7 @@ struct rcar_du_vsp_plane_state {
 	const struct rcar_du_format_info *format;
 
 	unsigned int alpha;
+	unsigned int zpos;
 };
 
 static inline struct rcar_du_vsp_plane_state *

drivers/media/dvb-core/dvb_ca_en50221.c

@@ -161,6 +161,18 @@ struct dvb_ca_private {
 	struct mutex ioctl_mutex;
 };
 
+static void dvb_ca_private_free(struct dvb_ca_private *ca)
+{
+	unsigned int i;
+
+	dvb_unregister_device(ca->dvbdev);
+	for (i = 0; i < ca->slot_count; i++)
+		vfree(ca->slot_info[i].rx_buffer.data);
+
+	kfree(ca->slot_info);
+	kfree(ca);
+}
+
 static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca);
 static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
@@ -1759,10 +1771,7 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
 
 	for (i = 0; i < ca->slot_count; i++) {
 		dvb_ca_en50221_slot_shutdown(ca, i);
-		vfree(ca->slot_info[i].rx_buffer.data);
 	}
-	kfree(ca->slot_info);
-	dvb_unregister_device(ca->dvbdev);
-	kfree(ca);
+	dvb_ca_private_free(ca);
 	pubca->private = NULL;
 }

drivers/media/dvb-frontends/Kconfig

@@ -73,6 +73,14 @@ config DVB_SI2165
 
 	  Say Y when you want to support this frontend.
 
+config DVB_MN88472
+	tristate "Panasonic MN88472"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
 config DVB_MN88473
 	tristate "Panasonic MN88473"
 	depends on DVB_CORE && I2C
@@ -853,6 +861,13 @@ config DVB_ASCOT2E
 	help
 	  Say Y when you want to support this frontend.
 
+config DVB_HELENE
+	tristate "Sony HELENE Sat/Ter tuner (CXD2858ER)"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	Say Y when you want to support this frontend.
+
 comment "Tools to develop new frontends"
 
 config DVB_DUMMY_FE

drivers/media/dvb-frontends/Makefile

@@ -95,6 +95,7 @@ obj-$(CONFIG_DVB_STV0900) += stv0900.o
 obj-$(CONFIG_DVB_STV090x) += stv090x.o
 obj-$(CONFIG_DVB_STV6110x) += stv6110x.o
 obj-$(CONFIG_DVB_M88DS3103) += m88ds3103.o
+obj-$(CONFIG_DVB_MN88472) += mn88472.o
 obj-$(CONFIG_DVB_MN88473) += mn88473.o
 obj-$(CONFIG_DVB_ISL6423) += isl6423.o
 obj-$(CONFIG_DVB_EC100) += ec100.o
@@ -123,3 +124,4 @@ obj-$(CONFIG_DVB_AS102_FE) += as102_fe.o
 obj-$(CONFIG_DVB_TC90522) += tc90522.o
 obj-$(CONFIG_DVB_HORUS3A) += horus3a.o
 obj-$(CONFIG_DVB_ASCOT2E) += ascot2e.o
+obj-$(CONFIG_DVB_HELENE) += helene.o

drivers/media/dvb-frontends/cxd2841er.h

@@ -25,41 +25,39 @@
 #include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
+enum cxd2841er_xtal {
+	SONY_XTAL_20500, /* 20.5 MHz */
+	SONY_XTAL_24000, /* 24 MHz */
+	SONY_XTAL_41000 /* 41 MHz */
+};
+
 struct cxd2841er_config {
 	u8	i2c_addr;
+	enum cxd2841er_xtal	xtal;
 };
 
 #if IS_REACHABLE(CONFIG_DVB_CXD2841ER)
 extern struct dvb_frontend *cxd2841er_attach_s(struct cxd2841er_config *cfg,
 					       struct i2c_adapter *i2c);
 
-extern struct dvb_frontend *cxd2841er_attach_t(struct cxd2841er_config *cfg,
-					       struct i2c_adapter *i2c);
-
-extern struct dvb_frontend *cxd2841er_attach_c(struct cxd2841er_config *cfg,
+extern struct dvb_frontend *cxd2841er_attach_t_c(struct cxd2841er_config *cfg,
 					       struct i2c_adapter *i2c);
 #else
 static inline struct dvb_frontend *cxd2841er_attach_s(
 					struct cxd2841er_config *cfg,
 					struct i2c_adapter *i2c)
 {
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
 
-static inline struct dvb_frontend *cxd2841er_attach_t(
+static inline struct dvb_frontend *cxd2841er_attach_t_c(
 		struct cxd2841er_config *cfg, struct i2c_adapter *i2c)
 {
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
 
-static inline struct dvb_frontend *cxd2841er_attach_c(
-		struct cxd2841er_config *cfg, struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
 #endif
 
 #endif

drivers/media/dvb-frontends/cxd2841er_priv.h

@@ -26,6 +26,7 @@
 #define I2C_SLVT			1
 
 #define CXD2841ER_CHIP_ID		0xa7
+#define CXD2854ER_CHIP_ID		0xc1
 
 #define CXD2841ER_DVBS_POLLING_INVL	10
 

drivers/media/dvb-frontends/ds3000.c

@@ -959,6 +959,15 @@ static int ds3000_set_frontend(struct dvb_frontend *fe)
 	/* enable ac coupling */
 	ds3000_writereg(state, 0x25, 0x8a);
 
+	if ((c->symbol_rate < ds3000_ops.info.symbol_rate_min) ||
+			(c->symbol_rate > ds3000_ops.info.symbol_rate_max)) {
+		dprintk("%s() symbol_rate %u out of range (%u ... %u)\n",
+				__func__, c->symbol_rate,
+				ds3000_ops.info.symbol_rate_min,
+				ds3000_ops.info.symbol_rate_max);
+		return -EINVAL;
+	}
+
 	/* enhance symbol rate performance */
 	if ((c->symbol_rate / 1000) <= 5000) {
 		value = 29777 / (c->symbol_rate / 1000) + 1;

drivers/media/dvb-frontends/helene.h

+/*
+ * helene.h
+ *
+ * Sony HELENE DVB-S/S2/T/T2/C/C2/ISDB-T/S tuner driver (CXD2858ER)
+ *
+ * Copyright 2012 Sony Corporation
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+  */
+
+#ifndef __DVB_HELENE_H__
+#define __DVB_HELENE_H__
+
+#include <linux/kconfig.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+enum helene_xtal {
+	SONY_HELENE_XTAL_16000, /* 16 MHz */
+	SONY_HELENE_XTAL_20500, /* 20.5 MHz */
+	SONY_HELENE_XTAL_24000, /* 24 MHz */
+	SONY_HELENE_XTAL_41000 /* 41 MHz */
+};
+
+/**
+ * struct helene_config - the configuration of 'Helene' tuner driver
+ * @i2c_address:	I2C address of the tuner
+ * @xtal_freq_mhz:	Oscillator frequency, MHz
+ * @set_tuner_priv:	Callback function private context
+ * @set_tuner_callback:	Callback function that notifies the parent driver
+ *			which tuner is active now
+ */
+struct helene_config {
+	u8	i2c_address;
+	u8	xtal_freq_mhz;
+	void	*set_tuner_priv;
+	int	(*set_tuner_callback)(void *, int);
+	enum helene_xtal xtal;
+};
+
+#if IS_REACHABLE(CONFIG_DVB_HELENE)
+extern struct dvb_frontend *helene_attach(struct dvb_frontend *fe,
+					const struct helene_config *config,
+					struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *helene_attach(struct dvb_frontend *fe,
+					const struct helene_config *config,
+					struct i2c_adapter *i2c)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#if IS_REACHABLE(CONFIG_DVB_HELENE)
+extern struct dvb_frontend *helene_attach_s(struct dvb_frontend *fe,
+					const struct helene_config *config,
+					struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *helene_attach_s(struct dvb_frontend *fe,
+					const struct helene_config *config,
+					struct i2c_adapter *i2c)
+{
+	pr_warn("%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif

drivers/media/dvb-frontends/horus3a.c

@@ -66,7 +66,7 @@ static int horus3a_write_regs(struct horus3a_priv *priv,
 		}
 	};
 
-	if (len + 1 >= sizeof(buf)) {
+	if (len + 1 > sizeof(buf)) {
 		dev_warn(&priv->i2c->dev,"wr reg=%04x: len=%d is too big!\n",
 			 reg, len + 1);
 		return -E2BIG;
@@ -272,24 +272,6 @@ static int horus3a_set_params(struct dvb_frontend *fe)
 		if (fc_lpf > 36)
 			fc_lpf = 36;
 	} else if (p->delivery_system == SYS_DVBS2) {
-		int rolloff;
-
-		switch (p->rolloff) {
-		case ROLLOFF_35:
-			rolloff = 35;
-			break;
-		case ROLLOFF_25:
-			rolloff = 25;
-			break;
-		case ROLLOFF_20:
-			rolloff = 20;
-			break;
-		case ROLLOFF_AUTO:
-		default:
-			dev_err(&priv->i2c->dev,
-				"horus3a: auto roll-off is not supported\n");
-			return -EINVAL;
-		}
 		/*
 		 * SR <= 4.5:
 		 * fc_lpf = 5
@@ -302,11 +284,9 @@ static int horus3a_set_params(struct dvb_frontend *fe)
 		if (symbol_rate <= 4500)
 			fc_lpf = 5;
 		else if (symbol_rate <= 10000)
-			fc_lpf = (u8)DIV_ROUND_UP(
-				symbol_rate * (200 + rolloff), 200000);
+			fc_lpf = (u8)((symbol_rate * 11 + (10000-1)) / 10000);
 		else
-			fc_lpf = (u8)DIV_ROUND_UP(
-				symbol_rate * (100 + rolloff), 200000) + 5;
+			fc_lpf = (u8)((symbol_rate * 3 + (5000-1)) / 5000 + 5);
 		/* 5 <= fc_lpf <= 36 is valid */
 		if (fc_lpf > 36)
 			fc_lpf = 36;

drivers/media/dvb-frontends/m88rs2000.c

@@ -609,7 +609,7 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe)
 {
 	struct m88rs2000_state *state = fe->demodulator_priv;
 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	enum fe_status status;
+	enum fe_status status = 0;
 	int i, ret = 0;
 	u32 tuner_freq;
 	s16 offset = 0;

drivers/media/dvb-frontends/mn88472.h

@@ -19,23 +19,33 @@
 
 #include <linux/dvb/frontend.h>
 
-enum ts_clock {
-	VARIABLE_TS_CLOCK,
-	FIXED_TS_CLOCK,
-};
+/**
+ * struct mn88472_config - Platform data for the mn88472 driver
+ * @xtal: Clock frequency.
+ * @ts_mode: TS mode.
+ * @ts_clock: TS clock config.
+ * @i2c_wr_max: Max number of bytes driver writes to I2C at once.
+ * @get_dvb_frontend: Get DVB frontend.
+ */
 
