Merge branch 'net-phy-cleanups'

Weihang Li says:

====================
net: phy: fix some coding-style issues

Make some cleanups according to the coding style of kernel.

Changes since v1:
- Update commit description of #1 and #3.
- Avoid changing the indentation in #2.
- Change a group of if-else statement into switch from #4 and put it into
  a single patch.
- Put '|' at the end of line in #5 and #7.
- Avoid deleting spaces in definition of 'settings' in #5.
- Drop #8 from the series which needs more discussion with David.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/bcm87xx.c

@@ -54,9 +54,9 @@ static int bcm87xx_of_reg_init(struct phy_device *phydev)
 		u16 reg		= be32_to_cpup(paddr++);
 		u16 mask	= be32_to_cpup(paddr++);
 		u16 val_bits	= be32_to_cpup(paddr++);
-		int val;
 		u32 regnum = mdiobus_c45_addr(devid, reg);
-		val = 0;
+		int val = 0;
+
 		if (mask) {
 			val = phy_read(phydev, regnum);
 			if (val < 0) {

drivers/net/phy/davicom.c

@@ -43,10 +43,10 @@
 #define MII_DM9161_INTR_DPLX_CHANGE	0x0010
 #define MII_DM9161_INTR_SPD_CHANGE	0x0008
 #define MII_DM9161_INTR_LINK_CHANGE	0x0004
-#define MII_DM9161_INTR_INIT 		0x0000
+#define MII_DM9161_INTR_INIT		0x0000
 #define MII_DM9161_INTR_STOP	\
-(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
- | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+	(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK |	\
+	 MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
 #define MII_DM9161_INTR_CHANGE	\
 	(MII_DM9161_INTR_DPLX_CHANGE | \
 	 MII_DM9161_INTR_SPD_CHANGE | \

drivers/net/phy/dp83640.c

@@ -170,9 +170,9 @@ static ushort gpio_tab[GPIO_TABLE_SIZE] = {
 module_param(chosen_phy, int, 0444);
 module_param_array(gpio_tab, ushort, NULL, 0444);
 
-MODULE_PARM_DESC(chosen_phy, \
+MODULE_PARM_DESC(chosen_phy,
 	"The address of the PHY to use for the ancillary clock features");
-MODULE_PARM_DESC(gpio_tab, \
+MODULE_PARM_DESC(gpio_tab,
 	"Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6");
 
 static void dp83640_gpio_defaults(struct ptp_pin_desc *pd)
@@ -615,6 +615,7 @@ static void prune_rx_ts(struct dp83640_private *dp83640)
 static void enable_broadcast(struct phy_device *phydev, int init_page, int on)
 {
 	int val;
+
 	phy_write(phydev, PAGESEL, 0);
 	val = phy_read(phydev, PHYCR2);
 	if (on)

drivers/net/phy/et1011c.c

@@ -46,8 +46,8 @@ MODULE_LICENSE("GPL");
 
 static int et1011c_config_aneg(struct phy_device *phydev)
 {
-	int ctl = 0;
-	ctl = phy_read(phydev, MII_BMCR);
+	int ctl = phy_read(phydev, MII_BMCR);
+
 	if (ctl < 0)
 		return ctl;
 	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
@@ -60,9 +60,10 @@ static int et1011c_config_aneg(struct phy_device *phydev)
 
 static int et1011c_read_status(struct phy_device *phydev)
 {
+	static int speed;
 	int ret;
 	u32 val;
-	static int speed;
+
 	ret = genphy_read_status(phydev);
 
 	if (speed != phydev->speed) {
@@ -72,10 +73,10 @@ static int et1011c_read_status(struct phy_device *phydev)
 					ET1011C_GIGABIT_SPEED) {
 			val = phy_read(phydev, ET1011C_CONFIG_REG);
 			val &= ~ET1011C_TX_FIFO_MASK;
-			phy_write(phydev, ET1011C_CONFIG_REG, val\
-					| ET1011C_GMII_INTERFACE\
-					| ET1011C_SYS_CLK_EN\
-					| ET1011C_TX_FIFO_DEPTH_16);
+			phy_write(phydev, ET1011C_CONFIG_REG, val |
+					  ET1011C_GMII_INTERFACE |
+					  ET1011C_SYS_CLK_EN |
+					  ET1011C_TX_FIFO_DEPTH_16);
 
