sh: Kill off machvec IRQ hinting.

Everything is using sparseirq these days, so we have no need to
arbitrarily size nr_irqs ahead of time. The legacy IRQ pre-allocation
likewise has no meaning for us, so that's killed off too. We now depend
on nr_irqs expansion by the generic hardirq layer instead.

It's also worth noting that the majority of boards had completely bogus
values for their nr_irqs relative to their CPU and configurations, so
this ends up correcting behaviour for quite a few platforms.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/board-edosk7705.c

@@ -74,6 +74,5 @@ device_initcall(init_edosk7705_devices);
  */
 static struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_name		= "EDOSK7705",
-	.mv_nr_irqs		= 80,
 	.mv_init_irq		= sh_edosk7705_init_irq,
 };

arch/sh/boards/board-edosk7760.c

@@ -188,5 +188,4 @@ device_initcall(init_edosk7760_devices);
  */
 struct sh_machine_vector mv_edosk7760 __initmv = {
 	.mv_name	= "EDOSK7760",
-	.mv_nr_irqs	= 128,
 };

arch/sh/boards/board-polaris.c

@@ -141,6 +141,5 @@ static void __init init_polaris_irq(void)
 
 static struct sh_machine_vector mv_polaris __initmv = {
 	.mv_name		= "Polaris",
-	.mv_nr_irqs		= 61,
 	.mv_init_irq		= init_polaris_irq,
 };

arch/sh/boards/board-secureedge5410.c

@@ -71,6 +71,5 @@ static void __init init_snapgear_IRQ(void)
  */
 static struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_name		= "SnapGear SecureEdge5410",
-	.mv_nr_irqs		= 72,
 	.mv_init_irq		= init_snapgear_IRQ,
 };

arch/sh/boards/mach-cayman/setup.c

@@ -181,7 +181,6 @@ extern void init_cayman_irq(void);
 
 static struct sh_machine_vector mv_cayman __initmv = {
 	.mv_name		= "Hitachi Cayman",
-	.mv_nr_irqs		= 64,
 	.mv_ioport_map		= cayman_ioport_map,
 	.mv_init_irq		= init_cayman_irq,
 };

arch/sh/boards/mach-hp6xx/setup.c

@@ -169,8 +169,6 @@ device_initcall(hp6xx_devices_setup);
 static struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_name = "hp6xx",
 	.mv_setup = hp6xx_setup,
-	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
-	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
 	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
 	.mv_init_irq = hp6xx_init_irq,
 };

arch/sh/boards/mach-lboxre2/setup.c

@@ -79,6 +79,5 @@ device_initcall(lboxre2_devices_setup);
  */
 static struct sh_machine_vector mv_lboxre2 __initmv = {
 	.mv_name		= "L-BOX RE2",
-	.mv_nr_irqs		= 72,
 	.mv_init_irq		= init_lboxre2_IRQ,
 };

arch/sh/boards/mach-microdev/setup.c

@@ -194,7 +194,6 @@ device_initcall(microdev_devices_setup);
  */
 static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
-	.mv_nr_irqs		= 72,
 	.mv_ioport_map		= microdev_ioport_map,
 	.mv_init_irq		= init_microdev_irq,
 };

arch/sh/boards/mach-sdk7780/setup.c

@@ -94,7 +94,6 @@ static void __init sdk7780_setup(char **cmdline_p)
 static struct sh_machine_vector mv_se7780 __initmv = {
 	.mv_name        = "Renesas SDK7780-R3" ,
 	.mv_setup		= sdk7780_setup,
-	.mv_nr_irqs		= 111,
 	.mv_init_irq	= init_sdk7780_IRQ,
 };
 

arch/sh/boards/mach-se/7206/setup.c

@@ -90,7 +90,6 @@ static int se7206_mode_pins(void)
 
