Commit 62c58af3 authored by Shashank Sharma's avatar Shashank Sharma Committed by Jani Nikula

drm/edid: detect SCDC support in HF-VSDB

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
  Thierry:
  - Fix typos in commit message and make abbreviation consistent
    across the commit message.
  - Change structure object name from hdmi_info -> hdmi
  - Fix typos and abbreviations in description of structure drm_hdmi_info
    end the description with a full stop.
  - Create a structure drm_scdc, and keep all information related to SCDC
    register set (supported, read request supported) etc in it.

  Ville:
  - Change rr -> read_request
  - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
    of HF-VSDB parsing can be kept in same function, in incremental
    patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
  - Add clock rate calculations for 1/10 and 1/40 ratios
  - Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: default avatarShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: default avatarThierry Reding <treding@nvidia.com>
Reviewed-by: default avatarJose Abreu <joabreu@synopsys.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
parent afa1c763
......@@ -37,6 +37,7 @@
#include <drm/drm_edid.h>
#include <drm/drm_encoder.h>
#include <drm/drm_displayid.h>
#include <drm/drm_scdc_helper.h>
#include "drm_crtc_internal.h"
......@@ -3817,13 +3818,43 @@ EXPORT_SYMBOL(drm_default_rgb_quant_range);
static void drm_parse_hdmi_forum_vsdb(struct drm_connector *connector,
const u8 *hf_vsdb)
{
struct drm_hdmi_info *hdmi = &connector->display_info.hdmi;
struct drm_display_info *display = &connector->display_info;
struct drm_hdmi_info *hdmi = &display->hdmi;
if (hf_vsdb[6] & 0x80) {
hdmi->scdc.supported = true;
if (hf_vsdb[6] & 0x40)
hdmi->scdc.read_request = true;
}
/*
* All HDMI 2.0 monitors must support scrambling at rates > 340 MHz.
* And as per the spec, three factors confirm this:
* * Availability of a HF-VSDB block in EDID (check)
* * Non zero Max_TMDS_Char_Rate filed in HF-VSDB (let's check)
* * SCDC support available (let's check)
* Lets check it out.
*/
if (hf_vsdb[5]) {
/* max clock is 5000 KHz times block value */
u32 max_tmds_clock = hf_vsdb[5] * 5000;
struct drm_scdc *scdc = &hdmi->scdc;
if (max_tmds_clock > 340000) {
display->max_tmds_clock = max_tmds_clock;
DRM_DEBUG_KMS("HF-VSDB: max TMDS clock %d kHz\n",
display->max_tmds_clock);
}
if (scdc->supported) {
scdc->scrambling.supported = true;
/* Few sinks support scrambling for cloks < 340M */
if ((hf_vsdb[6] & 0x8))
scdc->scrambling.low_rates = true;
}
}
}
static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
......
......@@ -22,8 +22,10 @@
*/
#include <linux/slab.h>
#include <linux/delay.h>
#include <drm/drm_scdc_helper.h>
#include <drm/drmP.h>
/**
* DOC: scdc helpers
......@@ -121,3 +123,122 @@ ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
return 0;
}
EXPORT_SYMBOL(drm_scdc_write);
/**
* drm_scdc_check_scrambling_status - what is status of scrambling?
* @adapter: I2C adapter for DDC channel
*
* Reads the scrambler status over SCDC, and checks the
* scrambling status.
*
* Returns:
* True if the scrambling is enabled, false otherwise.
*/
bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter)
{
u8 status;
int ret;
ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status);
if (ret < 0) {
DRM_ERROR("Failed to read scrambling status, error %d\n", ret);
return false;
}
return status & SCDC_SCRAMBLING_STATUS;
}
EXPORT_SYMBOL(drm_scdc_get_scrambling_status);
/**
* drm_scdc_set_scrambling - enable scrambling
* @adapter: I2C adapter for DDC channel
* @enable: bool to indicate if scrambling is to be enabled/disabled
*
* Writes the TMDS config register over SCDC channel, and:
* enables scrambling when enable = 1
* disables scrambling when enable = 0
*
* Returns:
* True if scrambling is set/reset successfully, false otherwise.