 		}
 	}

drivers/net/phy/fixed_phy.c

@@ -161,8 +161,8 @@ static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr,
 }
 
 int fixed_phy_add(unsigned int irq, int phy_addr,
-		  struct fixed_phy_status *status) {
-
+		  struct fixed_phy_status *status)
+{
 	return fixed_phy_add_gpiod(irq, phy_addr, status, NULL);
 }
 EXPORT_SYMBOL_GPL(fixed_phy_add);

drivers/net/phy/lxt.c

@@ -242,8 +242,8 @@ static int lxt973a2_read_status(struct phy_device *phydev)
 				return lpa;
 
 			/* If both registers are equal, it is suspect but not
-			* impossible, hence a new try
-			*/
+			 * impossible, hence a new try
+			 */
 		} while (lpa == adv && retry--);
 
 		mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa);

drivers/net/phy/marvell.c

@@ -809,14 +809,19 @@ static int m88e1111_config_init_rgmii_delays(struct phy_device *phydev)
 {
 	int delay;
 
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_RGMII_ID:
 		delay = MII_M1111_RGMII_RX_DELAY | MII_M1111_RGMII_TX_DELAY;
-	} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		break;
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 		delay = MII_M1111_RGMII_RX_DELAY;
-	} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		break;
+	case PHY_INTERFACE_MODE_RGMII_TXID:
 		delay = MII_M1111_RGMII_TX_DELAY;
-	} else {
+		break;
+	default:
 		delay = 0;
+		break;
 	}
 
 	return phy_modify(phydev, MII_M1111_PHY_EXT_CR,

drivers/net/phy/mdio_bus.c

@@ -175,6 +175,7 @@ EXPORT_SYMBOL(mdiobus_alloc_size);
 static void mdiobus_release(struct device *d)
 {
 	struct mii_bus *bus = to_mii_bus(d);
+
 	BUG_ON(bus->state != MDIOBUS_RELEASED &&
 	       /* for compatibility with error handling in drivers */
 	       bus->state != MDIOBUS_ALLOCATED);

drivers/net/phy/mdio_device.c

@@ -77,7 +77,7 @@ int mdio_device_register(struct mdio_device *mdiodev)
 {
 	int err;
 
-	dev_dbg(&mdiodev->dev, "mdio_device_register\n");
+	dev_dbg(&mdiodev->dev, "%s\n", __func__);
 
 	err = mdiobus_register_device(mdiodev);
 	if (err)
@@ -188,7 +188,7 @@ int mdio_driver_register(struct mdio_driver *drv)
 	struct mdio_driver_common *mdiodrv = &drv->mdiodrv;
 	int retval;
 
-	pr_debug("mdio_driver_register: %s\n", mdiodrv->driver.name);
+	pr_debug("%s: %s\n", __func__, mdiodrv->driver.name);
 
 	mdiodrv->driver.bus = &mdio_bus_type;
 	mdiodrv->driver.probe = mdio_probe;

drivers/net/phy/national.c

@@ -68,7 +68,8 @@ static int ns_ack_interrupt(struct phy_device *phydev)
 		return ret;
 
 	/* Clear the interrupt status bit by writing a “1”
-	 * to the corresponding bit in INT_CLEAR (2:0 are reserved) */
+	 * to the corresponding bit in INT_CLEAR (2:0 are reserved)
+	 */
 	ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7);
 
 	return ret;
@@ -150,7 +151,8 @@ static int ns_config_init(struct phy_device *phydev)
 {
 	ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON);
 	/* In the latest MAC or switches design, the 10 Mbps loopback
-	   is desired to be turned off. */
+	 * is desired to be turned off.
+	 */
 	ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off);
 	return ns_ack_interrupt(phydev);
 }

drivers/net/phy/phy-c45.c

@@ -172,7 +172,7 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg);
  * @phydev: target phy_device struct
  *
  * Disable auto-negotiation in the Clause 45 PHY. The link parameters
- * parameters are controlled through the PMA/PMD MMD registers.
+ * are controlled through the PMA/PMD MMD registers.
  *
  * Returns zero on success, negative errno code on failure.
  */

drivers/net/phy/phy-core.c

@@ -76,7 +76,8 @@ EXPORT_SYMBOL_GPL(phy_duplex_to_str);
 