-enum ts_mode {
-	SERIAL_TS_MODE,
-	PARALLEL_TS_MODE,
-};
+/* Define old names for backward compatibility */
+#define VARIABLE_TS_CLOCK   MN88472_TS_CLK_VARIABLE
+#define FIXED_TS_CLOCK      MN88472_TS_CLK_FIXED
+#define SERIAL_TS_MODE      MN88472_TS_MODE_SERIAL
+#define PARALLEL_TS_MODE    MN88472_TS_MODE_PARALLEL
 
 struct mn88472_config {
-	/*
-	 * Max num of bytes given I2C adapter could write at once.
-	 * Default: none
-	 */
-	u16 i2c_wr_max;
+	unsigned int xtal;
+
+#define MN88472_TS_MODE_SERIAL      0
+#define MN88472_TS_MODE_PARALLEL    1
+	int ts_mode;
 
+#define MN88472_TS_CLK_FIXED        0
+#define MN88472_TS_CLK_VARIABLE     1
+	int ts_clock;
+
+	u16 i2c_wr_max;
 
 	/* Everything after that is returned by the driver. */
 
@@ -43,14 +53,7 @@ struct mn88472_config {
 	 * DVB frontend.
 	 */
 	struct dvb_frontend **fe;
-
-	/*
-	 * Xtal frequency.
-	 * Hz
-	 */
-	u32 xtal;
-	int ts_mode;
-	int ts_clock;
+	struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
 };
 
 #endif

drivers/staging/media/mn88472/mn88472_priv.h → drivers/media/dvb-frontends/mn88472_priv.h

@@ -28,12 +28,11 @@ struct mn88472_dev {
 	struct i2c_client *client[3];
 	struct regmap *regmap[3];
 	struct dvb_frontend fe;
-	u16 i2c_wr_max;
-	enum fe_delivery_system delivery_system;
-	bool warm; /* FW running */
-	u32 xtal;
-	int ts_mode;
-	int ts_clock;
+	u16 i2c_write_max;
+	unsigned int clk;
+	unsigned int active:1;
+	unsigned int ts_mode:1;
+	unsigned int ts_clk:1;
 };
 
 #endif

drivers/media/dvb-frontends/mn88473.c

@@ -330,7 +330,7 @@ static int mn88473_init(struct dvb_frontend *fe)
 	/* Request the firmware, this will block and timeout */
 	ret = request_firmware(&fw, name, &client->dev);
 	if (ret) {
-		dev_err(&client->dev, "firmare file '%s' not found\n", name);
+		dev_err(&client->dev, "firmware file '%s' not found\n", name);
 		goto err;
 	}
 
@@ -536,7 +536,7 @@ static int mn88473_probe(struct i2c_client *client,
 	/* Sleep because chip is active by default */
 	ret = regmap_write(dev->regmap[2], 0x05, 0x3e);
 	if (ret)
-		goto err_client_2_i2c_unregister_device;
+		goto err_regmap_2_regmap_exit;
 
 	/* Create dvb frontend */
 	memcpy(&dev->frontend.ops, &mn88473_ops, sizeof(dev->frontend.ops));
@@ -547,7 +547,8 @@ static int mn88473_probe(struct i2c_client *client,
 	dev_info(&client->dev, "Panasonic MN88473 successfully identified\n");
 
 	return 0;
-
+err_regmap_2_regmap_exit:
+	regmap_exit(dev->regmap[2]);
 err_client_2_i2c_unregister_device:
 	i2c_unregister_device(dev->client[2]);
 err_regmap_1_regmap_exit:

drivers/media/dvb-frontends/rtl2832.c

@@ -947,6 +947,8 @@ static int rtl2832_slave_ts_ctrl(struct i2c_client *client, bool enable)
 			goto err;
 	}
 
+	dev->slave_ts = enable;
+
 	return 0;
 err:
 	dev_dbg(&client->dev, "failed=%d\n", ret);
@@ -960,7 +962,7 @@ static int rtl2832_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
 	int ret;
 	u8 u8tmp;
 
-	dev_dbg(&client->dev, "onoff=%d\n", onoff);
+	dev_dbg(&client->dev, "onoff=%d, slave_ts=%d\n", onoff, dev->slave_ts);
 
 	/* enable / disable PID filter */
 	if (onoff)
@@ -968,7 +970,10 @@ static int rtl2832_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
 	else
 		u8tmp = 0x00;
 
-	ret = regmap_update_bits(dev->regmap, 0x061, 0xc0, u8tmp);
+	if (dev->slave_ts)
+		ret = regmap_update_bits(dev->regmap, 0x021, 0xc0, u8tmp);
+	else
+		ret = regmap_update_bits(dev->regmap, 0x061, 0xc0, u8tmp);
 	if (ret)
 		goto err;
 
@@ -986,8 +991,8 @@ static int rtl2832_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
 	int ret;
 	u8 buf[4];
 
-	dev_dbg(&client->dev, "index=%d pid=%04x onoff=%d\n",
-		index, pid, onoff);
+	dev_dbg(&client->dev, "index=%d pid=%04x onoff=%d slave_ts=%d\n",
+		index, pid, onoff, dev->slave_ts);
 