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
-	.mv_nr_irqs		= 256,
 	.mv_init_irq		= init_se7206_IRQ,
 	.mv_mode_pins		= se7206_mode_pins,
 };

arch/sh/boards/mach-se/770x/setup.c

@@ -184,16 +184,5 @@ device_initcall(se_devices_setup);
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_setup		= smsc_setup,
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-	.mv_nr_irqs		= 86,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-	.mv_nr_irqs             = 104,
-#endif
 	.mv_init_irq		= init_se_IRQ,
 };

arch/sh/boards/mach-se/7721/setup.c

@@ -92,6 +92,5 @@ static void __init se7721_setup(char **cmdline_p)
 struct sh_machine_vector mv_se7721 __initmv = {
 	.mv_name		= "Solution Engine 7721",
 	.mv_setup		= se7721_setup,
-	.mv_nr_irqs		= 109,
 	.mv_init_irq		= init_se7721_IRQ,
 };

arch/sh/boards/mach-se/7724/setup.c

@@ -929,5 +929,4 @@ device_initcall(devices_setup);
 static struct sh_machine_vector mv_ms7724se __initmv = {
 	.mv_name	= "ms7724se",
 	.mv_init_irq	= init_se7724_IRQ,
-	.mv_nr_irqs	= SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR,
 };

arch/sh/boards/mach-se/7751/setup.c

@@ -55,6 +55,5 @@ device_initcall(se7751_devices_setup);
  */
 static struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
-	.mv_nr_irqs		= 72,
 	.mv_init_irq		= init_7751se_IRQ,
 };

arch/sh/boards/mach-se/7780/setup.c

@@ -110,6 +110,5 @@ static void __init se7780_setup(char **cmdline_p)
 static struct sh_machine_vector mv_se7780 __initmv = {
 	.mv_name                = "Solution Engine 7780" ,
 	.mv_setup               = se7780_setup ,
-	.mv_nr_irqs		= 111 ,
 	.mv_init_irq		= init_se7780_IRQ,
 };

arch/sh/boards/mach-se/board-se7619.c

@@ -22,6 +22,5 @@ static int se7619_mode_pins(void)
 
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
-	.mv_nr_irqs		= 108,
 	.mv_mode_pins		= se7619_mode_pins,
 };

arch/sh/boards/mach-sh03/setup.c

@@ -101,6 +101,5 @@ device_initcall(sh03_devices_setup);
 static struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",
 	.mv_setup		= sh03_setup,
-	.mv_nr_irqs		= 48,
 	.mv_init_irq		= init_sh03_IRQ,
 };

arch/sh/boards/mach-sh7763rdp/setup.c

@@ -214,6 +214,5 @@ static void __init sh7763rdp_setup(char **cmdline_p)
 static struct sh_machine_vector mv_sh7763rdp __initmv = {
 	.mv_name = "sh7763drp",
 	.mv_setup = sh7763rdp_setup,
-	.mv_nr_irqs = 112,
 	.mv_init_irq = init_sh7763rdp_IRQ,
 };

arch/sh/include/asm/irq.h

@@ -5,12 +5,15 @@
 #include <asm/machvec.h>
 
 /*
- * A sane default based on a reasonable vector table size, platforms are
- * advised to cap this at the hard limit that they're interested in
- * through the machvec.
+ * Only legacy non-sparseirq platforms have to set a reasonably sane
+ * value here. sparseirq platforms allocate their irq_descs on the fly,
+ * so will expand automatically based on the number of registered IRQs.
  */
-#define NR_IRQS			512
-#define NR_IRQS_LEGACY		8	/* Legacy external IRQ0-7 */
+#ifdef CONFIG_SPARSE_IRQ
+# define NR_IRQS		8
+#else
+# define NR_IRQS		512
+#endif
 
 /*
  * This is a special IRQ number for indicating that no IRQ has been

arch/sh/include/asm/machvec.h

@@ -17,7 +17,6 @@
 struct sh_machine_vector {
 	void (*mv_setup)(char **cmdline_p);
 	const char *mv_name;
-	int mv_nr_irqs;
 
 	int (*mv_irq_demux)(int irq);
 	void (*mv_init_irq)(void);

arch/sh/kernel/irq.c

@@ -234,8 +234,10 @@ void __init init_IRQ(void)
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
-	nr_irqs = sh_mv.mv_nr_irqs;
-	return NR_IRQS_LEGACY;
+	/*
+	 * No pre-allocated IRQs.
+	 */
+	return 0;
 }
 #endif
 

arch/sh/kernel/machvec.c

@@ -121,7 +121,4 @@ void __init sh_mv_setup(void)
 	mv_set(irq_demux);
 	mv_set(mode_pins);
 	mv_set(mem_init);
-
-	if (!sh_mv.mv_nr_irqs)
-		sh_mv.mv_nr_irqs = NR_IRQS;
 }