 /* A mapping of all SUPPORTED settings to speed/duplex.  This table
  * must be grouped by speed and sorted in descending match priority
- * - iow, descending speed. */
+ * - iow, descending speed.
+ */
 
 #define PHY_SETTING(s, d, b) { .speed = SPEED_ ## s, .duplex = DUPLEX_ ## d, \
 			       .bit = ETHTOOL_LINK_MODE_ ## b ## _BIT}

drivers/net/phy/phy.c

@@ -380,8 +380,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 					else if (val & BMCR_SPEED100)
 						phydev->speed = SPEED_100;
 					else phydev->speed = SPEED_10;
-				}
-				else {
+				} else {
 					if (phydev->autoneg == AUTONEG_DISABLE)
 						change_autoneg = true;
 					phydev->autoneg = AUTONEG_ENABLE;

drivers/net/phy/phy_device.c

@@ -3021,15 +3021,14 @@ static int phy_probe(struct device *dev)
 	 * a controller will attach, and may modify one
 	 * or both of these values
 	 */
-	if (phydrv->features) {
+	if (phydrv->features)
 		linkmode_copy(phydev->supported, phydrv->features);
-	} else if (phydrv->get_features) {
+	else if (phydrv->get_features)
 		err = phydrv->get_features(phydev);
-	} else if (phydev->is_c45) {
+	else if (phydev->is_c45)
 		err = genphy_c45_pma_read_abilities(phydev);
-	} else {
+	else
 		err = genphy_read_abilities(phydev);
-	}
 
 	if (err)
 		goto out;

drivers/net/phy/phylink.c

@@ -182,7 +182,8 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 			pl->link_config.duplex = DUPLEX_FULL;
 
 		/* We treat the "pause" and "asym-pause" terminology as
-		 * defining the link partner's ability. */
+		 * defining the link partner's ability.
+		 */
 		if (fwnode_property_read_bool(fixed_node, "pause"))
 			__set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
 				  pl->link_config.lp_advertising);
@@ -685,7 +686,8 @@ static void phylink_resolve(struct work_struct *w)
 			phylink_mac_pcs_get_state(pl, &link_state);
 
 			/* If we have a phy, the "up" state is the union of
-			 * both the PHY and the MAC */
+			 * both the PHY and the MAC
+			 */
 			if (pl->phydev)
 				link_state.link &= pl->phy_state.link;
 
@@ -694,7 +696,8 @@ static void phylink_resolve(struct work_struct *w)
 				link_state.interface = pl->phy_state.interface;
 
 				/* If we have a PHY, we need to update with
-				 * the PHY flow control bits. */
+				 * the PHY flow control bits.
+				 */
 				link_state.pause = pl->phy_state.pause;
 				mac_config = true;
 			}
@@ -1380,11 +1383,10 @@ int phylink_ethtool_ksettings_get(struct phylink *pl,
 
 	ASSERT_RTNL();
 
-	if (pl->phydev) {
+	if (pl->phydev)
 		phy_ethtool_ksettings_get(pl->phydev, kset);
-	} else {
+	else
 		kset->base.port = pl->link_port;
-	}
 
 	linkmode_copy(kset->link_modes.supported, pl->supported);
 

drivers/net/phy/qsemi.c

@@ -100,6 +100,7 @@ static int qs6612_ack_interrupt(struct phy_device *phydev)
 static int qs6612_config_intr(struct phy_device *phydev)
 {
 	int err;
+
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		/* clear any interrupts before enabling them */
 		err = qs6612_ack_interrupt(phydev);