 	/* skip invalid PIDs (0x2000) */
 	if (pid > 0x1fff || index > 32)
@@ -1003,14 +1008,22 @@ static int rtl2832_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
 	buf[1] = (dev->filters >>  8) & 0xff;
 	buf[2] = (dev->filters >> 16) & 0xff;
 	buf[3] = (dev->filters >> 24) & 0xff;
-	ret = regmap_bulk_write(dev->regmap, 0x062, buf, 4);
+
+	if (dev->slave_ts)
+		ret = regmap_bulk_write(dev->regmap, 0x022, buf, 4);
+	else
+		ret = regmap_bulk_write(dev->regmap, 0x062, buf, 4);
 	if (ret)
 		goto err;
 
 	/* add PID */
 	buf[0] = (pid >> 8) & 0xff;
 	buf[1] = (pid >> 0) & 0xff;
-	ret = regmap_bulk_write(dev->regmap, 0x066 + 2 * index, buf, 2);
+
+	if (dev->slave_ts)
+		ret = regmap_bulk_write(dev->regmap, 0x026 + 2 * index, buf, 2);
+	else
+		ret = regmap_bulk_write(dev->regmap, 0x066 + 2 * index, buf, 2);
 	if (ret)
 		goto err;
 

drivers/media/dvb-frontends/rtl2832_priv.h

@@ -44,6 +44,7 @@ struct rtl2832_dev {
 	bool sleeping;
 	struct delayed_work i2c_gate_work;
 	unsigned long filters; /* PID filter */
+	bool slave_ts;
 };
 
 struct rtl2832_reg_entry {

drivers/media/media-device.c

@@ -423,7 +423,7 @@ static long media_device_ioctl(struct file *filp, unsigned int cmd,
 			       unsigned long arg)
 {
 	struct media_devnode *devnode = media_devnode_data(filp);
-	struct media_device *dev = to_media_device(devnode);
+	struct media_device *dev = devnode->media_dev;
 	long ret;
 
 	mutex_lock(&dev->graph_mutex);
@@ -495,7 +495,7 @@ static long media_device_compat_ioctl(struct file *filp, unsigned int cmd,
 				      unsigned long arg)
 {
 	struct media_devnode *devnode = media_devnode_data(filp);
-	struct media_device *dev = to_media_device(devnode);
+	struct media_device *dev = devnode->media_dev;
 	long ret;
 
 	switch (cmd) {
@@ -531,7 +531,8 @@ static const struct media_file_operations media_device_fops = {
 static ssize_t show_model(struct device *cd,
 			  struct device_attribute *attr, char *buf)
 {
-	struct media_device *mdev = to_media_device(to_media_devnode(cd));
+	struct media_devnode *devnode = to_media_devnode(cd);
+	struct media_device *mdev = devnode->media_dev;
 
 	return sprintf(buf, "%.*s\n", (int)sizeof(mdev->model), mdev->model);
 }
@@ -704,23 +705,35 @@ EXPORT_SYMBOL_GPL(media_device_cleanup);
 int __must_check __media_device_register(struct media_device *mdev,
 					 struct module *owner)
 {
+	struct media_devnode *devnode;
 	int ret;
 
+	devnode = kzalloc(sizeof(*devnode), GFP_KERNEL);
+	if (!devnode)
+		return -ENOMEM;
+
 	/* Register the device node. */
-	mdev->devnode.fops = &media_device_fops;
-	mdev->devnode.parent = mdev->dev;
-	mdev->devnode.release = media_device_release;
+	mdev->devnode = devnode;
+	devnode->fops = &media_device_fops;
+	devnode->parent = mdev->dev;
+	devnode->release = media_device_release;
 
 	/* Set version 0 to indicate user-space that the graph is static */
 	mdev->topology_version = 0;
 
-	ret = media_devnode_register(&mdev->devnode, owner);
-	if (ret < 0)
+	ret = media_devnode_register(mdev, devnode, owner);
+	if (ret < 0) {
+		/* devnode free is handled in media_devnode_*() */
+		mdev->devnode = NULL;
 		return ret;
+	}
 
-	ret = device_create_file(&mdev->devnode.dev, &dev_attr_model);
+	ret = device_create_file(&devnode->dev, &dev_attr_model);
 	if (ret < 0) {
-		media_devnode_unregister(&mdev->devnode);
+		/* devnode free is handled in media_devnode_*() */
+		mdev->devnode = NULL;
+		media_devnode_unregister_prepare(devnode);
+		media_devnode_unregister(devnode);
 		return ret;
 	}
 
@@ -771,11 +784,14 @@ void media_device_unregister(struct media_device *mdev)
 	mutex_lock(&mdev->graph_mutex);
 
 	/* Check if mdev was ever registered at all */
-	if (!media_devnode_is_registered(&mdev->devnode)) {
+	if (!media_devnode_is_registered(mdev->devnode)) {
 		mutex_unlock(&mdev->graph_mutex);
 		return;
 	}
 
+	/* Clear the devnode register bit to avoid races with media dev open */
+	media_devnode_unregister_prepare(mdev->devnode);
+
 	/* Remove all entities from the media device */
 	list_for_each_entry_safe(entity, next, &mdev->entities, graph_obj.list)
 		__media_device_unregister_entity(entity);
@@ -794,9 +810,12 @@ void media_device_unregister(struct media_device *mdev)
 
 	mutex_unlock(&mdev->graph_mutex);
 