*/
bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
{
u8 config;
int ret;
ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
if (ret < 0) {
DRM_ERROR("Failed to read tmds config, err=%d\n", ret);
return false;
}
if (enable)
config |= SCDC_SCRAMBLING_ENABLE;
else
config &= ~SCDC_SCRAMBLING_ENABLE;
ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
if (ret < 0) {
DRM_ERROR("Failed to enable scrambling, error %d\n", ret);
return false;
}
return true;
}
EXPORT_SYMBOL(drm_scdc_set_scrambling);
/**
* drm_scdc_set_high_tmds_clock_ratio - set TMDS clock ratio
* @adapter: I2C adapter for DDC channel
* @set: ret or reset the high clock ratio
*
* TMDS clock ratio calculations go like this:
* TMDS character = 10 bit TMDS encoded value
* TMDS character rate = The rate at which TMDS characters are transmitted(Mcsc)
* TMDS bit rate = 10x TMDS character rate
* As per the spec:
* TMDS clock rate for pixel clock < 340 MHz = 1x the character rate
* = 1/10 pixel clock rate
* TMDS clock rate for pixel clock > 340 MHz = 0.25x the character rate
* = 1/40 pixel clock rate
*
* Writes to the TMDS config register over SCDC channel, and:
* sets TMDS clock ratio to 1/40 when set = 1
* sets TMDS clock ratio to 1/10 when set = 0
*
* Returns:
* True if write is successful, false otherwise.
*/
bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
{
u8 config;
int ret;
ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
if (ret < 0) {
DRM_ERROR("Failed to read tmds config, err=%d\n", ret);
return false;
}
if (set)
config |= SCDC_TMDS_BIT_CLOCK_RATIO_BY_40;
else
config &= ~SCDC_TMDS_BIT_CLOCK_RATIO_BY_40;
ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
if (ret < 0) {
DRM_ERROR("Failed to set TMDS clock ratio, error %d\n", ret);
return false;
}
/*
* The spec says that a source should wait minimum 1ms and maximum
* 100ms after writing the TMDS config for clock ratio. Lets allow a
* wait of upto 2ms here.
*/
usleep_range(1000, 2000);
return true;
}
EXPORT_SYMBOL(drm_scdc_set_high_tmds_clock_ratio);
......@@ -90,6 +90,20 @@ enum subpixel_order {
};
/**
* struct drm_scrambling: sink's scrambling support.
*/
struct drm_scrambling {
/**
* @supported: scrambling supported for rates > 340 Mhz.
*/
bool supported;
/**
* @low_rates: scrambling supported for rates <= 340 Mhz.
*/
bool low_rates;
};
/*
* struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink
*
......@@ -105,8 +119,13 @@ struct drm_scdc {
* @read_request: sink is capable of generating scdc read request.
*/
bool read_request;
/**
* @scrambling: sink's scrambling capabilities
*/
struct drm_scrambling scrambling;
};
/**
* struct drm_hdmi_info - runtime information about the connected HDMI sink
*
......
......@@ -476,5 +476,4 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
int hsize, int vsize, int fresh,
bool rb);
#endif /* __DRM_EDID_H__ */
......@@ -129,4 +129,31 @@ static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset,
return drm_scdc_write(adapter, offset, &value, sizeof(value));
}
/**
* drm_scdc_set_scrambling - enable scrambling
* @adapter: I2C adapter for DDC channel
* @enable: bool to indicate if scrambling is to be enabled/disabled
*
* Writes the TMDS config register over SCDC channel, and:
* enables scrambling when enable = 1
* disables scrambling when enable = 0
*
* Returns:
* True if scrambling is set/reset successfully, false otherwise.
*/
bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable);
/**
* drm_scdc_set_high_tmds_clock_ratio - set TMDS clock ratio
* @adapter: I2C adapter for DDC channel
* @set: ret or reset the high clock ratio
*
* Writes to the TMDS config register over SCDC channel, and:
* sets TMDS clock ratio to 1/40 when set = 1
* sets TMDS clock ratio to 1/10 when set = 0
*
* Returns:
* True if write is successful, false otherwise.
*/
bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment