Commit 63796b74 authored by Alessandro Rubini's avatar Alessandro Rubini Committed by Russell King

[ARM] 5585/1: nomadik: add gpio-i2c devices

Signed-off-by: default avatarAlessandro Rubini <rubini@unipv.it>
Acked-by: default avatarAndrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 2ec1d359
...@@ -11,4 +11,11 @@ endmenu ...@@ -11,4 +11,11 @@ endmenu
config NOMADIK_8815 config NOMADIK_8815
bool bool
config I2C_BITBANG_8815NHK
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
select I2C_ALGOBIT
default y
endif endif
...@@ -14,3 +14,6 @@ obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o ...@@ -14,3 +14,6 @@ obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
# Specific board support # Specific board support
obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
# Nomadik extra devices
obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
/*
* There are two busses in the 8815NHK.
* They could, in theory, be driven by the hardware component, but we
* use bit-bang through GPIO by now, to keep things simple
*/
static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 62,
.sda_pin = 63,
};
static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 53,
.sda_pin = 54,
};
/* first bus: GPIO XX and YY */
static struct platform_device nhk8815_i2c_dev0 = {
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = &nhk8815_i2c_data0,
},
};
/* second bus: GPIO XX and YY */
static struct platform_device nhk8815_i2c_dev1 = {
.name = "i2c-gpio",
.id = 1,
.dev = {
.platform_data = &nhk8815_i2c_data1,
},
};
static int __init nhk8815_i2c_init(void)
{
nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
platform_device_register(&nhk8815_i2c_dev0);
nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
platform_device_register(&nhk8815_i2c_dev1);
return 0;
}
static void __exit nhk8815_i2c_exit(void)
{
platform_device_unregister(&nhk8815_i2c_dev0);
platform_device_unregister(&nhk8815_i2c_dev1);
return;
}
module_init(nhk8815_i2c_init);
module_exit(nhk8815_i2c_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment