Merge branches 'for-3.12/devm', 'for-3.12/i2c-hid', 'for-3.12/i2c-hid-dt',...

Merge branches 'for-3.12/devm', 'for-3.12/i2c-hid', 'for-3.12/i2c-hid-dt', 'for-3.12/logitech', 'for-3.12/multitouch-win8', 'for-3.12/trasnport-driver-cleanup', 'for-3.12/uhid', 'for-3.12/upstream' and 'for-3.12/wiimote' into for-linus

Documentation/devicetree/bindings/hid/hid-over-i2c.txt

+* HID over I2C Device-Tree bindings
+
+HID over I2C provides support for various Human Interface Devices over the
+I2C bus. These devices can be for example touchpads, keyboards, touch screens
+or sensors.
+
+The specification has been written by Microsoft and is currently available here:
+http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+If this binding is used, the kernel module i2c-hid will handle the communication
+with the device and the generic hid core layer will handle the protocol.
+
+Required properties:
+- compatible: must be "hid-over-i2c"
+- reg: i2c slave address
+- hid-descr-addr: HID descriptor address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: interrupt line
+
+Example:
+
+	i2c-hid-dev@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <3 2>;
+	};

Documentation/hid/uhid.txt

@@ -149,11 +149,13 @@ needs. Only UHID_OUTPUT and UHID_OUTPUT_EV have payloads.
   is of type "struct uhid_data_req".
   This may be received even though you haven't received UHID_OPEN, yet.
 
-  UHID_OUTPUT_EV:
+  UHID_OUTPUT_EV (obsolete):
   Same as UHID_OUTPUT but this contains a "struct input_event" as payload. This
   is called for force-feedback, LED or similar events which are received through
   an input device by the HID subsystem. You should convert this into raw reports
   and send them to your device similar to events of type UHID_OUTPUT.
+  This is no longer sent by newer kernels. Instead, HID core converts it into a
+  raw output report and sends it via UHID_OUTPUT.
 
   UHID_FEATURE:
   This event is sent if the kernel driver wants to perform a feature request as

Documentation/input/gamepad.txt

+                            Linux Gamepad API
+----------------------------------------------------------------------------
+
+1. Intro
+~~~~~~~~
+Linux provides many different input drivers for gamepad hardware. To avoid
+having user-space deal with different button-mappings for each gamepad, this
+document defines how gamepads are supposed to report their data.
+
+2. Geometry
+~~~~~~~~~~~
+As "gamepad" we define devices which roughly look like this:
+
+            ____________________________              __
+           / [__ZL__]          [__ZR__] \               |
+          / [__ TL __]        [__ TR __] \              | Front Triggers
+       __/________________________________\__         __|
+      /                                  _   \          |
+     /      /\           __             (N)   \         |
+    /       ||      __  |MO|  __     _       _ \        | Main Pad
+   |    <===DP===> |SE|      |ST|   (W) -|- (E) |       |
+    \       ||    ___          ___       _     /        |
+    /\      \/   /   \        /   \     (S)   /\      __|
+   /  \________ | LS  | ____ |  RS | ________/  \       |
+  |         /  \ \___/ /    \ \___/ /  \         |      | Control Sticks
+  |        /    \_____/      \_____/    \        |    __|
+  |       /                              \       |
+   \_____/                                \_____/
+
+       |________|______|    |______|___________|
+         D-Pad    Left       Right   Action Pad
+                 Stick       Stick
+
+                   |_____________|
+                      Menu Pad
+
+Most gamepads have the following features:
+  - Action-Pad
+    4 buttons in diamonds-shape (on the right side). The buttons are
+    differently labeled on most devices so we define them as NORTH,
+    SOUTH, WEST and EAST.
+  - D-Pad (Direction-pad)
+    4 buttons (on the left side) that point up, down, left and right.
+  - Menu-Pad
+    Different constellations, but most-times 2 buttons: SELECT - START
+    Furthermore, many gamepads have a fancy branded button that is used as
+    special system-button. It often looks different to the other buttons and
+    is used to pop up system-menus or system-settings.
+  - Analog-Sticks
+    Analog-sticks provide freely moveable sticks to control directions. Not
+    all devices have both or any, but they are present at most times.
+    Analog-sticks may also provide a digital button if you press them.
+  - Triggers
+    Triggers are located on the upper-side of the pad in vertical direction.
+    Not all devices provide them, but the upper buttons are normally named
+    Left- and Right-Triggers, the lower buttons Z-Left and Z-Right.
+  - Rumble
+    Many devices provide force-feedback features. But are mostly just
+    simple rumble motors.
+
+3. Detection
+~~~~~~~~~~~~
+All gamepads that follow the protocol described here map BTN_GAMEPAD. This is
+an alias for BTN_SOUTH/BTN_A. It can be used to identify a gamepad as such.
+However, not all gamepads provide all features, so you need to test for all
+features that you need, first. How each feature is mapped is described below.
+
+Legacy drivers often don't comply to these rules. As we cannot change them
+for backwards-compatibility reasons, you need to provide fixup mappings in
+user-space yourself. Some of them might also provide module-options that
+change the mappings so you can adivce users to set these.
+
+All new gamepads are supposed to comply with this mapping. Please report any
+bugs, if they don't.
+
+There are a lot of less-featured/less-powerful devices out there, which re-use
+the buttons from this protocol. However, they try to do this in a compatible
+fashion. For example, the "Nintendo Wii Nunchuk" provides two trigger buttons
+and one analog stick. It reports them as if it were a gamepad with only one
+analog stick and two trigger buttons on the right side.
+But that means, that if you only support "real" gamepads, you must test
+devices for _all_ reported events that you need. Otherwise, you will also get
+devices that report a small subset of the events.
+
+No other devices, that do not look/feel like a gamepad, shall report these
+events.
+
+4. Events
+~~~~~~~~~
+Gamepads report the following events:
+
+Action-Pad:
+  Every gamepad device has at least 2 action buttons. This means, that every
+  device reports BTN_SOUTH (which BTN_GAMEPAD is an alias for). Regardless
+  of the labels on the buttons, the codes are sent according to the
+  physical position of the buttons.
+  Please note that 2- and 3-button pads are fairly rare and old. You might
+  want to filter gamepads that do not report all four.
+    2-Button Pad:
+      If only 2 action-buttons are present, they are reported as BTN_SOUTH and
+      BTN_EAST. For vertical layouts, the upper button is BTN_EAST. For
+      horizontal layouts, the button more on the right is BTN_EAST.
+    3-Button Pad:
+      If only 3 action-buttons are present, they are reported as (from left
+      to right): BTN_WEST, BTN_SOUTH, BTN_EAST
+      If the buttons are aligned perfectly vertically, they are reported as
+      (from top down): BTN_WEST, BTN_SOUTH, BTN_EAST
+    4-Button Pad:
+      If all 4 action-buttons are present, they can be aligned in two
+      different formations. If diamond-shaped, they are reported as BTN_NORTH,
+      BTN_WEST, BTN_SOUTH, BTN_EAST according to their physical location.
+      If rectangular-shaped, the upper-left button is BTN_NORTH, lower-left
+      is BTN_WEST, lower-right is BTN_SOUTH and upper-right is BTN_EAST.
+
+D-Pad:
+  Every gamepad provides a D-Pad with four directions: Up, Down, Left, Right
+  Some of these are available as digital buttons, some as analog buttons. Some
+  may even report both. The kernel does not convert between these so
+  applications should support both and choose what is more appropriate if
+  both are reported.
+    Digital buttons are reported as:
+      BTN_DPAD_*
+    Analog buttons are reported as:
+      ABS_HAT0X and ABS_HAT0Y
+
+Analog-Sticks:
+  The left analog-stick is reported as ABS_X, ABS_Y. The right analog stick is
+  reported as ABS_RX, ABS_RY. Zero, one or two sticks may be present.
+  If analog-sticks provide digital buttons, they are mapped accordingly as
+  BTN_THUMBL (first/left) and BTN_THUMBR (second/right).
+
+Triggers:
+  Trigger buttons can be available as digital or analog buttons or both. User-
+  space must correctly deal with any situation and choose the most appropriate
+  mode.
+  Upper trigger buttons are reported as BTN_TR or ABS_HAT1X (right) and BTN_TL
+  or ABS_HAT1Y (left). Lower trigger buttons are reported as BTN_TR2 or
+  ABS_HAT2X (right/ZR) and BTN_TL2 or ABS_HAT2Y (left/ZL).
+  If only one trigger-button combination is present (upper+lower), they are
+  reported as "right" triggers (BTN_TR/ABS_HAT1X).
+
+Menu-Pad:
+  Menu buttons are always digital and are mapped according to their location
+  instead of their labels. That is:
+    1-button Pad: Mapped as BTN_START
+    2-button Pad: Left button mapped as BTN_SELECT, right button mapped as
+                  BTN_START
+  Many pads also have a third button which is branded or has a special symbol
+  and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo
+  "HOME" button, the XBox "X"-button or Sony "P" button.
+
+Rumble:
+  Rumble is adverticed as FF_RUMBLE.
+
+----------------------------------------------------------------------------
+  Written 2013 by David Herrmann <dh.herrmann@gmail.com>

MAINTAINERS

@@ -6921,6 +6921,14 @@ M:	Maxim Levitsky <maximlevitsky@gmail.com>
 S:	Maintained
 F:	drivers/memstick/host/r592.*
 
+ROCCAT DRIVERS
+M:	Stefan Achatz <erazor_de@users.sourceforge.net>
+W:	http://sourceforge.net/projects/roccat/
+S:	Maintained
+F:	drivers/hid/hid-roccat*
+F:	include/linux/hid-roccat*
+F:	Documentation/ABI/*/sysfs-driver-hid-roccat*
+
 ROCKETPORT DRIVER
 P:	Comtrol Corp.
 W:	http://www.comtrol.com

drivers/hid/Kconfig

@@ -743,6 +743,14 @@ config HID_WIIMOTE
 	To compile this driver as a module, choose M here: the
 	module will be called hid-wiimote.
 