-	device_remove_file(&mdev->devnode.dev, &dev_attr_model);
-	dev_dbg(mdev->dev, "Media device unregistering\n");
-	media_devnode_unregister(&mdev->devnode);
+	dev_dbg(mdev->dev, "Media device unregistered\n");
+
+	device_remove_file(&mdev->devnode->dev, &dev_attr_model);
+	media_devnode_unregister(mdev->devnode);
+	/* devnode free is handled in media_devnode_*() */
+	mdev->devnode = NULL;
 }
 EXPORT_SYMBOL_GPL(media_device_unregister);
 

drivers/media/media-devnode.c

@@ -44,6 +44,7 @@
 #include <linux/uaccess.h>
 
 #include <media/media-devnode.h>
+#include <media/media-device.h>
 
 #define MEDIA_NUM_DEVICES	256
 #define MEDIA_NAME		"media"
@@ -59,21 +60,19 @@ static DECLARE_BITMAP(media_devnode_nums, MEDIA_NUM_DEVICES);
 /* Called when the last user of the media device exits. */
 static void media_devnode_release(struct device *cd)
 {
-	struct media_devnode *mdev = to_media_devnode(cd);
+	struct media_devnode *devnode = to_media_devnode(cd);
 
 	mutex_lock(&media_devnode_lock);
-
-	/* Delete the cdev on this minor as well */
-	cdev_del(&mdev->cdev);
-
 	/* Mark device node number as free */
-	clear_bit(mdev->minor, media_devnode_nums);
-
+	clear_bit(devnode->minor, media_devnode_nums);
 	mutex_unlock(&media_devnode_lock);
 
 	/* Release media_devnode and perform other cleanups as needed. */
-	if (mdev->release)
-		mdev->release(mdev);
+	if (devnode->release)
+		devnode->release(devnode);
+
+	kfree(devnode);
+	pr_debug("%s: Media Devnode Deallocated\n", __func__);
 }
 
 static struct bus_type media_bus_type = {
@@ -83,37 +82,37 @@ static struct bus_type media_bus_type = {
 static ssize_t media_read(struct file *filp, char __user *buf,
 		size_t sz, loff_t *off)
 {
-	struct media_devnode *mdev = media_devnode_data(filp);
+	struct media_devnode *devnode = media_devnode_data(filp);
 
-	if (!mdev->fops->read)
+	if (!devnode->fops->read)
 		return -EINVAL;
-	if (!media_devnode_is_registered(mdev))
+	if (!media_devnode_is_registered(devnode))
 		return -EIO;
-	return mdev->fops->read(filp, buf, sz, off);
+	return devnode->fops->read(filp, buf, sz, off);
 }
 
 static ssize_t media_write(struct file *filp, const char __user *buf,
 		size_t sz, loff_t *off)
 {
-	struct media_devnode *mdev = media_devnode_data(filp);
+	struct media_devnode *devnode = media_devnode_data(filp);
 
-	if (!mdev->fops->write)
+	if (!devnode->fops->write)
 		return -EINVAL;
-	if (!media_devnode_is_registered(mdev))
+	if (!media_devnode_is_registered(devnode))
 		return -EIO;
-	return mdev->fops->write(filp, buf, sz, off);
+	return devnode->fops->write(filp, buf, sz, off);
 }
 
 static unsigned int media_poll(struct file *filp,
 			       struct poll_table_struct *poll)
 {
-	struct media_devnode *mdev = media_devnode_data(filp);
+	struct media_devnode *devnode = media_devnode_data(filp);
 
-	if (!media_devnode_is_registered(mdev))
+	if (!media_devnode_is_registered(devnode))
 		return POLLERR | POLLHUP;
-	if (!mdev->fops->poll)
+	if (!devnode->fops->poll)
 		return DEFAULT_POLLMASK;
-	return mdev->fops->poll(filp, poll);
+	return devnode->fops->poll(filp, poll);
 }
 
 static long
@@ -121,12 +120,12 @@ __media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg,
 	      long (*ioctl_func)(struct file *filp, unsigned int cmd,
 				 unsigned long arg))
 {
-	struct media_devnode *mdev = media_devnode_data(filp);
+	struct media_devnode *devnode = media_devnode_data(filp);
 
 	if (!ioctl_func)
 		return -ENOTTY;
 
-	if (!media_devnode_is_registered(mdev))
+	if (!media_devnode_is_registered(devnode))
 		return -EIO;
 
 	return ioctl_func(filp, cmd, arg);
@@ -134,9 +133,9 @@ __media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg,
 
 static long media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
-	struct media_devnode *mdev = media_devnode_data(filp);
+	struct media_devnode *devnode = media_devnode_data(filp);
 
-	return __media_ioctl(filp, cmd, arg, mdev->fops->ioctl);
+	return __media_ioctl(filp, cmd, arg, devnode->fops->ioctl);
 }
 
 #ifdef CONFIG_COMPAT
@@ -144,9 +143,9 @@ static long media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 static long media_compat_ioctl(struct file *filp, unsigned int cmd,
 			       unsigned long arg)
 {
-	struct media_devnode *mdev = media_devnode_data(filp);
+	struct media_devnode *devnode = media_devnode_data(filp);
 
-	return __media_ioctl(filp, cmd, arg, mdev->fops->compat_ioctl);
+	return __media_ioctl(filp, cmd, arg, devnode->fops->compat_ioctl);
 }
 
 #endif /* CONFIG_COMPAT */
@@ -154,7 +153,7 @@ static long media_compat_ioctl(struct file *filp, unsigned int cmd,
 /* Override for the open function */
 static int media_open(struct inode *inode, struct file *filp)
 {
-	struct media_devnode *mdev;
+	struct media_devnode *devnode;
 	int ret;
 
