Commit 6380d62a authored by Simon Horman's avatar Simon Horman

ARM: shmobile: gose: Add QSPI device to DT

Enable the QSPI controller in the gose device tree.

Based on similar work for the silk board by Vladimir Barinov and
Sergei Shtylyov.
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Acked-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
parent 469352ad
...@@ -57,6 +57,11 @@ phy1_pins: phy1 { ...@@ -57,6 +57,11 @@ phy1_pins: phy1 {
renesas,groups = "intc_irq0"; renesas,groups = "intc_irq0";
renesas,function = "intc"; renesas,function = "intc";
}; };
qspi_pins: spi0 {
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
};
}; };
&ether { &ether {
...@@ -92,3 +97,41 @@ &scif1 { ...@@ -92,3 +97,41 @@ &scif1 {
status = "okay"; status = "okay";
}; };
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
status = "okay";
flash@0 {
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-cpol;
spi-cpha;
m25p,fast-read;
partitions {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "loader";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "user";
reg = <0x00040000 0x00400000>;
read-only;
};
partition@440000 {
label = "flash";
reg = <0x00440000 0x03bc0000>;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment