ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage

The current set minimum voltage of 730000µV seems to be wrong. I don't
know the document which specifies that but the imx6qdl datasheets says
that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed,
lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp).

Fixes: ddec5d1c ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi

@@ -112,7 +112,7 @@ watchdog {
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <730000>;
+				regulator-min-microvolt = <925000>;
 				regulator-max-microvolt = <1380000>;
 				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
@@ -120,7 +120,7 @@ vdd_arm: buck1 {
 
 			vdd_soc: buck2 {
 				regulator-name = "vdd_soc";
-				regulator-min-microvolt = <730000>;
+				regulator-min-microvolt = <1150000>;
 				regulator-max-microvolt = <1380000>;
 				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;