 	/* Check if the media device is available. This needs to be done with
@@ -164,23 +163,23 @@ static int media_open(struct inode *inode, struct file *filp)
 	 * a crash.
 	 */
 	mutex_lock(&media_devnode_lock);
-	mdev = container_of(inode->i_cdev, struct media_devnode, cdev);
+	devnode = container_of(inode->i_cdev, struct media_devnode, cdev);
 	/* return ENXIO if the media device has been removed
 	   already or if it is not registered anymore. */
-	if (!media_devnode_is_registered(mdev)) {
+	if (!media_devnode_is_registered(devnode)) {
 		mutex_unlock(&media_devnode_lock);
 		return -ENXIO;
 	}
 	/* and increase the device refcount */
-	get_device(&mdev->dev);
+	get_device(&devnode->dev);
 	mutex_unlock(&media_devnode_lock);
 
-	filp->private_data = mdev;
+	filp->private_data = devnode;
 
-	if (mdev->fops->open) {
-		ret = mdev->fops->open(filp);
+	if (devnode->fops->open) {
+		ret = devnode->fops->open(filp);
 		if (ret) {
-			put_device(&mdev->dev);
+			put_device(&devnode->dev);
 			filp->private_data = NULL;
 			return ret;
 		}
@@ -192,16 +191,18 @@ static int media_open(struct inode *inode, struct file *filp)
 /* Override for the release function */
 static int media_release(struct inode *inode, struct file *filp)
 {
-	struct media_devnode *mdev = media_devnode_data(filp);
+	struct media_devnode *devnode = media_devnode_data(filp);
 
-	if (mdev->fops->release)
-		mdev->fops->release(filp);
+	if (devnode->fops->release)
+		devnode->fops->release(filp);
 
 	filp->private_data = NULL;
 
 	/* decrease the refcount unconditionally since the release()
 	   return value is ignored. */
-	put_device(&mdev->dev);
+	put_device(&devnode->dev);
+
+	pr_debug("%s: Media Release\n", __func__);
 	return 0;
 }
 
@@ -219,7 +220,8 @@ static const struct file_operations media_devnode_fops = {
 	.llseek = no_llseek,
 };
 
-int __must_check media_devnode_register(struct media_devnode *mdev,
+int __must_check media_devnode_register(struct media_device *mdev,
+					struct media_devnode *devnode,
 					struct module *owner)
 {
 	int minor;
@@ -231,61 +233,80 @@ int __must_check media_devnode_register(struct media_devnode *mdev,
 	if (minor == MEDIA_NUM_DEVICES) {
 		mutex_unlock(&media_devnode_lock);
 		pr_err("could not get a free minor\n");
+		kfree(devnode);
 		return -ENFILE;
 	}
 
 	set_bit(minor, media_devnode_nums);
 	mutex_unlock(&media_devnode_lock);
 
-	mdev->minor = minor;
+	devnode->minor = minor;
+	devnode->media_dev = mdev;
+
+	/* Part 1: Initialize dev now to use dev.kobj for cdev.kobj.parent */
+	devnode->dev.bus = &media_bus_type;
+	devnode->dev.devt = MKDEV(MAJOR(media_dev_t), devnode->minor);
+	devnode->dev.release = media_devnode_release;
+	if (devnode->parent)
+		devnode->dev.parent = devnode->parent;
+	dev_set_name(&devnode->dev, "media%d", devnode->minor);
+	device_initialize(&devnode->dev);
 
 	/* Part 2: Initialize and register the character device */
-	cdev_init(&mdev->cdev, &media_devnode_fops);
-	mdev->cdev.owner = owner;
+	cdev_init(&devnode->cdev, &media_devnode_fops);
+	devnode->cdev.owner = owner;
+	devnode->cdev.kobj.parent = &devnode->dev.kobj;
 
-	ret = cdev_add(&mdev->cdev, MKDEV(MAJOR(media_dev_t), mdev->minor), 1);
+	ret = cdev_add(&devnode->cdev, MKDEV(MAJOR(media_dev_t), devnode->minor), 1);
 	if (ret < 0) {
 		pr_err("%s: cdev_add failed\n", __func__);
-		goto error;
+		goto cdev_add_error;
 	}
 
-	/* Part 3: Register the media device */
-	mdev->dev.bus = &media_bus_type;
-	mdev->dev.devt = MKDEV(MAJOR(media_dev_t), mdev->minor);
-	mdev->dev.release = media_devnode_release;
-	if (mdev->parent)
-		mdev->dev.parent = mdev->parent;
-	dev_set_name(&mdev->dev, "media%d", mdev->minor);
-	ret = device_register(&mdev->dev);
+	/* Part 3: Add the media device */
+	ret = device_add(&devnode->dev);
 	if (ret < 0) {
-		pr_err("%s: device_register failed\n", __func__);
-		goto error;
+		pr_err("%s: device_add failed\n", __func__);
+		goto device_add_error;
 	}
 
 	/* Part 4: Activate this minor. The char device can now be used. */
-	set_bit(MEDIA_FLAG_REGISTERED, &mdev->flags);
+	set_bit(MEDIA_FLAG_REGISTERED, &devnode->flags);
 
 	return 0;
 
-error:
+device_add_error:
+	cdev_del(&devnode->cdev);
+cdev_add_error:
 	mutex_lock(&media_devnode_lock);
-	cdev_del(&mdev->cdev);
-	clear_bit(mdev->minor, media_devnode_nums);
+	clear_bit(devnode->minor, media_devnode_nums);
+	devnode->media_dev = NULL;
 	mutex_unlock(&media_devnode_lock);
 
