OMAP4: PM: TWL6030: fix ON/RET/OFF voltages

According to latest OMAP4430 Data Manual v0.4 dated March 2011:
 - Retention voltage shall be set to 0.83V. See tables 2.2, 2.4 and 2.6 in DM.
   This allows saving a little more power in retention states.
 - OPP100 IVA nominal voltage is 1.188V. See table 2.4 in DM.
   This allows saving a little power when CPU wakes up until Smart-Reflex is
   not yet resumed.

[nm@ti.com: ported to voltdm_c]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Patrick Titiano <p-titiano@ti.com>

arch/arm/mach-omap2/omap_twl.c

@@ -197,10 +197,10 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
 static struct omap_voltdm_pmic omap4_mpu_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1350000,
-	.onlp_volt		= 1350000,
-	.ret_volt		= 837500,
-	.off_volt		= 600000,
+	.on_volt		= 1375000,
+	.onlp_volt		= 1375000,
+	.ret_volt		= 830000,
+	.off_volt		= 0,
 	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -218,10 +218,10 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
 static struct omap_voltdm_pmic omap4_iva_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1100000,
-	.onlp_volt		= 1100000,
-	.ret_volt		= 837500,
-	.off_volt		= 600000,
+	.on_volt		= 1188000,
+	.onlp_volt		= 1188000,
+	.ret_volt		= 830000,
+	.off_volt		= 0,
 	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -239,10 +239,10 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
 static struct omap_voltdm_pmic omap4_core_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1100000,
-	.onlp_volt		= 1100000,
-	.ret_volt		= 837500,
-	.off_volt		= 600000,
+	.on_volt		= 1200000,
+	.onlp_volt		= 1200000,
+	.ret_volt		= 830000,
+	.off_volt		= 0,
 	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,