+config HID_XINMO
+	tristate "Xin-Mo non-fully compliant devices"
+	depends on HID
+	---help---
+	Support for Xin-Mo devices that are not fully compliant with the HID
+	standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
+	if you have a Xin-Mo Dual Arcade controller.
+
 config HID_ZEROPLUS
 	tristate "Zeroplus based game controller support"
 	depends on HID

drivers/hid/Makefile

@@ -110,6 +110,7 @@ obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
 obj-$(CONFIG_HID_UCLOGIC)	+= hid-uclogic.o
+obj-$(CONFIG_HID_XINMO)		+= hid-xinmo.o
 obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o
 obj-$(CONFIG_HID_ZYDACRON)	+= hid-zydacron.o
 obj-$(CONFIG_HID_WACOM)		+= hid-wacom.o

drivers/hid/hid-a4tech.c

@@ -90,11 +90,10 @@ static int a4_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	struct a4tech_sc *a4;
 	int ret;
 
-	a4 = kzalloc(sizeof(*a4), GFP_KERNEL);
+	a4 = devm_kzalloc(&hdev->dev, sizeof(*a4), GFP_KERNEL);
 	if (a4 == NULL) {
 		hid_err(hdev, "can't alloc device descriptor\n");
-		ret = -ENOMEM;
-		goto err_free;
+		return -ENOMEM;
 	}
 
 	a4->quirks = id->driver_data;
@@ -104,27 +103,16 @@ static int a4_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "parse failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	return 0;
-err_free:
-	kfree(a4);
-	return ret;
-}
-
-static void a4_remove(struct hid_device *hdev)
-{
-	struct a4tech_sc *a4 = hid_get_drvdata(hdev);
-
-	hid_hw_stop(hdev);
-	kfree(a4);
 }
 
 static const struct hid_device_id a4_devices[] = {
@@ -144,7 +132,6 @@ static struct hid_driver a4_driver = {
 	.input_mapped = a4_input_mapped,
 	.event = a4_event,
 	.probe = a4_probe,
-	.remove = a4_remove,
 };
 module_hid_driver(a4_driver);
 

drivers/hid/hid-apple.c

@@ -349,7 +349,7 @@ static int apple_probe(struct hid_device *hdev,
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
 	int ret;
 
-	asc = kzalloc(sizeof(*asc), GFP_KERNEL);
+	asc = devm_kzalloc(&hdev->dev, sizeof(*asc), GFP_KERNEL);
 	if (asc == NULL) {
 		hid_err(hdev, "can't alloc apple descriptor\n");
 		return -ENOMEM;
@@ -362,7 +362,7 @@ static int apple_probe(struct hid_device *hdev,
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "parse failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	if (quirks & APPLE_HIDDEV)
@@ -373,19 +373,10 @@ static int apple_probe(struct hid_device *hdev,
 	ret = hid_hw_start(hdev, connect_mask);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	return 0;
-err_free:
-	kfree(asc);
-	return ret;
-}
-
-static void apple_remove(struct hid_device *hdev)
-{
-	hid_hw_stop(hdev);
-	kfree(hid_get_drvdata(hdev));
 }
 
 static const struct hid_device_id apple_devices[] = {
@@ -551,7 +542,6 @@ static struct hid_driver apple_driver = {
 	.id_table = apple_devices,
 	.report_fixup = apple_report_fixup,
 	.probe = apple_probe,
-	.remove = apple_remove,
 	.event = apple_event,
 	.input_mapping = apple_input_mapping,
 	.input_mapped = apple_input_mapped,

drivers/hid/hid-core.c

@@ -63,6 +63,8 @@ struct hid_report *hid_register_report(struct hid_device *device, unsigned type,
 	struct hid_report_enum *report_enum = device->report_enum + type;
 	struct hid_report *report;
 
+	if (id >= HID_MAX_IDS)
+		return NULL;
 	if (report_enum->report_id_hash[id])
 		return report_enum->report_id_hash[id];
 
@@ -404,8 +406,10 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 
 	case HID_GLOBAL_ITEM_TAG_REPORT_ID:
 		parser->global.report_id = item_udata(item);
-		if (parser->global.report_id == 0) {
-			hid_err(parser->device, "report_id 0 is invalid\n");
+		if (parser->global.report_id == 0 ||
+		    parser->global.report_id >= HID_MAX_IDS) {
+			hid_err(parser->device, "report_id %u is invalid\n",
+				parser->global.report_id);
 			return -1;
 		}
 		return 0;
@@ -450,7 +454,7 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 			}
 			parser->local.delimiter_depth--;
 		}
-		return 1;
+		return 0;
 
 	case HID_LOCAL_ITEM_TAG_USAGE:
 
@@ -575,7 +579,7 @@ static void hid_close_report(struct hid_device *device)
 	for (i = 0; i < HID_REPORT_TYPES; i++) {
 		struct hid_report_enum *report_enum = device->report_enum + i;
 
-		for (j = 0; j < 256; j++) {
+		for (j = 0; j < HID_MAX_IDS; j++) {
 			struct hid_report *report = report_enum->report_id_hash[j];
 			if (report)
 				hid_free_report(report);
@@ -677,12 +681,61 @@ static u8 *fetch_item(__u8 *start, __u8 *end, struct hid_item *item)
 	return NULL;
 }
 
-static void hid_scan_usage(struct hid_device *hid, u32 usage)
+static void hid_scan_input_usage(struct hid_parser *parser, u32 usage)
 {
+	struct hid_device *hid = parser->device;
+
 	if (usage == HID_DG_CONTACTID)
 		hid->group = HID_GROUP_MULTITOUCH;
 }
 
+static void hid_scan_feature_usage(struct hid_parser *parser, u32 usage)
+{
+	if (usage == 0xff0000c5 && parser->global.report_count == 256 &&
+	    parser->global.report_size == 8)
+		parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
+}
+
+static void hid_scan_collection(struct hid_parser *parser, unsigned type)
+{
+	struct hid_device *hid = parser->device;
+
+	if (((parser->global.usage_page << 16) == HID_UP_SENSOR) &&
+	    type == HID_COLLECTION_PHYSICAL)
+		hid->group = HID_GROUP_SENSOR_HUB;
+}
+
+static int hid_scan_main(struct hid_parser *parser, struct hid_item *item)
+{
+	__u32 data;
+	int i;
+
+	data = item_udata(item);
+
+	switch (item->tag) {
+	case HID_MAIN_ITEM_TAG_BEGIN_COLLECTION:
+		hid_scan_collection(parser, data & 0xff);
+		break;
+	case HID_MAIN_ITEM_TAG_END_COLLECTION:
+		break;
+	case HID_MAIN_ITEM_TAG_INPUT:
+		for (i = 0; i < parser->local.usage_index; i++)
+			hid_scan_input_usage(parser, parser->local.usage[i]);
+		break;
+	case HID_MAIN_ITEM_TAG_OUTPUT:
+		break;
+	case HID_MAIN_ITEM_TAG_FEATURE:
+		for (i = 0; i < parser->local.usage_index; i++)
+			hid_scan_feature_usage(parser, parser->local.usage[i]);
+		break;
+	}
+
+	/* Reset the local parser environment */
+	memset(&parser->local, 0, sizeof(parser->local));
+
+	return 0;
+}
+
 /*
  * Scan a report descriptor before the device is added to the bus.
  * Sets device groups and other properties that determine what driver
@@ -690,48 +743,41 @@ static void hid_scan_usage(struct hid_device *hid, u32 usage)
  */
 static int hid_scan_report(struct hid_device *hid)
 {
-	unsigned int page = 0, delim = 0;
+	struct hid_parser *parser;
+	struct hid_item item;
 	__u8 *start = hid->dev_rdesc;
 	__u8 *end = start + hid->dev_rsize;
-	unsigned int u, u_min = 0, u_max = 0;
-	struct hid_item item;
+	static int (*dispatch_type[])(struct hid_parser *parser,
+				      struct hid_item *item) = {
+		hid_scan_main,
+		hid_parser_global,
+		hid_parser_local,
+		hid_parser_reserved
+	};
+
+	parser = vzalloc(sizeof(struct hid_parser));
+	if (!parser)
+		return -ENOMEM;
 
+	parser->device = hid;
 	hid->group = HID_GROUP_GENERIC;
-	while ((start = fetch_item(start, end, &item)) != NULL) {
-		if (item.format != HID_ITEM_FORMAT_SHORT)
-			return -EINVAL;
-		if (item.type == HID_ITEM_TYPE_GLOBAL) {
-			if (item.tag == HID_GLOBAL_ITEM_TAG_USAGE_PAGE)
-				page = item_udata(&item) << 16;
-		} else if (item.type == HID_ITEM_TYPE_LOCAL) {
-			if (delim > 1)
-				break;
-			u = item_udata(&item);
-			if (item.size <= 2)
-				u += page;
-			switch (item.tag) {
-			case HID_LOCAL_ITEM_TAG_DELIMITER:
-				delim += !!u;
-				break;
-			case HID_LOCAL_ITEM_TAG_USAGE:
-				hid_scan_usage(hid, u);
-				break;
-			case HID_LOCAL_ITEM_TAG_USAGE_MINIMUM:
-				u_min = u;
-				break;
-			case HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM:
-				u_max = u;
-				for (u = u_min; u <= u_max; u++)
-					hid_scan_usage(hid, u);
-				break;
-			}
-		} else if (page == HID_UP_SENSOR &&
-			item.type == HID_ITEM_TYPE_MAIN &&
-			item.tag == HID_MAIN_ITEM_TAG_BEGIN_COLLECTION &&
-			(item_udata(&item) & 0xff) == HID_COLLECTION_PHYSICAL)
-			hid->group = HID_GROUP_SENSOR_HUB;
-	}
 
+	/*
+	 * The parsing is simpler than the one in hid_open_report() as we should
+	 * be robust against hid errors. Those errors will be raised by
+	 * hid_open_report() anyway.
+	 */
+	while ((start = fetch_item(start, end, &item)) != NULL)
+		dispatch_type[item.type](parser, &item);
+
+	/*
+	 * Handle special flags set during scanning.
+	 */
+	if ((parser->scan_flags & HID_SCAN_FLAG_MT_WIN_8) &&
+	    (hid->group == HID_GROUP_MULTITOUCH))
+		hid->group = HID_GROUP_MULTITOUCH_WIN_8;
+
+	vfree(parser);
 	return 0;
 }
 
@@ -1128,7 +1174,8 @@ static void hid_output_field(const struct hid_device *hid,
 }
 
 /*
- * Create a report.
+ * Create a report. 'data' has to be allocated using
+ * hid_alloc_report_buf() so that it has proper size.
  */
 
 void hid_output_report(struct hid_report *report, __u8 *data)
@@ -1144,6 +1191,22 @@ void hid_output_report(struct hid_report *report, __u8 *data)
 }
 EXPORT_SYMBOL_GPL(hid_output_report);
 
+/*
+ * Allocator for buffer that is going to be passed to hid_output_report()
+ */
+u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags)
+{
+	/*
+	 * 7 extra bytes are necessary to achieve proper functionality
+	 * of implement() working on 8 byte chunks
+	 */
+
+	int len = ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7;
+
+	return kmalloc(len, flags);
+}
+EXPORT_SYMBOL_GPL(hid_alloc_report_buf);
+
 /*
  * Set a field value. The report this field belongs to has to be
  * created and transferred to the device, to set this value in the
@@ -1152,7 +1215,12 @@ EXPORT_SYMBOL_GPL(hid_output_report);
 
 int hid_set_field(struct hid_field *field, unsigned offset, __s32 value)
 {
-	unsigned size = field->report_size;
+	unsigned size;
+
+	if (!field)
+		return -1;
+
+	size = field->report_size;
 
 	hid_dump_input(field->report->device, field->usage + offset, value);
 
@@ -1597,6 +1665,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
@@ -1679,6 +1748,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPURE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPURE_OPTICAL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_LUA) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
@@ -1736,6 +1806,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },

drivers/hid/hid-holtekff.c

@@ -98,7 +98,7 @@ static void holtekff_send(struct holtekff_device *holtekff,
 		holtekff->field->value[i] = data[i];
 	}
 