drivers/net/phy/sfp-bus.c

@@ -629,14 +629,14 @@ static void sfp_upstream_clear(struct sfp_bus *bus)
  * be put via sfp_bus_put() when done.
  *
  * Returns:
- * 	    - on success, a pointer to the sfp_bus structure,
- *	    - %NULL if no SFP is specified,
- * 	    - on failure, an error pointer value:
+ *	- on success, a pointer to the sfp_bus structure,
+ *	- %NULL if no SFP is specified,
+ *	- on failure, an error pointer value:
  *
- * 	      - corresponding to the errors detailed for
- * 	        fwnode_property_get_reference_args().
- * 	      - %-ENOMEM if we failed to allocate the bus.
- *	      - an error from the upstream's connect_phy() method.
+ *	- corresponding to the errors detailed for
+ *	  fwnode_property_get_reference_args().
+ *	- %-ENOMEM if we failed to allocate the bus.
+ *	- an error from the upstream's connect_phy() method.
  */
 struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
 {
@@ -671,14 +671,14 @@ EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
  * bus, so it is safe to put the bus after this call.
  *
  * Returns:
- * 	    - on success, a pointer to the sfp_bus structure,
- *	    - %NULL if no SFP is specified,
- * 	    - on failure, an error pointer value:
+ *	- on success, a pointer to the sfp_bus structure,
+ *	- %NULL if no SFP is specified,
+ *	- on failure, an error pointer value:
  *
- * 	      - corresponding to the errors detailed for
- * 	        fwnode_property_get_reference_args().
- * 	      - %-ENOMEM if we failed to allocate the bus.
- *	      - an error from the upstream's connect_phy() method.
+ *	- corresponding to the errors detailed for
+ *	  fwnode_property_get_reference_args().
+ *	- %-ENOMEM if we failed to allocate the bus.
+ *	- an error from the upstream's connect_phy() method.
  */
 int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
 			 const struct sfp_upstream_ops *ops)

drivers/net/phy/sfp.c

@@ -2153,7 +2153,7 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
 
 	case SFP_S_INIT:
 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
-			/* TX_FAULT is still asserted after t_init or
+			/* TX_FAULT is still asserted after t_init
 			 * or t_start_up, so assume there is a fault.
 			 */
 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,

drivers/net/phy/spi_ks8995.c

@@ -160,11 +160,11 @@ static const struct spi_device_id ks8995_id[] = {
 MODULE_DEVICE_TABLE(spi, ks8995_id);
 
 static const struct of_device_id ks8895_spi_of_match[] = {
-        { .compatible = "micrel,ks8995" },
-        { .compatible = "micrel,ksz8864" },
-        { .compatible = "micrel,ksz8795" },
-        { },
- };
+	{ .compatible = "micrel,ks8995" },
+	{ .compatible = "micrel,ksz8864" },
+	{ .compatible = "micrel,ksz8795" },
+	{ },
+};
 MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
 
 static inline u8 get_chip_id(u8 val)

drivers/net/phy/ste10Xp.c

@@ -20,12 +20,12 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 
-#define MII_XCIIS   	0x11	/* Configuration Info IRQ & Status Reg */
-#define MII_XIE     	0x12	/* Interrupt Enable Register */
+#define MII_XCIIS	0x11	/* Configuration Info IRQ & Status Reg */
+#define MII_XIE		0x12	/* Interrupt Enable Register */
 #define MII_XIE_DEFAULT_MASK 0x0070 /* ANE complete, Remote Fault, Link Down */
 
 #define STE101P_PHY_ID		0x00061c50
-#define STE100P_PHY_ID       	0x1c040011
+#define STE100P_PHY_ID		0x1c040011
 
 static int ste10Xp_config_init(struct phy_device *phydev)
 {

drivers/net/phy/vitesse.c

@@ -249,7 +249,8 @@ static int vsc73xx_config_aneg(struct phy_device *phydev)
 
 /* This adds a skew for both TX and RX clocks, so the skew should only be
  * applied to "rgmii-id" interfaces. It may not work as expected
- * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */
+ * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.
+ */
 static int vsc8601_add_skew(struct phy_device *phydev)
 {
 	int ret;