+	put_device(&devnode->dev);
 	return ret;
 }
 
-void media_devnode_unregister(struct media_devnode *mdev)
+void media_devnode_unregister_prepare(struct media_devnode *devnode)
 {
-	/* Check if mdev was ever registered at all */
-	if (!media_devnode_is_registered(mdev))
+	/* Check if devnode was ever registered at all */
+	if (!media_devnode_is_registered(devnode))
 		return;
 
 	mutex_lock(&media_devnode_lock);
-	clear_bit(MEDIA_FLAG_REGISTERED, &mdev->flags);
+	clear_bit(MEDIA_FLAG_REGISTERED, &devnode->flags);
+	mutex_unlock(&media_devnode_lock);
+}
+
+void media_devnode_unregister(struct media_devnode *devnode)
+{
+	mutex_lock(&media_devnode_lock);
+	/* Delete the cdev on this minor as well */
+	cdev_del(&devnode->cdev);
 	mutex_unlock(&media_devnode_lock);
-	device_unregister(&mdev->dev);
+	device_del(&devnode->dev);
+	devnode->media_dev = NULL;
+	put_device(&devnode->dev);
 }
 
 /*

drivers/media/pci/netup_unidvb/Kconfig

@@ -5,8 +5,13 @@ config DVB_NETUP_UNIDVB
     select VIDEOBUF2_VMALLOC
 	select DVB_HORUS3A if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_ASCOT2E if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_HELENE if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  Support for NetUP PCI express Universal DVB card.
-
+     help
+	Say Y when you want to support NetUP Dual Universal DVB card
+	Card can receive two independent streams in following standards:
+		DVB-S/S2, T/T2, C/C2
+	Two CI slots available for CAM modules.

drivers/media/pci/netup_unidvb/netup_unidvb.h

@@ -50,6 +50,15 @@
 #define NETUP_UNIDVB_IRQ_CAM0	(1 << 11)
 #define NETUP_UNIDVB_IRQ_CAM1	(1 << 12)
 
+/* NetUP Universal DVB card hardware revisions and it's PCI device id's:
+ * 1.3 - CXD2841ER demod, ASCOT2E and HORUS3A tuners
+ * 1.4 - CXD2854ER demod, HELENE tuner
+*/
+enum netup_hw_rev {
+	NETUP_HW_REV_1_3 = 0x18F6,
+	NETUP_HW_REV_1_4 = 0x18F7
+};
+
 struct netup_dma {
 	u8			num;
 	spinlock_t		lock;
@@ -119,6 +128,7 @@ struct netup_unidvb_dev {
 	struct netup_dma		dma[2];
 	struct netup_ci_state		ci[2];
 	struct netup_spi		*spi;
+	enum netup_hw_rev		rev;
 };
 
 int netup_i2c_register(struct netup_unidvb_dev *ndev);

drivers/media/pci/netup_unidvb/netup_unidvb_ci.c

@@ -147,7 +147,7 @@ static int netup_unidvb_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
 {
 	struct netup_ci_state *state = en50221->data;
 	struct netup_unidvb_dev *dev = state->dev;
-	u8 val = *((u8 __force *)state->membase8_io + addr);
+	u8 val = *((u8 __force *)state->membase8_config + addr);
 
 	dev_dbg(&dev->pci_dev->dev,
 		"%s(): addr=0x%x val=0x%x\n", __func__, addr, val);
@@ -162,7 +162,7 @@ static int netup_unidvb_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
 
 	dev_dbg(&dev->pci_dev->dev,
 		"%s(): addr=0x%x data=0x%x\n", __func__, addr, data);
-	*((u8 __force *)state->membase8_io + addr) = data;
+	*((u8 __force *)state->membase8_config + addr) = data;
 	return 0;
 }
 

drivers/media/platform/Kconfig

@@ -110,6 +110,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
 source "drivers/media/platform/s5p-tv/Kconfig"
 source "drivers/media/platform/am437x/Kconfig"
 source "drivers/media/platform/xilinx/Kconfig"
+source "drivers/media/platform/rcar-vin/Kconfig"
 
 config VIDEO_TI_CAL
 	tristate "TI CAL (Camera Adaptation Layer) driver"
@@ -247,10 +248,24 @@ config VIDEO_RENESAS_JPU
 	  To compile this driver as a module, choose M here: the module
 	  will be called rcar_jpu.
 
+config VIDEO_RENESAS_FCP
+	tristate "Renesas Frame Compression Processor"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on OF
+	---help---
+	  This is a driver for the Renesas Frame Compression Processor (FCP).
+	  The FCP is a companion module of video processing modules in the
+	  Renesas R-Car Gen3 SoCs. It handles memory access for the codec,
+	  VSP and FDP modules.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rcar-fcp.
+
 config VIDEO_RENESAS_VSP1
 	tristate "Renesas VSP1 Video Processing Engine"
 	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
 	depends on (ARCH_RENESAS && OF) || COMPILE_TEST
+	depends on !ARM64 || VIDEO_RENESAS_FCP
 	select VIDEOBUF2_DMA_CONTIG
 	---help---
 	  This is a V4L2 driver for the Renesas VSP1 video processing engine.

drivers/media/platform/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
 
 obj-$(CONFIG_SOC_CAMERA)		+= soc_camera/
 
+obj-$(CONFIG_VIDEO_RENESAS_FCP) 	+= rcar-fcp.o
 obj-$(CONFIG_VIDEO_RENESAS_JPU) 	+= rcar_jpu.o
 obj-$(CONFIG_VIDEO_RENESAS_VSP1)	+= vsp1/
 
@@ -55,4 +56,6 @@ obj-$(CONFIG_VIDEO_AM437X_VPFE)		+= am437x/
 
 obj-$(CONFIG_VIDEO_XILINX)		+= xilinx/
 
+obj-$(CONFIG_VIDEO_RCAR_VIN)		+= rcar-vin/
+
 ccflags-y += -I$(srctree)/drivers/media/i2c

drivers/media/platform/exynos-gsc/gsc-core.c

@@ -1124,6 +1124,7 @@ static int gsc_probe(struct platform_device *pdev)
 		goto err_m2m;
 
 	/* Initialize continious memory allocator */
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	gsc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(gsc->alloc_ctx)) {
 		ret = PTR_ERR(gsc->alloc_ctx);
@@ -1153,6 +1154,7 @@ static int gsc_remove(struct platform_device *pdev)
 	v4l2_device_unregister(&gsc->v4l2_dev);
 
 	vb2_dma_contig_cleanup_ctx(gsc->alloc_ctx);
+	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	gsc_clk_put(gsc);
 

drivers/media/platform/exynos4-is/fimc-core.c

@@ -1019,6 +1019,7 @@ static int fimc_probe(struct platform_device *pdev)
 	}
 
 	/* Initialize contiguous memory allocator */
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(fimc->alloc_ctx)) {
 		ret = PTR_ERR(fimc->alloc_ctx);
@@ -1124,6 +1125,7 @@ static int fimc_remove(struct platform_device *pdev)
 
 	fimc_unregister_capture_subdev(fimc);
 	vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx);
+	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
 
 	clk_disable(fimc->clock[CLK_BUS]);
 	fimc_clk_put(fimc);

drivers/media/platform/exynos4-is/fimc-is.c

@@ -847,6 +847,7 @@ static int fimc_is_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_pm;
 
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	is->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(is->alloc_ctx)) {
 		ret = PTR_ERR(is->alloc_ctx);
@@ -940,6 +941,7 @@ static int fimc_is_remove(struct platform_device *pdev)
 	free_irq(is->irq, is);
 	fimc_is_unregister_subdevs(is);
 	vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
+	vb2_dma_contig_clear_max_seg_size(dev);
 	fimc_is_put_clocks(is);
 	fimc_is_debugfs_remove(is);
 	release_firmware(is->fw.f_w);

drivers/media/platform/exynos4-is/fimc-lite.c

@@ -1551,6 +1551,7 @@ static int fimc_lite_probe(struct platform_device *pdev)
 			goto err_sd;
 	}
 
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(fimc->alloc_ctx)) {
 		ret = PTR_ERR(fimc->alloc_ctx);
@@ -1652,6 +1653,7 @@ static int fimc_lite_remove(struct platform_device *pdev)
 	pm_runtime_set_suspended(dev);
 	fimc_lite_unregister_capture_subdev(fimc);
 	vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx);
+	vb2_dma_contig_clear_max_seg_size(dev);
 	fimc_lite_clk_put(fimc);
 
 	dev_info(dev, "Driver unloaded\n");

drivers/media/platform/rcar-vin/Kconfig

+config VIDEO_RCAR_VIN
+	tristate "R-Car Video Input (VIN) Driver"
+	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  Support for Renesas R-Car Video Input (VIN) driver.
+	  Supports R-Car Gen2 SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rcar-vin.

drivers/media/platform/rcar-vin/Makefile

+rcar-vin-objs = rcar-core.o rcar-dma.o rcar-v4l2.o
+
+obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin.o

drivers/media/platform/s5p-g2d/g2d.c

@@ -681,6 +681,7 @@ static int g2d_probe(struct platform_device *pdev)
 		goto put_clk_gate;
 	}
 
+	vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
 	dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
 	if (IS_ERR(dev->alloc_ctx)) {
 		ret = PTR_ERR(dev->alloc_ctx);
@@ -757,6 +758,7 @@ static int g2d_remove(struct platform_device *pdev)
 	video_unregister_device(dev->vfd);
 	v4l2_device_unregister(&dev->v4l2_dev);
 	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx);
+	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
 	clk_unprepare(dev->gate);
 	clk_put(dev->gate);
 	clk_unprepare(dev->clk);

drivers/media/platform/s5p-jpeg/jpeg-core.c

@@ -2843,6 +2843,7 @@ static int s5p_jpeg_probe(struct platform_device *pdev)
 		goto device_register_rollback;
 	}
 
+	vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
 	jpeg->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
 	if (IS_ERR(jpeg->alloc_ctx)) {
 		v4l2_err(&jpeg->v4l2_dev, "Failed to init memory allocator\n");
@@ -2942,6 +2943,7 @@ static int s5p_jpeg_remove(struct platform_device *pdev)
 	video_unregister_device(jpeg->vfd_decoder);
 	video_unregister_device(jpeg->vfd_encoder);
 	vb2_dma_contig_cleanup_ctx(jpeg->alloc_ctx);
+	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
 	v4l2_m2m_release(jpeg->m2m_dev);
 	v4l2_device_unregister(&jpeg->v4l2_dev);
 

drivers/media/platform/s5p-mfc/s5p_mfc_pm.c

@@ -54,6 +54,7 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
 		pm->clock = clk_get(&dev->plat_dev->dev, MFC_SCLK_NAME);
 		if (IS_ERR(pm->clock)) {
 			mfc_info("Failed to get MFC special clock control\n");
+			pm->clock = NULL;
 		} else {
 			clk_set_rate(pm->clock, MFC_SCLK_RATE);
 			ret = clk_prepare_enable(pm->clock);