-	dbg_hid("sending %*ph\n", 7, data);
+	dbg_hid("sending %7ph\n", data);
 
 	hid_hw_request(hid, holtekff->field->report, HID_REQ_SET_REPORT);
 }

drivers/hid/hid-ids.h

@@ -135,9 +135,9 @@
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI  0x0255
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO   0x0256
-#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
-#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
-#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0290
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0292
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_IRCONTROL	0x8240
@@ -482,6 +482,7 @@
 #define USB_VENDOR_ID_KYE		0x0458
 #define USB_DEVICE_ID_KYE_ERGO_525V	0x0087
 #define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE	0x0138
+#define USB_DEVICE_ID_GENIUS_GX_IMPERATOR	0x4018
 #define USB_DEVICE_ID_KYE_GPEN_560	0x5003
 #define USB_DEVICE_ID_KYE_EASYPEN_I405X	0x5010
 #define USB_DEVICE_ID_KYE_MOUSEPEN_I608X	0x5011
@@ -658,6 +659,7 @@
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16   0x0012
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17   0x0013
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18   0x0014
+#define USB_DEVICE_ID_NTRIG_DUOSENSE 0x1500
 
 #define USB_VENDOR_ID_ONTRAK		0x0a07
 #define USB_DEVICE_ID_ONTRAK_ADU100	0x0064
@@ -716,6 +718,7 @@
 #define USB_DEVICE_ID_ROCCAT_KONE	0x2ced
 #define USB_DEVICE_ID_ROCCAT_KONEPLUS	0x2d51
 #define USB_DEVICE_ID_ROCCAT_KONEPURE	0x2dbe
+#define USB_DEVICE_ID_ROCCAT_KONEPURE_OPTICAL	0x2db4
 #define USB_DEVICE_ID_ROCCAT_KONEXTD	0x2e22
 #define USB_DEVICE_ID_ROCCAT_KOVAPLUS	0x2d50
 #define USB_DEVICE_ID_ROCCAT_LUA	0x2c2e
@@ -887,6 +890,9 @@
 #define USB_VENDOR_ID_XAT	0x2505
 #define USB_DEVICE_ID_XAT_CSR	0x0220
 
+#define USB_VENDOR_ID_XIN_MO			0x16c0
+#define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE	0x05e1
+
 #define USB_VENDOR_ID_XIROKU		0x1477
 #define USB_DEVICE_ID_XIROKU_SPX	0x1006
 #define USB_DEVICE_ID_XIROKU_MPX	0x1007

drivers/hid/hid-input.c

@@ -340,7 +340,7 @@ static int hidinput_get_battery_property(struct power_supply *psy,
 {
 	struct hid_device *dev = container_of(psy, struct hid_device, battery);
 	int ret = 0;
-	__u8 buf[2] = {};
+	__u8 *buf;
 
 	switch (prop) {
 	case POWER_SUPPLY_PROP_PRESENT:
@@ -349,12 +349,19 @@ static int hidinput_get_battery_property(struct power_supply *psy,
 		break;
 
 	case POWER_SUPPLY_PROP_CAPACITY:
+
+		buf = kmalloc(2 * sizeof(__u8), GFP_KERNEL);
+		if (!buf) {
+			ret = -ENOMEM;
+			break;
+		}
 		ret = dev->hid_get_raw_report(dev, dev->battery_report_id,
-					      buf, sizeof(buf),
+					      buf, 2,
 					      dev->battery_report_type);
 
 		if (ret != 2) {
 			ret = -ENODATA;
+			kfree(buf);
 			break;
 		}
 		ret = 0;
@@ -364,6 +371,7 @@ static int hidinput_get_battery_property(struct power_supply *psy,
 		    buf[1] <= dev->battery_max)
 			val->intval = (100 * (buf[1] - dev->battery_min)) /
 				(dev->battery_max - dev->battery_min);
+		kfree(buf);
 		break;
 
 	case POWER_SUPPLY_PROP_MODEL_NAME:
@@ -1137,6 +1145,74 @@ unsigned int hidinput_count_leds(struct hid_device *hid)
 }
 EXPORT_SYMBOL_GPL(hidinput_count_leds);
 
+static void hidinput_led_worker(struct work_struct *work)
+{
+	struct hid_device *hid = container_of(work, struct hid_device,
+					      led_work);
+	struct hid_field *field;
+	struct hid_report *report;
+	int len;
+	__u8 *buf;
+
+	field = hidinput_get_led_field(hid);
+	if (!field)
+		return;
+
+	/*
+	 * field->report is accessed unlocked regarding HID core. So there might
+	 * be another incoming SET-LED request from user-space, which changes
+	 * the LED state while we assemble our outgoing buffer. However, this
+	 * doesn't matter as hid_output_report() correctly converts it into a
+	 * boolean value no matter what information is currently set on the LED
+	 * field (even garbage). So the remote device will always get a valid
+	 * request.
+	 * And in case we send a wrong value, a next led worker is spawned
+	 * for every SET-LED request so the following worker will send the
+	 * correct value, guaranteed!
+	 */
+
+	report = field->report;
+
+	/* use custom SET_REPORT request if possible (asynchronous) */
+	if (hid->ll_driver->request)
+		return hid->ll_driver->request(hid, report, HID_REQ_SET_REPORT);
+
+	/* fall back to generic raw-output-report */
+	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	hid_output_report(report, buf);
+	/* synchronous output report */
+	hid->hid_output_raw_report(hid, buf, len, HID_OUTPUT_REPORT);
+	kfree(buf);
+}
+
+static int hidinput_input_event(struct input_dev *dev, unsigned int type,
+				unsigned int code, int value)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct hid_field *field;
+	int offset;
+
+	if (type == EV_FF)
+		return input_ff_event(dev, type, code, value);
+
+	if (type != EV_LED)
+		return -1;
+
+	if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
+		hid_warn(dev, "event field not found\n");
+		return -1;
+	}
+
+	hid_set_field(field, offset, value);
+
+	schedule_work(&hid->led_work);
+	return 0;
+}
+
 static int hidinput_open(struct input_dev *dev)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
@@ -1183,7 +1259,10 @@ static struct hid_input *hidinput_allocate(struct hid_device *hid)
 	}
 
 	input_set_drvdata(input_dev, hid);
-	input_dev->event = hid->ll_driver->hidinput_input_event;
+	if (hid->ll_driver->hidinput_input_event)
+		input_dev->event = hid->ll_driver->hidinput_input_event;
+	else if (hid->ll_driver->request || hid->hid_output_raw_report)
+		input_dev->event = hidinput_input_event;
 	input_dev->open = hidinput_open;
 	input_dev->close = hidinput_close;
 	input_dev->setkeycode = hidinput_setkeycode;
@@ -1278,6 +1357,7 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 	int i, j, k;
 
 	INIT_LIST_HEAD(&hid->inputs);
+	INIT_WORK(&hid->led_work, hidinput_led_worker);
 
 	if (!force) {
 		for (i = 0; i < hid->maxcollection; i++) {
@@ -1379,6 +1459,12 @@ void hidinput_disconnect(struct hid_device *hid)
 		input_unregister_device(hidinput->input);
 		kfree(hidinput);
 	}
+
+	/* led_work is spawned by input_dev callbacks, but doesn't access the
+	 * parent input_dev at all. Once all input devices are removed, we
+	 * know that led_work will never get restarted, so we can cancel it
+	 * synchronously and are safe. */
+	cancel_work_sync(&hid->led_work);
 }
 EXPORT_SYMBOL_GPL(hidinput_disconnect);
 

drivers/hid/hid-kye.c

@@ -268,6 +268,26 @@ static __u8 easypen_m610x_rdesc_fixed[] = {
 	0xC0                          /*  End Collection                  */
 };
 
+static __u8 *kye_consumer_control_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize, int offset, const char *device_name) {
+	/*
+	 * the fixup that need to be done:
+	 *   - change Usage Maximum in the Comsumer Control
+	 *     (report ID 3) to a reasonable value
+	 */
+	if (*rsize >= offset + 31 &&
+	    /* Usage Page (Consumer Devices) */
+	    rdesc[offset] == 0x05 && rdesc[offset + 1] == 0x0c &&
+	    /* Usage (Consumer Control) */
+	    rdesc[offset + 2] == 0x09 && rdesc[offset + 3] == 0x01 &&
+	    /*   Usage Maximum > 12287 */
+	    rdesc[offset + 10] == 0x2a && rdesc[offset + 12] > 0x2f) {
+		hid_info(hdev, "fixing up %s report descriptor\n", device_name);
+		rdesc[offset + 12] = 0x2f;
+	}
+	return rdesc;
+}
+
 static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
@@ -315,23 +335,12 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		}
 		break;
 	case USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE:
-		/*
-		 * the fixup that need to be done:
-		 *   - change Usage Maximum in the Comsumer Control
-		 *     (report ID 3) to a reasonable value
-		 */
-		if (*rsize >= 135 &&
-			/* Usage Page (Consumer Devices) */
-			rdesc[104] == 0x05 && rdesc[105] == 0x0c &&
-			/* Usage (Consumer Control) */
-			rdesc[106] == 0x09 && rdesc[107] == 0x01 &&
-			/*   Usage Maximum > 12287 */
-			rdesc[114] == 0x2a && rdesc[116] > 0x2f) {
-			hid_info(hdev,
-				 "fixing up Genius Gila Gaming Mouse "
-				 "report descriptor\n");
-			rdesc[116] = 0x2f;
-		}
+		rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104,
+					"Genius Gila Gaming Mouse");
+		break;
+	case USB_DEVICE_ID_GENIUS_GX_IMPERATOR:
+		rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83,
+					"Genius Gx Imperator Keyboard");
 		break;
 	}
 	return rdesc;
@@ -428,6 +437,8 @@ static const struct hid_device_id kye_devices[] = {
 				USB_DEVICE_ID_KYE_EASYPEN_M610X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
 				USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, kye_devices);

drivers/hid/hid-logitech-dj.c

@@ -619,7 +619,7 @@ static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
 
 	struct hid_field *field;
 	struct hid_report *report;
-	unsigned char data[8];
+	unsigned char *data;
 	int offset;
 
 	dbg_hid("%s: %s, type:%d | code:%d | value:%d\n",
@@ -635,6 +635,13 @@ static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
 		return -1;
 	}
 	hid_set_field(field, offset, value);
+
+	data = hid_alloc_report_buf(field->report, GFP_ATOMIC);
+	if (!data) {
+		dev_warn(&dev->dev, "failed to allocate report buf memory\n");
+		return -1;
+	}
+
 	hid_output_report(field->report, &data[0]);
 
 	output_report_enum = &dj_rcv_hiddev->report_enum[HID_OUTPUT_REPORT];
@@ -645,8 +652,9 @@ static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
 
 	hid_hw_request(dj_rcv_hiddev, report, HID_REQ_SET_REPORT);
 
-	return 0;
+	kfree(data);
 
+	return 0;
 }
 
 static int logi_dj_ll_start(struct hid_device *hid)
@@ -801,10 +809,10 @@ static int logi_dj_probe(struct hid_device *hdev,
 	}
 
 	/* This is enabling the polling urb on the IN endpoint */
-	retval = hdev->ll_driver->open(hdev);
+	retval = hid_hw_open(hdev);
 	if (retval < 0) {
-		dev_err(&hdev->dev, "%s:hdev->ll_driver->open returned "
-			"error:%d\n", __func__, retval);
+		dev_err(&hdev->dev, "%s:hid_hw_open returned error:%d\n",
+			__func__, retval);
 		goto llopen_failed;
 	}
 
@@ -821,7 +829,7 @@ static int logi_dj_probe(struct hid_device *hdev,
 	return retval;
 
 logi_dj_recv_query_paired_devices_failed:
-	hdev->ll_driver->close(hdev);
+	hid_hw_close(hdev);
 
 llopen_failed:
 switch_to_dj_mode_fail:
@@ -863,7 +871,7 @@ static void logi_dj_remove(struct hid_device *hdev)
 
 	cancel_work_sync(&djrcv_dev->work);
 
-	hdev->ll_driver->close(hdev);
+	hid_hw_close(hdev);
 	hid_hw_stop(hdev);
 
 	/* I suppose that at this point the only context that can access

drivers/hid/hid-magicmouse.c

@@ -36,7 +36,7 @@ MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel");
 static unsigned int scroll_speed = 32;
 static int param_set_scroll_speed(const char *val, struct kernel_param *kp) {
 	unsigned long speed;
-	if (!val || strict_strtoul(val, 0, &speed) || speed > 63)
+	if (!val || kstrtoul(val, 0, &speed) || speed > 63)
 		return -EINVAL;
 	scroll_speed = speed;
 	return 0;
@@ -484,7 +484,7 @@ static int magicmouse_probe(struct hid_device *hdev,
 	struct hid_report *report;
 	int ret;
 
-	msc = kzalloc(sizeof(*msc), GFP_KERNEL);
+	msc = devm_kzalloc(&hdev->dev, sizeof(*msc), GFP_KERNEL);
 	if (msc == NULL) {
 		hid_err(hdev, "can't alloc magicmouse descriptor\n");
 		return -ENOMEM;
@@ -498,13 +498,13 @@ static int magicmouse_probe(struct hid_device *hdev,
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "magicmouse hid parse failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 	if (ret) {
 		hid_err(hdev, "magicmouse hw start failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	if (!msc->input) {
@@ -548,19 +548,9 @@ static int magicmouse_probe(struct hid_device *hdev,
 	return 0;
 err_stop_hw:
 	hid_hw_stop(hdev);
-err_free:
-	kfree(msc);
 	return ret;
 }
 
-static void magicmouse_remove(struct hid_device *hdev)
-{
-	struct magicmouse_sc *msc = hid_get_drvdata(hdev);
-
-	hid_hw_stop(hdev);
-	kfree(msc);
-}
-
 static const struct hid_device_id magic_mice[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
 		USB_DEVICE_ID_APPLE_MAGICMOUSE), .driver_data = 0 },
@@ -574,7 +564,6 @@ static struct hid_driver magicmouse_driver = {
 	.name = "magicmouse",
 	.id_table = magic_mice,
 	.probe = magicmouse_probe,
-	.remove = magicmouse_remove,
 	.raw_event = magicmouse_raw_event,
 	.input_mapping = magicmouse_input_mapping,
 	.input_configured = magicmouse_input_configured,

drivers/hid/hid-multitouch.c

@@ -133,6 +133,7 @@ static void mt_post_parse(struct mt_device *td);
 #define MT_CLS_NSMU				0x000a
 #define MT_CLS_DUAL_CONTACT_NUMBER		0x0010
 #define MT_CLS_DUAL_CONTACT_ID			0x0011
+#define MT_CLS_WIN_8				0x0012
 
 /* vendor specific classes */
 #define MT_CLS_3M				0x0101
@@ -205,6 +206,11 @@ static struct mt_class mt_classes[] = {
 			MT_QUIRK_CONTACT_CNT_ACCURATE |
 			MT_QUIRK_SLOT_IS_CONTACTID,
 		.maxcontacts = 2 },
+	{ .name = MT_CLS_WIN_8,
+		.quirks = MT_QUIRK_ALWAYS_VALID |
+			MT_QUIRK_IGNORE_DUPLICATES |
+			MT_QUIRK_HOVERING |
+			MT_QUIRK_CONTACT_CNT_ACCURATE },
 
 	/*
 	 * vendor specific classes
@@ -261,17 +267,6 @@ static struct mt_class mt_classes[] = {
 	{ }
 };
 
-static void mt_free_input_name(struct hid_input *hi)
-{
-	struct hid_device *hdev = hi->report->device;
-	const char *name = hi->input->name;
-
-	if (name != hdev->name) {
-		hi->input->name = hdev->name;
-		kfree(name);
-	}
-}
-
 static ssize_t mt_show_quirks(struct device *dev,
 			   struct device_attribute *attr,
 			   char *buf)
@@ -343,19 +338,6 @@ static void mt_feature_mapping(struct hid_device *hdev,
 			td->maxcontacts = td->mtclass.maxcontacts;
 
 		break;
-	case 0xff0000c5:
-		if (field->report_count == 256 && field->report_size == 8) {
-			/* Win 8 devices need special quirks */
-			__s32 *quirks = &td->mtclass.quirks;
-			*quirks |= MT_QUIRK_ALWAYS_VALID;
-			*quirks |= MT_QUIRK_IGNORE_DUPLICATES;
-			*quirks |= MT_QUIRK_HOVERING;
-			*quirks |= MT_QUIRK_CONTACT_CNT_ACCURATE;
-			*quirks &= ~MT_QUIRK_NOT_SEEN_MEANS_UP;
-			*quirks &= ~MT_QUIRK_VALID_IS_INRANGE;
-			*quirks &= ~MT_QUIRK_VALID_IS_CONFIDENCE;
-		}
-		break;
 	}
 }
 
@@ -415,13 +397,6 @@ static void mt_pen_report(struct hid_device *hid, struct hid_report *report)
 static void mt_pen_input_configured(struct hid_device *hdev,
 					struct hid_input *hi)
 {
-	char *name = kzalloc(strlen(hi->input->name) + 5, GFP_KERNEL);
-	if (name) {
-		sprintf(name, "%s Pen", hi->input->name);
-		mt_free_input_name(hi);
-		hi->input->name = name;
-	}
-
 	/* force BTN_STYLUS to allow tablet matching in udev */
 	__set_bit(BTN_STYLUS, hi->input->keybit);
 }
@@ -928,16 +903,26 @@ static void mt_post_parse(struct mt_device *td)
 static void mt_input_configured(struct hid_device *hdev, struct hid_input *hi)
 {
 	struct mt_device *td = hid_get_drvdata(hdev);
-	char *name = kstrdup(hdev->name, GFP_KERNEL);
-
-	if (name)
-		hi->input->name = name;
+	char *name;
+	const char *suffix = NULL;
 
 	if (hi->report->id == td->mt_report_id)
 		mt_touch_input_configured(hdev, hi);
 
-	if (hi->report->id == td->pen_report_id)
+	if (hi->report->field[0]->physical == HID_DG_STYLUS) {
+		suffix = "Pen";
 		mt_pen_input_configured(hdev, hi);
+	}
+
+	if (suffix) {
+		name = devm_kzalloc(&hi->input->dev,
+				    strlen(hdev->name) + strlen(suffix) + 2,
+				    GFP_KERNEL);
+		if (name) {
+			sprintf(name, "%s %s", hdev->name, suffix);
+			hi->input->name = name;
+		}
+	}
 }
 
 static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
@@ -945,7 +930,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	int ret, i;
 	struct mt_device *td;
 	struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */
-	struct hid_input *hi;
 
 	for (i = 0; mt_classes[i].name ; i++) {
 		if (id->driver_data == mt_classes[i].name) {
@@ -967,7 +951,19 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
 	hdev->quirks |= HID_QUIRK_NO_EMPTY_INPUT;
 
-	td = kzalloc(sizeof(struct mt_device), GFP_KERNEL);
+	/*
+	 * Handle special quirks for Windows 8 certified devices.
+	 */
+	if (id->group == HID_GROUP_MULTITOUCH_WIN_8)
+		/*
+		 * Some multitouch screens do not like to be polled for input
+		 * reports. Fortunately, the Win8 spec says that all touches
+		 * should be sent during each report, making the initialization
+		 * of input reports unnecessary.
+		 */
+		hdev->quirks |= HID_QUIRK_NO_INIT_INPUT_REPORTS;
+
+	td = devm_kzalloc(&hdev->dev, sizeof(struct mt_device), GFP_KERNEL);
 	if (!td) {
 		dev_err(&hdev->dev, "cannot allocate multitouch data\n");
 		return -ENOMEM;
@@ -980,11 +976,11 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	td->pen_report_id = -1;
 	hid_set_drvdata(hdev, td);
 
-	td->fields = kzalloc(sizeof(struct mt_fields), GFP_KERNEL);
+	td->fields = devm_kzalloc(&hdev->dev, sizeof(struct mt_fields),
+				  GFP_KERNEL);
 	if (!td->fields) {
 		dev_err(&hdev->dev, "cannot allocate multitouch fields data\n");
-		ret = -ENOMEM;
-		goto fail;
+		return -ENOMEM;
 	}
 
 	if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
@@ -992,29 +988,22 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	ret = hid_parse(hdev);
 	if (ret != 0)
-		goto fail;
+		return ret;
 
 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 	if (ret)
-		goto hid_fail;
+		return ret;
 
 	ret = sysfs_create_group(&hdev->dev.kobj, &mt_attribute_group);
 
 	mt_set_maxcontacts(hdev);
 	mt_set_input_mode(hdev);
 
-	kfree(td->fields);
+	/* release .fields memory as it is not used anymore */
+	devm_kfree(&hdev->dev, td->fields);
 	td->fields = NULL;
 
 	return 0;
-
-hid_fail:
-	list_for_each_entry(hi, &hdev->inputs, list)
-		mt_free_input_name(hi);
-fail:
-	kfree(td->fields);
-	kfree(td);
-	return ret;
 }
 
 #ifdef CONFIG_PM
@@ -1039,17 +1028,8 @@ static int mt_resume(struct hid_device *hdev)
 
 static void mt_remove(struct hid_device *hdev)
 {
-	struct mt_device *td = hid_get_drvdata(hdev);
-	struct hid_input *hi;
-
 	sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group);
-	list_for_each_entry(hi, &hdev->inputs, list)
-		mt_free_input_name(hi);
-
 	hid_hw_stop(hdev);
-
-	kfree(td);
-	hid_set_drvdata(hdev, NULL);
 }
 
 static const struct hid_device_id mt_devices[] = {
@@ -1371,6 +1351,11 @@ static const struct hid_device_id mt_devices[] = {
 
 	/* Generic MT device */
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
+
+	/* Generic Win 8 certified MT device */
+	{  .driver_data = MT_CLS_WIN_8,
+		HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH_WIN_8,
+			HID_ANY_ID, HID_ANY_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, mt_devices);

drivers/hid/hid-ntrig.c

@@ -115,7 +115,8 @@ static inline int ntrig_get_mode(struct hid_device *hdev)
 	struct hid_report *report = hdev->report_enum[HID_FEATURE_REPORT].
 				    report_id_hash[0x0d];
 
-	if (!report)
+	if (!report || report->maxfield < 1 ||
+	    report->field[0]->report_count < 1)
 		return -EINVAL;
 
 	hid_hw_request(hdev, report, HID_REQ_GET_REPORT);
@@ -237,7 +238,7 @@ static ssize_t set_min_width(struct device *dev,
 
 	unsigned long val;
 
-	if (strict_strtoul(buf, 0, &val))
+	if (kstrtoul(buf, 0, &val))
 		return -EINVAL;
 
 	if (val > nd->sensor_physical_width)
@@ -272,7 +273,7 @@ static ssize_t set_min_height(struct device *dev,
 
 	unsigned long val;
 
