Merge tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Three driver fixes. The Intel fix looks like the most important.

   - Fix a potential divide by zero in pinctrl-singe (OMAP and
     HiSilicon)

   - Disable IRQs on startup in the Mediatek driver. This is a classic,
     we should be looking out for this more.

   - Save and restore pins in 'direct IRQ' mode in the Intel driver,
     this works around firmware bugs"

* tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: intel: Save and restore pins in "direct IRQ" mode
  pinctrl: meditatek: Startup with the IRQs disabled
  pinctrl: single: Fix potential division by zero

drivers/pinctrl/intel/pinctrl-intel.c

@@ -436,9 +436,14 @@ static void __intel_gpio_set_direction(void __iomem *padcfg0, bool input)
 	writel(value, padcfg0);
 }
 
+static int __intel_gpio_get_gpio_mode(u32 value)
+{
+	return (value & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
+}
+
 static int intel_gpio_get_gpio_mode(void __iomem *padcfg0)
 {
-	return (readl(padcfg0) & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
+	return __intel_gpio_get_gpio_mode(readl(padcfg0));
 }
 
 static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
@@ -1674,6 +1679,7 @@ EXPORT_SYMBOL_GPL(intel_pinctrl_get_soc_data);
 static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int pin)
 {
 	const struct pin_desc *pd = pin_desc_get(pctrl->pctldev, pin);
+	u32 value;
 
 	if (!pd || !intel_pad_usable(pctrl, pin))
 		return false;
@@ -1688,6 +1694,25 @@ static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int
 	    gpiochip_line_is_irq(&pctrl->chip, intel_pin_to_gpio(pctrl, pin)))
 		return true;
 
+	/*
+	 * The firmware on some systems may configure GPIO pins to be
+	 * an interrupt source in so called "direct IRQ" mode. In such
+	 * cases the GPIO controller driver has no idea if those pins
+	 * are being used or not. At the same time, there is a known bug
+	 * in the firmwares that don't restore the pin settings correctly
+	 * after suspend, i.e. by an unknown reason the Rx value becomes
+	 * inverted.
+	 *
+	 * Hence, let's save and restore the pins that are configured
+	 * as GPIOs in the input mode with GPIROUTIOXAPIC bit set.
+	 *
+	 * See https://bugzilla.kernel.org/show_bug.cgi?id=214749.
+	 */
+	value = readl(intel_get_padcfg(pctrl, pin, PADCFG0));
+	if ((value & PADCFG0_GPIROUTIOXAPIC) && (value & PADCFG0_GPIOTXDIS) &&
+	    (__intel_gpio_get_gpio_mode(value) == PADCFG0_PMODE_GPIO))
+		return true;
+
 	return false;
 }
 

drivers/pinctrl/mediatek/mtk-eint.c

@@ -303,12 +303,15 @@ static struct irq_chip mtk_eint_irq_chip = {
 
 static unsigned int mtk_eint_hw_init(struct mtk_eint *eint)
 {
-	void __iomem *reg = eint->base + eint->regs->dom_en;
+	void __iomem *dom_en = eint->base + eint->regs->dom_en;
+	void __iomem *mask_set = eint->base + eint->regs->mask_set;
 	unsigned int i;
 
 	for (i = 0; i < eint->hw->ap_num; i += 32) {
-		writel(0xffffffff, reg);
-		reg += 4;
+		writel(0xffffffff, dom_en);
+		writel(0xffffffff, mask_set);
+		dom_en += 4;
+		mask_set += 4;
 	}
 
 	return 0;

drivers/pinctrl/pinctrl-single.c

@@ -727,7 +727,7 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
 
 	mux_bytes = pcs->width / BITS_PER_BYTE;
 
-	if (pcs->bits_per_mux) {
+	if (pcs->bits_per_mux && pcs->fmask) {
 		pcs->bits_per_pin = fls(pcs->fmask);
 		nr_pins = (pcs->size * BITS_PER_BYTE) / pcs->bits_per_pin;
 	} else {