-	if (strict_strtoul(buf, 0, &val))
+	if (kstrtoul(buf, 0, &val))
 		return -EINVAL;
 
 	if (val > nd->sensor_physical_height)
@@ -306,7 +307,7 @@ static ssize_t set_activate_slack(struct device *dev,
 
 	unsigned long val;
 
-	if (strict_strtoul(buf, 0, &val))
+	if (kstrtoul(buf, 0, &val))
 		return -EINVAL;
 
 	if (val > 0x7f)
@@ -341,7 +342,7 @@ static ssize_t set_activation_width(struct device *dev,
 
 	unsigned long val;
 
-	if (strict_strtoul(buf, 0, &val))
+	if (kstrtoul(buf, 0, &val))
 		return -EINVAL;
 
 	if (val > nd->sensor_physical_width)
@@ -377,7 +378,7 @@ static ssize_t set_activation_height(struct device *dev,
 
 	unsigned long val;
 
-	if (strict_strtoul(buf, 0, &val))
+	if (kstrtoul(buf, 0, &val))
 		return -EINVAL;
 
 	if (val > nd->sensor_physical_height)
@@ -411,7 +412,7 @@ static ssize_t set_deactivate_slack(struct device *dev,
 
 	unsigned long val;
 
-	if (strict_strtoul(buf, 0, &val))
+	if (kstrtoul(buf, 0, &val))
 		return -EINVAL;
 
 	/*

drivers/hid/hid-picolcd_cir.c

@@ -145,6 +145,7 @@ void picolcd_exit_cir(struct picolcd_data *data)
 	struct rc_dev *rdev = data->rc_dev;
 
 	data->rc_dev = NULL;
-	rc_unregister_device(rdev);
+	if (rdev)
+		rc_unregister_device(rdev);
 }
 

drivers/hid/hid-picolcd_core.c

@@ -290,7 +290,7 @@ static ssize_t picolcd_operation_mode_store(struct device *dev,
 		buf += 10;
 		cnt -= 10;
 	}
-	if (!report)
+	if (!report || report->maxfield != 1)
 		return -EINVAL;
 
 	while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r'))

drivers/hid/hid-picolcd_debugfs.c

@@ -394,7 +394,7 @@ static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data,
 void picolcd_debug_out_report(struct picolcd_data *data,
 		struct hid_device *hdev, struct hid_report *report)
 {
-	u8 raw_data[70];
+	u8 *raw_data;
 	int raw_size = (report->size >> 3) + 1;
 	char *buff;
 #define BUFF_SZ 256
@@ -407,20 +407,20 @@ void picolcd_debug_out_report(struct picolcd_data *data,
 	if (!buff)
 		return;
 
-	snprintf(buff, BUFF_SZ, "\nout report %d (size %d) =  ",
-			report->id, raw_size);
-	hid_debug_event(hdev, buff);
-	if (raw_size + 5 > sizeof(raw_data)) {
+	raw_data = hid_alloc_report_buf(report, GFP_ATOMIC);
+	if (!raw_data) {
 		kfree(buff);
-		hid_debug_event(hdev, " TOO BIG\n");
 		return;
-	} else {
-		raw_data[0] = report->id;
-		hid_output_report(report, raw_data);
-		dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size);
-		hid_debug_event(hdev, buff);
 	}
 
+	snprintf(buff, BUFF_SZ, "\nout report %d (size %d) =  ",
+			report->id, raw_size);
+	hid_debug_event(hdev, buff);
+	raw_data[0] = report->id;
+	hid_output_report(report, raw_data);
+	dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size);
+	hid_debug_event(hdev, buff);
+
 	switch (report->id) {
 	case REPORT_LED_STATE:
 		/* 1 data byte with GPO state */
@@ -644,6 +644,7 @@ void picolcd_debug_out_report(struct picolcd_data *data,
 		break;
 	}
 	wake_up_interruptible(&hdev->debug_wait);
+	kfree(raw_data);
 	kfree(buff);
 }
 

drivers/hid/hid-picolcd_fb.c

@@ -593,10 +593,14 @@ int picolcd_init_framebuffer(struct picolcd_data *data)
 void picolcd_exit_framebuffer(struct picolcd_data *data)
 {
 	struct fb_info *info = data->fb_info;
-	struct picolcd_fb_data *fbdata = info->par;
+	struct picolcd_fb_data *fbdata;
 	unsigned long flags;
 
+	if (!info)
+		return;
+
 	device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate);
+	fbdata = info->par;
 
 	/* disconnect framebuffer from HID dev */
 	spin_lock_irqsave(&fbdata->lock, flags);

drivers/hid/hid-pl.c

@@ -132,8 +132,14 @@ static int plff_init(struct hid_device *hid)
 			strong = &report->field[0]->value[2];
 			weak = &report->field[0]->value[3];
 			debug("detected single-field device");
-		} else if (report->maxfield >= 4 && report->field[0]->maxusage == 1 &&
-				report->field[0]->usage[0].hid == (HID_UP_LED | 0x43)) {
+		} else if (report->field[0]->maxusage == 1 &&
+			   report->field[0]->usage[0].hid ==
+				(HID_UP_LED | 0x43) &&
+			   report->maxfield >= 4 &&
+			   report->field[0]->report_count >= 1 &&
+			   report->field[1]->report_count >= 1 &&
+			   report->field[2]->report_count >= 1 &&
+			   report->field[3]->report_count >= 1) {
 			report->field[0]->value[0] = 0x00;
 			report->field[1]->value[0] = 0x00;
 			strong = &report->field[2]->value[0];

drivers/hid/hid-roccat-arvo.c

@@ -59,7 +59,7 @@ static ssize_t arvo_sysfs_set_mode_key(struct device *dev,
 	unsigned long state;
 	int retval;
 
-	retval = strict_strtoul(buf, 10, &state);
+	retval = kstrtoul(buf, 10, &state);
 	if (retval)
 		return retval;
 
@@ -107,7 +107,7 @@ static ssize_t arvo_sysfs_set_key_mask(struct device *dev,
 	unsigned long key_mask;
 	int retval;
 
-	retval = strict_strtoul(buf, 10, &key_mask);
+	retval = kstrtoul(buf, 10, &key_mask);
 	if (retval)
 		return retval;
 
@@ -159,7 +159,7 @@ static ssize_t arvo_sysfs_set_actual_profile(struct device *dev,
 	unsigned long profile;
 	int retval;
 
-	retval = strict_strtoul(buf, 10, &profile);
+	retval = kstrtoul(buf, 10, &profile);
 	if (retval)
 		return retval;
 

drivers/hid/hid-roccat-isku.c

@@ -82,7 +82,7 @@ static ssize_t isku_sysfs_set_actual_profile(struct device *dev,
 	isku = hid_get_drvdata(dev_get_drvdata(dev));
 	usb_dev = interface_to_usbdev(to_usb_interface(dev));
 
-	retval = strict_strtoul(buf, 10, &profile);
+	retval = kstrtoul(buf, 10, &profile);
 	if (retval)
 		return retval;
 

drivers/hid/hid-roccat-kone.c

@@ -456,7 +456,7 @@ static ssize_t kone_sysfs_set_tcu(struct device *dev,
 	kone = hid_get_drvdata(dev_get_drvdata(dev));
 	usb_dev = interface_to_usbdev(to_usb_interface(dev));
 
-	retval = strict_strtoul(buf, 10, &state);
+	retval = kstrtoul(buf, 10, &state);
 	if (retval)
 		return retval;
 
@@ -545,7 +545,7 @@ static ssize_t kone_sysfs_set_startup_profile(struct device *dev,
 	kone = hid_get_drvdata(dev_get_drvdata(dev));
 	usb_dev = interface_to_usbdev(to_usb_interface(dev));
 
-	retval = strict_strtoul(buf, 10, &new_startup_profile);
+	retval = kstrtoul(buf, 10, &new_startup_profile);
 	if (retval)
 		return retval;
 

drivers/hid/hid-roccat-koneplus.c

@@ -246,7 +246,7 @@ static ssize_t koneplus_sysfs_set_actual_profile(struct device *dev,
 	koneplus = hid_get_drvdata(dev_get_drvdata(dev));
 	usb_dev = interface_to_usbdev(to_usb_interface(dev));
 
-	retval = strict_strtoul(buf, 10, &profile);
+	retval = kstrtoul(buf, 10, &profile);
 	if (retval)
 		return retval;
 

drivers/hid/hid-roccat-konepure.c

@@ -262,6 +262,7 @@ static int konepure_raw_event(struct hid_device *hdev,
 
 static const struct hid_device_id konepure_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPURE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPURE_OPTICAL) },
 	{ }
 };
 
@@ -300,5 +301,5 @@ module_init(konepure_init);
 module_exit(konepure_exit);
 
 MODULE_AUTHOR("Stefan Achatz");
-MODULE_DESCRIPTION("USB Roccat KonePure driver");
+MODULE_DESCRIPTION("USB Roccat KonePure/Optical driver");
 MODULE_LICENSE("GPL v2");

drivers/hid/hid-roccat-kovaplus.c

@@ -282,7 +282,7 @@ static ssize_t kovaplus_sysfs_set_actual_profile(struct device *dev,
 	kovaplus = hid_get_drvdata(dev_get_drvdata(dev));
 	usb_dev = interface_to_usbdev(to_usb_interface(dev));
 
-	retval = strict_strtoul(buf, 10, &profile);
+	retval = kstrtoul(buf, 10, &profile);
 	if (retval)
 		return retval;
 

drivers/hid/hid-sensor-hub.c

@@ -221,7 +221,8 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 
 	mutex_lock(&data->mutex);
 	report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT);
-	if (!report || (field_index >=  report->maxfield)) {
+	if (!report || (field_index >=  report->maxfield) ||
+	    report->field[field_index]->report_count < 1) {
 		ret = -EINVAL;
 		goto done_proc;
 	}
@@ -416,7 +417,7 @@ static int sensor_hub_raw_event(struct hid_device *hdev,
 		return 1;
 
 	ptr = raw_data;
-	ptr++; /*Skip report id*/
+	ptr++; /* Skip report id */
 
 	spin_lock_irqsave(&pdata->lock, flags);
 

drivers/hid/hid-sony.c

@@ -624,7 +624,7 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	struct sony_sc *sc;
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
 
-	sc = kzalloc(sizeof(*sc), GFP_KERNEL);
+	sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL);
 	if (sc == NULL) {
 		hid_err(hdev, "can't alloc sony descriptor\n");
 		return -ENOMEM;
@@ -636,7 +636,7 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "parse failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	if (sc->quirks & VAIO_RDESC_CONSTANT)
@@ -649,7 +649,7 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	ret = hid_hw_start(hdev, connect_mask);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
@@ -669,8 +669,6 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	return 0;
 err_stop:
 	hid_hw_stop(hdev);
-err_free:
-	kfree(sc);
 	return ret;
 }
 
@@ -682,7 +680,6 @@ static void sony_remove(struct hid_device *hdev)
 		buzz_remove(hdev);
 
 	hid_hw_stop(hdev);
-	kfree(sc);
 }
 
 static const struct hid_device_id sony_devices[] = {

drivers/hid/hid-speedlink.c

@@ -3,7 +3,7 @@
  *  Fixes "jumpy" cursor and removes nonexistent keyboard LEDS from
  *  the HID descriptor.
  *
- *  Copyright (c) 2011 Stefan Kriwanek <mail@stefankriwanek.de>
+ *  Copyright (c) 2011, 2013 Stefan Kriwanek <dev@stefankriwanek.de>
  */
 
 /*
@@ -46,8 +46,13 @@ static int speedlink_event(struct hid_device *hdev, struct hid_field *field,
 		struct hid_usage *usage, __s32 value)
 {
 	/* No other conditions due to usage_table. */
-	/* Fix "jumpy" cursor (invalid events sent by device). */
-	if (value == 256)
+
+	/* This fixes the "jumpy" cursor occuring due to invalid events sent
+	 * by the device. Some devices only send them with value==+256, others
+	 * don't. However, catching abs(value)>=256 is restrictive enough not
+	 * to interfere with devices that were bug-free (has been tested).
+	 */
+	if (abs(value) >= 256)
 		return 1;
 	/* Drop useless distance 0 events (on button clicks etc.) as well */
 	if (value == 0)

drivers/hid/hid-wiimote-core.c

@@ -212,10 +212,12 @@ static __u8 select_drm(struct wiimote_data *wdata)
 
 	if (ir == WIIPROTO_FLAG_IR_BASIC) {
 		if (wdata->state.flags & WIIPROTO_FLAG_ACCEL) {
-			if (ext)
-				return WIIPROTO_REQ_DRM_KAIE;
-			else
-				return WIIPROTO_REQ_DRM_KAI;
+			/* GEN10 and ealier devices bind IR formats to DRMs.
+			 * Hence, we cannot use DRM_KAI here as it might be
+			 * bound to IR_EXT. Use DRM_KAIE unconditionally so we
+			 * work with all devices and our parsers can use the
+			 * fixed formats, too. */
+			return WIIPROTO_REQ_DRM_KAIE;
 		} else {
 			return WIIPROTO_REQ_DRM_KIE;
 		}
@@ -439,8 +441,7 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata, __u8 *rmem)
 	if (ret != 6)
 		return WIIMOTE_EXT_NONE;
 
-	hid_dbg(wdata->hdev, "extension ID: %02x:%02x %02x:%02x %02x:%02x\n",
-		rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
+	hid_dbg(wdata->hdev, "extension ID: %6phC\n", rmem);
 
 	if (rmem[0] == 0xff && rmem[1] == 0xff && rmem[2] == 0xff &&
 	    rmem[3] == 0xff && rmem[4] == 0xff && rmem[5] == 0xff)
@@ -454,6 +455,12 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata, __u8 *rmem)
 		return WIIMOTE_EXT_BALANCE_BOARD;
 	if (rmem[4] == 0x01 && rmem[5] == 0x20)
 		return WIIMOTE_EXT_PRO_CONTROLLER;
+	if (rmem[0] == 0x01 && rmem[1] == 0x00 &&
+	    rmem[4] == 0x01 && rmem[5] == 0x03)
+		return WIIMOTE_EXT_GUITAR_HERO_DRUMS;
+	if (rmem[0] == 0x00 && rmem[1] == 0x00 &&
+	    rmem[4] == 0x01 && rmem[5] == 0x03)
+		return WIIMOTE_EXT_GUITAR_HERO_GUITAR;
 
 	return WIIMOTE_EXT_UNKNOWN;
 }
@@ -487,6 +494,8 @@ static bool wiimote_cmd_map_mp(struct wiimote_data *wdata, __u8 exttype)
 	/* map MP with correct pass-through mode */
 	switch (exttype) {
 	case WIIMOTE_EXT_CLASSIC_CONTROLLER:
+	case WIIMOTE_EXT_GUITAR_HERO_DRUMS:
+	case WIIMOTE_EXT_GUITAR_HERO_GUITAR:
 		wmem = 0x07;
 		break;
 	case WIIMOTE_EXT_NUNCHUK:
@@ -510,14 +519,12 @@ static bool wiimote_cmd_read_mp(struct wiimote_data *wdata, __u8 *rmem)
 	if (ret != 6)
 		return false;
 
-	hid_dbg(wdata->hdev, "motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n",
-		rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
+	hid_dbg(wdata->hdev, "motion plus ID: %6phC\n", rmem);
 
 	if (rmem[5] == 0x05)
 		return true;
 
-	hid_info(wdata->hdev, "unknown motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n",
-		 rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
+	hid_info(wdata->hdev, "unknown motion plus ID: %6phC\n", rmem);
 
 	return false;
 }
@@ -533,8 +540,7 @@ static __u8 wiimote_cmd_read_mp_mapped(struct wiimote_data *wdata)
 	if (ret != 6)
 		return WIIMOTE_MP_NONE;
 
-	hid_dbg(wdata->hdev, "mapped motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n",
-		rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
+	hid_dbg(wdata->hdev, "mapped motion plus ID: %6phC\n", rmem);
 
 	if (rmem[0] == 0xff && rmem[1] == 0xff && rmem[2] == 0xff &&
 	    rmem[3] == 0xff && rmem[4] == 0xff && rmem[5] == 0xff)
@@ -1077,6 +1083,8 @@ static const char *wiimote_exttype_names[WIIMOTE_EXT_NUM] = {
 	[WIIMOTE_EXT_CLASSIC_CONTROLLER] = "Nintendo Wii Classic Controller",
 	[WIIMOTE_EXT_BALANCE_BOARD] = "Nintendo Wii Balance Board",
 	[WIIMOTE_EXT_PRO_CONTROLLER] = "Nintendo Wii U Pro Controller",
+	[WIIMOTE_EXT_GUITAR_HERO_DRUMS] = "Nintendo Wii Guitar Hero Drums",
+	[WIIMOTE_EXT_GUITAR_HERO_GUITAR] = "Nintendo Wii Guitar Hero Guitar",
 };
 
 /*
@@ -1126,9 +1134,8 @@ static void wiimote_init_hotplug(struct wiimote_data *wdata)
 		wiimote_ext_unload(wdata);
 
 		if (exttype == WIIMOTE_EXT_UNKNOWN) {
-			hid_info(wdata->hdev, "cannot detect extension; %02x:%02x %02x:%02x %02x:%02x\n",
-				 extdata[0], extdata[1], extdata[2],
-				 extdata[3], extdata[4], extdata[5]);
+			hid_info(wdata->hdev, "cannot detect extension; %6phC\n",
+				 extdata);
 		} else if (exttype == WIIMOTE_EXT_NONE) {
 			spin_lock_irq(&wdata->state.lock);
 			wdata->state.exttype = WIIMOTE_EXT_NONE;
@@ -1663,6 +1670,10 @@ static ssize_t wiimote_ext_show(struct device *dev,
 		return sprintf(buf, "balanceboard\n");
 	case WIIMOTE_EXT_PRO_CONTROLLER:
 		return sprintf(buf, "procontroller\n");
+	case WIIMOTE_EXT_GUITAR_HERO_DRUMS:
+		return sprintf(buf, "drums\n");
+	case WIIMOTE_EXT_GUITAR_HERO_GUITAR:
+		return sprintf(buf, "guitar\n");
 	case WIIMOTE_EXT_UNKNOWN:
 		/* fallthrough */
 	default:

drivers/hid/hid-wiimote.h

@@ -88,6 +88,8 @@ enum wiimote_exttype {
 	WIIMOTE_EXT_CLASSIC_CONTROLLER,
 	WIIMOTE_EXT_BALANCE_BOARD,
 	WIIMOTE_EXT_PRO_CONTROLLER,
+	WIIMOTE_EXT_GUITAR_HERO_DRUMS,
+	WIIMOTE_EXT_GUITAR_HERO_GUITAR,
 	WIIMOTE_EXT_NUM,
 };
 
@@ -135,6 +137,7 @@ struct wiimote_state {
 
 	/* calibration data */
 	__u16 calib_bboard[4][3];
+	__u8 pressure_drums[7];
 };
 
 struct wiimote_data {

drivers/hid/hid-xinmo.c

+/*
+ *  HID driver for Xin-Mo devices, currently only the Dual Arcade controller.
+ *  Fixes the negative axis event values (the devices sends -2) to match the
+ *  logical axis minimum of the HID report descriptor (the report announces
+ *  -1). It is needed because hid-input discards out of bounds values.
+ *  (This module is based on "hid-saitek" and "hid-lg".)
+ *
+ *  Copyright (c) 2013 Olivier Scherler
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include "hid-ids.h"
+
+/*
+ * Fix negative events that are out of bounds.
+ */
+static int xinmo_event(struct hid_device *hdev, struct hid_field *field,
+		struct hid_usage *usage, __s32 value)
+{
+	switch (usage->code) {
+	case ABS_X:
+	case ABS_Y:
+	case ABS_Z:
+	case ABS_RX:
+		if (value < -1) {
+			input_event(field->hidinput->input, usage->type,
+				usage->code, -1);
+			return 1;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id xinmo_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, xinmo_devices);
+
+static struct hid_driver xinmo_driver = {
+	.name = "xinmo",
+	.id_table = xinmo_devices,
+	.event = xinmo_event
+};
+
+module_hid_driver(xinmo_driver);
+MODULE_LICENSE("GPL");

drivers/hid/hid-zydacron.c

@@ -169,7 +169,7 @@ static int zc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	int ret;
 	struct zc_device *zc;
 
-	zc = kzalloc(sizeof(*zc), GFP_KERNEL);
+	zc = devm_kzalloc(&hdev->dev, sizeof(*zc), GFP_KERNEL);
 	if (zc == NULL) {
 		hid_err(hdev, "can't alloc descriptor\n");
 		return -ENOMEM;
@@ -180,28 +180,16 @@ static int zc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "parse failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
-		goto err_free;
+		return ret;
 	}
 
 	return 0;
-err_free:
-	kfree(zc);
-
-	return ret;
-}
-
-static void zc_remove(struct hid_device *hdev)
-{
-	struct zc_device *zc = hid_get_drvdata(hdev);
-
-	hid_hw_stop(hdev);
-	kfree(zc);
 }
 
 static const struct hid_device_id zc_devices[] = {
@@ -217,7 +205,6 @@ static struct hid_driver zc_driver = {
 	.input_mapping = zc_input_mapping,
 	.raw_event = zc_raw_event,
 	.probe = zc_probe,
-	.remove = zc_remove,
 };
 module_hid_driver(zc_driver);
 

drivers/hid/hidraw.c

@@ -113,7 +113,7 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
 	__u8 *buf;
 	int ret = 0;
 
-	if (!hidraw_table[minor]) {
+	if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
 		ret = -ENODEV;
 		goto out;
 	}
@@ -253,6 +253,7 @@ static int hidraw_open(struct inode *inode, struct file *file)
 	unsigned int minor = iminor(inode);
 	struct hidraw *dev;
 	struct hidraw_list *list;
+	unsigned long flags;
 	int err = 0;
 
 	if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) {
@@ -261,16 +262,11 @@ static int hidraw_open(struct inode *inode, struct file *file)
 	}
 
 	mutex_lock(&minors_lock);
-	if (!hidraw_table[minor]) {
+	if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
 		err = -ENODEV;
 		goto out_unlock;
 	}
 
-	list->hidraw = hidraw_table[minor];
-	mutex_init(&list->read_mutex);
-	list_add_tail(&list->node, &hidraw_table[minor]->list);
-	file->private_data = list;
-
 	dev = hidraw_table[minor];
 	if (!dev->open++) {
 		err = hid_hw_power(dev->hid, PM_HINT_FULLON);
@@ -283,9 +279,16 @@ static int hidraw_open(struct inode *inode, struct file *file)
 		if (err < 0) {
 			hid_hw_power(dev->hid, PM_HINT_NORMAL);
 			dev->open--;
+			goto out_unlock;
 		}
 	}
 
+	list->hidraw = hidraw_table[minor];
+	mutex_init(&list->read_mutex);
+	spin_lock_irqsave(&hidraw_table[minor]->list_lock, flags);
+	list_add_tail(&list->node, &hidraw_table[minor]->list);
+	spin_unlock_irqrestore(&hidraw_table[minor]->list_lock, flags);
+	file->private_data = list;
 out_unlock:
 	mutex_unlock(&minors_lock);
 out:
@@ -302,39 +305,41 @@ static int hidraw_fasync(int fd, struct file *file, int on)
 	return fasync_helper(fd, file, on, &list->fasync);
 }
 
+static void drop_ref(struct hidraw *hidraw, int exists_bit)
+{
+	if (exists_bit) {
+		hid_hw_close(hidraw->hid);
+		hidraw->exist = 0;
+		if (hidraw->open)
+			wake_up_interruptible(&hidraw->wait);
+	} else {
+		--hidraw->open;
+	}
+
+	if (!hidraw->open && !hidraw->exist) {
+		device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
+		hidraw_table[hidraw->minor] = NULL;
+		kfree(hidraw);
+	}
+}
+
 static int hidraw_release(struct inode * inode, struct file * file)
 {
 	unsigned int minor = iminor(inode);
-	struct hidraw *dev;
 	struct hidraw_list *list = file->private_data;
-	int ret;
-	int i;
+	unsigned long flags;
 
 	mutex_lock(&minors_lock);
-	if (!hidraw_table[minor]) {
-		ret = -ENODEV;
-		goto unlock;
-	}
 
+	spin_lock_irqsave(&hidraw_table[minor]->list_lock, flags);
 	list_del(&list->node);
-	dev = hidraw_table[minor];
-	if (!--dev->open) {
-		if (list->hidraw->exist) {
-			hid_hw_power(dev->hid, PM_HINT_NORMAL);
-			hid_hw_close(dev->hid);
-		} else {
-			kfree(list->hidraw);
-		}
-	}
-
-	for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i)
-		kfree(list->buffer[i].value);
+	spin_unlock_irqrestore(&hidraw_table[minor]->list_lock, flags);
 	kfree(list);
-	ret = 0;
-unlock:
-	mutex_unlock(&minors_lock);
 
-	return ret;
+	drop_ref(hidraw_table[minor], 0);
+
+	mutex_unlock(&minors_lock);
+	return 0;
 }
 
 static long hidraw_ioctl(struct file *file, unsigned int cmd,
@@ -457,7 +462,9 @@ int hidraw_report_event(struct hid_device *hid, u8 *data, int len)
 	struct hidraw *dev = hid->hidraw;
 	struct hidraw_list *list;
 	int ret = 0;
+	unsigned long flags;
 
+	spin_lock_irqsave(&dev->list_lock, flags);
 	list_for_each_entry(list, &dev->list, node) {
 		int new_head = (list->head + 1) & (HIDRAW_BUFFER_SIZE - 1);
 
@@ -472,6 +479,7 @@ int hidraw_report_event(struct hid_device *hid, u8 *data, int len)
 		list->head = new_head;
 		kill_fasync(&list->fasync, SIGIO, POLL_IN);
 	}
+	spin_unlock_irqrestore(&dev->list_lock, flags);
 
 	wake_up_interruptible(&dev->wait);
 	return ret;
@@ -519,6 +527,7 @@ int hidraw_connect(struct hid_device *hid)
 	}
 
 	init_waitqueue_head(&dev->wait);
+	spin_lock_init(&dev->list_lock);
 	INIT_LIST_HEAD(&dev->list);
 
 	dev->hid = hid;
@@ -539,18 +548,9 @@ void hidraw_disconnect(struct hid_device *hid)
 	struct hidraw *hidraw = hid->hidraw;
 
 	mutex_lock(&minors_lock);
-	hidraw->exist = 0;
 
-	device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
+	drop_ref(hidraw, 1);
 
-	hidraw_table[hidraw->minor] = NULL;
-
-	if (hidraw->open) {
-		hid_hw_close(hid);
-		wake_up_interruptible(&hidraw->wait);
-	} else {
-		kfree(hidraw);
-	}
 	mutex_unlock(&minors_lock);
 }
 EXPORT_SYMBOL_GPL(hidraw_disconnect);

drivers/hid/i2c-hid/i2c-hid.c

@@ -35,6 +35,7 @@
 #include <linux/hid.h>
 #include <linux/mutex.h>
 #include <linux/acpi.h>
+#include <linux/of.h>
 
 #include <linux/i2c/i2c-hid.h>
 
@@ -756,29 +757,6 @@ static int i2c_hid_power(struct hid_device *hid, int lvl)
 	return ret;
 }
 
-static int i2c_hid_hidinput_input_event(struct input_dev *dev,
-		unsigned int type, unsigned int code, int value)
-{
-	struct hid_device *hid = input_get_drvdata(dev);
-	struct hid_field *field;
-	int offset;
-
-	if (type == EV_FF)
-		return input_ff_event(dev, type, code, value);
-
-	if (type != EV_LED)
-		return -1;
-
-	offset = hidinput_find_field(hid, type, code, &field);
-
-	if (offset == -1) {
-		hid_warn(dev, "event field not found\n");
-		return -1;
-	}
-
-	return hid_set_field(field, offset, value);
-}
-
 static struct hid_ll_driver i2c_hid_ll_driver = {
 	.parse = i2c_hid_parse,
 	.start = i2c_hid_start,
@@ -787,7 +765,6 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
 	.close = i2c_hid_close,
 	.power = i2c_hid_power,
 	.request = i2c_hid_request,
-	.hidinput_input_event = i2c_hid_hidinput_input_event,
 };
 
 static int i2c_hid_init_irq(struct i2c_client *client)
@@ -824,8 +801,8 @@ static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
 	 * bytes 2-3 -> bcdVersion (has to be 1.00) */
 	ret = i2c_hid_command(client, &hid_descr_cmd, ihid->hdesc_buffer, 4);
 
-	i2c_hid_dbg(ihid, "%s, ihid->hdesc_buffer: %*ph\n",
-			__func__, 4, ihid->hdesc_buffer);
+	i2c_hid_dbg(ihid, "%s, ihid->hdesc_buffer: %4ph\n", __func__,
+			ihid->hdesc_buffer);
 
 	if (ret) {
 		dev_err(&client->dev,
@@ -934,6 +911,42 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
 }
 #endif
 
+#ifdef CONFIG_OF
+static int i2c_hid_of_probe(struct i2c_client *client,
+		struct i2c_hid_platform_data *pdata)
+{
+	struct device *dev = &client->dev;
+	u32 val;
+	int ret;
+
+	ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val);
+	if (ret) {
+		dev_err(&client->dev, "HID register address not provided\n");
+		return -ENODEV;
+	}
+	if (val >> 16) {
+		dev_err(&client->dev, "Bad HID register address: 0x%08x\n",
+			val);
+		return -EINVAL;
+	}
+	pdata->hid_descriptor_address = val;
+
+	return 0;
+}
+
+static const struct of_device_id i2c_hid_of_match[] = {
+	{ .compatible = "hid-over-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
+#else
+static inline int i2c_hid_of_probe(struct i2c_client *client,
+		struct i2c_hid_platform_data *pdata)
+{
+	return -ENODEV;
+}
+#endif
+
 static int i2c_hid_probe(struct i2c_client *client,
 			 const struct i2c_device_id *dev_id)
 {
@@ -955,7 +968,11 @@ static int i2c_hid_probe(struct i2c_client *client,
 	if (!ihid)
 		return -ENOMEM;
 
-	if (!platform_data) {
+	if (client->dev.of_node) {
+		ret = i2c_hid_of_probe(client, &ihid->pdata);
+		if (ret)
+			goto err;
+	} else if (!platform_data) {
 		ret = i2c_hid_acpi_pdata(client, &ihid->pdata);
 		if (ret) {
 			dev_err(&client->dev,
@@ -1096,6 +1113,7 @@ static struct i2c_driver i2c_hid_driver = {
 		.owner	= THIS_MODULE,
 		.pm	= &i2c_hid_pm,
 		.acpi_match_table = ACPI_PTR(i2c_hid_acpi_match),
+		.of_match_table = of_match_ptr(i2c_hid_of_match),
 	},
 
 	.probe		= i2c_hid_probe,

drivers/hid/uhid.c

@@ -116,30 +116,6 @@ static void uhid_hid_close(struct hid_device *hid)
 	uhid_queue_event(uhid, UHID_CLOSE);
 }
 
-static int uhid_hid_input(struct input_dev *input, unsigned int type,
-			  unsigned int code, int value)
-{
-	struct hid_device *hid = input_get_drvdata(input);
-	struct uhid_device *uhid = hid->driver_data;
-	unsigned long flags;
-	struct uhid_event *ev;
-
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev)
-		return -ENOMEM;
-
-	ev->type = UHID_OUTPUT_EV;
-	ev->u.output_ev.type = type;
-	ev->u.output_ev.code = code;
-	ev->u.output_ev.value = value;
-
-	spin_lock_irqsave(&uhid->qlock, flags);
-	uhid_queue(uhid, ev);
-	spin_unlock_irqrestore(&uhid->qlock, flags);
-
-	return 0;
-}
-
 static int uhid_hid_parse(struct hid_device *hid)
 {
 	struct uhid_device *uhid = hid->driver_data;
@@ -273,7 +249,6 @@ static struct hid_ll_driver uhid_hid_driver = {
 	.stop = uhid_hid_stop,
 	.open = uhid_hid_open,
 	.close = uhid_hid_close,
-	.hidinput_input_event = uhid_hid_input,
 	.parse = uhid_hid_parse,
 };
 
@@ -659,3 +634,4 @@ module_exit(uhid_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Herrmann <dh.herrmann@gmail.com>");
 MODULE_DESCRIPTION("User-space I/O driver support for HID subsystem");
+MODULE_ALIAS("devname:" UHID_NAME);

drivers/hid/usbhid/hid-core.c

@@ -535,7 +535,6 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
 {
 	int head;
 	struct usbhid_device *usbhid = hid->driver_data;
-	int len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
 
 	if ((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN)
 		return;
@@ -546,7 +545,7 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
 			return;
 		}
 
-		usbhid->out[usbhid->outhead].raw_report = kmalloc(len, GFP_ATOMIC);
+		usbhid->out[usbhid->outhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC);
 		if (!usbhid->out[usbhid->outhead].raw_report) {
 			hid_warn(hid, "output queueing failed\n");
 			return;
@@ -595,7 +594,7 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
 	}
 
 	if (dir == USB_DIR_OUT) {
-		usbhid->ctrl[usbhid->ctrlhead].raw_report = kmalloc(len, GFP_ATOMIC);
+		usbhid->ctrl[usbhid->ctrlhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC);
 		if (!usbhid->ctrl[usbhid->ctrlhead].raw_report) {
 			hid_warn(hid, "control queueing failed\n");
 			return;
@@ -649,62 +648,6 @@ static void usbhid_submit_report(struct hid_device *hid, struct hid_report *repo
 	spin_unlock_irqrestore(&usbhid->lock, flags);
 }
 
-/* Workqueue routine to send requests to change LEDs */
-static void hid_led(struct work_struct *work)
-{
-	struct usbhid_device *usbhid =
-		container_of(work, struct usbhid_device, led_work);
-	struct hid_device *hid = usbhid->hid;
-	struct hid_field *field;
-	unsigned long flags;
-
-	field = hidinput_get_led_field(hid);
-	if (!field) {
-		hid_warn(hid, "LED event field not found\n");
-		return;
-	}
-
-	spin_lock_irqsave(&usbhid->lock, flags);
-	if (!test_bit(HID_DISCONNECTED, &usbhid->iofl)) {
-		usbhid->ledcount = hidinput_count_leds(hid);
-		hid_dbg(usbhid->hid, "New ledcount = %u\n", usbhid->ledcount);
-		__usbhid_submit_report(hid, field->report, USB_DIR_OUT);
-	}
-	spin_unlock_irqrestore(&usbhid->lock, flags);
-}
-
-static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
-	struct hid_device *hid = input_get_drvdata(dev);
-	struct usbhid_device *usbhid = hid->driver_data;
-	struct hid_field *field;
-	unsigned long flags;
-	int offset;
-
-	if (type == EV_FF)
-		return input_ff_event(dev, type, code, value);
-
-	if (type != EV_LED)
-		return -1;
-
-	if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
-		hid_warn(dev, "event field not found\n");
-		return -1;
-	}
-
-	spin_lock_irqsave(&usbhid->lock, flags);
-	hid_set_field(field, offset, value);
-	spin_unlock_irqrestore(&usbhid->lock, flags);
-
-	/*
-	 * Defer performing requested LED action.
-	 * This is more likely gather all LED changes into a single URB.
-	 */
-	schedule_work(&usbhid->led_work);
-
-	return 0;
-}
-
 static int usbhid_wait_io(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
@@ -807,12 +750,17 @@ void usbhid_init_reports(struct hid_device *hid)
 {
 	struct hid_report *report;
 	struct usbhid_device *usbhid = hid->driver_data;
+	struct hid_report_enum *report_enum;
 	int err, ret;
 
-	list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list)
-		usbhid_submit_report(hid, report, USB_DIR_IN);
+	if (!(hid->quirks & HID_QUIRK_NO_INIT_INPUT_REPORTS)) {
+		report_enum = &hid->report_enum[HID_INPUT_REPORT];
+		list_for_each_entry(report, &report_enum->report_list, list)
+			usbhid_submit_report(hid, report, USB_DIR_IN);
+	}
 
-	list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
+	report_enum = &hid->report_enum[HID_FEATURE_REPORT];
+	list_for_each_entry(report, &report_enum->report_list, list)
 		usbhid_submit_report(hid, report, USB_DIR_IN);
 
 	err = 0;
@@ -857,7 +805,7 @@ static int hid_find_field_early(struct hid_device *hid, unsigned int page,
 	return -1;
 }
 
-void usbhid_set_leds(struct hid_device *hid)
+static void usbhid_set_leds(struct hid_device *hid)
 {
 	struct hid_field *field;
 	int offset;
@@ -867,7 +815,6 @@ void usbhid_set_leds(struct hid_device *hid)
 		usbhid_submit_report(hid, field->report, USB_DIR_OUT);
 	}
 }
-EXPORT_SYMBOL_GPL(usbhid_set_leds);
 
 /*
  * Traverse the supplied list of reports and find the longest
@@ -1274,7 +1221,6 @@ static struct hid_ll_driver usb_hid_driver = {
 	.open = usbhid_open,
 	.close = usbhid_close,
 	.power = usbhid_power,
-	.hidinput_input_event = usb_hidinput_input_event,
 	.request = usbhid_request,
 	.wait = usbhid_wait_io,
 	.idle = usbhid_idle,
@@ -1368,8 +1314,6 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
 	setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
 	spin_lock_init(&usbhid->lock);
 
-	INIT_WORK(&usbhid->led_work, hid_led);
-
 	ret = hid_add_device(hid);
 	if (ret) {
 		if (ret != -ENODEV)
@@ -1402,7 +1346,6 @@ static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid)
 {
 	del_timer_sync(&usbhid->io_retry);
 	cancel_work_sync(&usbhid->reset_work);
-	cancel_work_sync(&usbhid->led_work);
 }
 
 static void hid_cease_io(struct usbhid_device *usbhid)
@@ -1522,15 +1465,17 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message)
 	struct usbhid_device *usbhid = hid->driver_data;
 	int status = 0;
 	bool driver_suspended = false;
+	unsigned int ledcount;
 
 	if (PMSG_IS_AUTO(message)) {
+		ledcount = hidinput_count_leds(hid);
 		spin_lock_irq(&usbhid->lock);	/* Sync with error handler */
 		if (!test_bit(HID_RESET_PENDING, &usbhid->iofl)
 		    && !test_bit(HID_CLEAR_HALT, &usbhid->iofl)
 		    && !test_bit(HID_OUT_RUNNING, &usbhid->iofl)
 		    && !test_bit(HID_CTRL_RUNNING, &usbhid->iofl)
 		    && !test_bit(HID_KEYS_PRESSED, &usbhid->iofl)
-		    && (!usbhid->ledcount || ignoreled))
+		    && (!ledcount || ignoreled))
 		{
 			set_bit(HID_SUSPENDED, &usbhid->iofl);
 			spin_unlock_irq(&usbhid->lock);

drivers/hid/usbhid/hid-quirks.c

@@ -109,6 +109,8 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_DUOSENSE, HID_QUIRK_NO_INIT_REPORTS },
+
 	{ 0, 0 }
 };
 

drivers/hid/usbhid/usbhid.h

@@ -92,9 +92,6 @@ struct usbhid_device {
 	unsigned int retry_delay;                                       /* Delay length in ms */
 	struct work_struct reset_work;                                  /* Task context for resets */
 	wait_queue_head_t wait;						/* For sleeping */
-	int ledcount;							/* counting the number of active leds */
-
-	struct work_struct led_work;					/* Task context for setting LEDs */
 };
 
 #define	hid_to_usb_dev(hid_dev) \

drivers/input/mouse/bcm5974.c

@@ -89,9 +89,9 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
 /* MacbookAir6,2 (unibody, June 2013) */
-#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
-#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
-#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0290
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0292
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\

include/linux/hid-sensor-hub.h

@@ -172,7 +172,7 @@ struct hid_sensor_common {
 	struct hid_sensor_hub_attribute_info sensitivity;
 };
 
-/*Convert from hid unit expo to regular exponent*/
+/* Convert from hid unit expo to regular exponent */
 static inline int hid_sensor_convert_exponent(int unit_expo)
 {
 	if (unit_expo < 0x08)

include/linux/hid-sensor-ids.h

@@ -37,7 +37,7 @@
 #define HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS			0x200458
 #define HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS			0x200459
 
-/*ORIENTATION: Compass 3D: (200083) */
+/* ORIENTATION: Compass 3D: (200083) */
 #define HID_USAGE_SENSOR_COMPASS_3D				0x200083
 #define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING			0x200471
 #define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING_X			0x200472

include/linux/hid.h

@@ -252,6 +252,8 @@ struct hid_item {
 #define HID_OUTPUT_REPORT	1
 #define HID_FEATURE_REPORT	2
 
+#define HID_REPORT_TYPES	3
+
 /*
  * HID connect requests
  */
@@ -283,6 +285,7 @@ struct hid_item {
 #define HID_QUIRK_MULTI_INPUT			0x00000040
 #define HID_QUIRK_HIDINPUT_FORCE		0x00000080
 #define HID_QUIRK_NO_EMPTY_INPUT		0x00000100
+#define HID_QUIRK_NO_INIT_INPUT_REPORTS		0x00000200
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
 #define HID_QUIRK_FULLSPEED_INTERVAL		0x10000000
 #define HID_QUIRK_NO_INIT_REPORTS		0x20000000
@@ -295,6 +298,7 @@ struct hid_item {
 #define HID_GROUP_GENERIC			0x0001
 #define HID_GROUP_MULTITOUCH			0x0002
 #define HID_GROUP_SENSOR_HUB			0x0003
+#define HID_GROUP_MULTITOUCH_WIN_8		0x0004
 
 /*
  * This is the global environment of the parser. This information is
@@ -393,14 +397,14 @@ struct hid_report {
 	struct hid_device *device;			/* associated device */
 };
 
+#define HID_MAX_IDS 256
+
 struct hid_report_enum {
 	unsigned numbered;
 	struct list_head report_list;
-	struct hid_report *report_id_hash[256];
+	struct hid_report *report_id_hash[HID_MAX_IDS];
 };
 
-#define HID_REPORT_TYPES 3
-
 #define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
 #define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
 #define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
@@ -456,6 +460,7 @@ struct hid_device {							/* device report descriptor */
 	enum hid_type type;						/* device type (mouse, kbd, ...) */
 	unsigned country;						/* HID country */
 	struct hid_report_enum report_enum[HID_REPORT_TYPES];
+	struct work_struct led_work;					/* delayed LED worker */
 
 	struct semaphore driver_lock;					/* protects the current driver, except during input */
 	struct semaphore driver_input_lock;				/* protects the current driver */
@@ -532,6 +537,8 @@ static inline void hid_set_drvdata(struct hid_device *hdev, void *data)
 #define HID_GLOBAL_STACK_SIZE 4
 #define HID_COLLECTION_STACK_SIZE 4
 
+#define HID_SCAN_FLAG_MT_WIN_8			0x00000001
+
 struct hid_parser {
 	struct hid_global     global;
 	struct hid_global     global_stack[HID_GLOBAL_STACK_SIZE];
@@ -540,6 +547,7 @@ struct hid_parser {
 	unsigned              collection_stack[HID_COLLECTION_STACK_SIZE];
 	unsigned              collection_stack_ptr;
 	struct hid_device    *device;
+	unsigned              scan_flags;
 };
 
 struct hid_class_descriptor {
@@ -744,6 +752,7 @@ struct hid_field *hidinput_get_led_field(struct hid_device *hid);
 unsigned int hidinput_count_leds(struct hid_device *hid);
 __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code);
 void hid_output_report(struct hid_report *report, __u8 *data);
+u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags);
 struct hid_device *hid_allocate_device(void);
 struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
 int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
@@ -989,7 +998,6 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
 u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct);
 int usbhid_quirks_init(char **quirks_param);
 void usbhid_quirks_exit(void);
-void usbhid_set_leds(struct hid_device *hid);
 
 #ifdef CONFIG_HID_PID
 int hid_pidff_init(struct hid_device *hid);

include/linux/hidraw.h

@@ -23,6 +23,7 @@ struct hidraw {
 	wait_queue_head_t wait;
 	struct hid_device *hid;
 	struct device *dev;
+	spinlock_t list_lock;
 	struct list_head list;
 };
 

include/linux/i2c/i2c-hid.h

@@ -19,7 +19,8 @@
  * @hid_descriptor_address: i2c register where the HID descriptor is stored.
  *
  * Note that it is the responsibility of the platform driver (or the acpi 5.0
- * driver) to setup the irq related to the gpio in the struct i2c_board_info.
+ * driver, or the flattened device tree) to setup the irq related to the gpio in
+ * the struct i2c_board_info.
  * The platform driver should also setup the gpio according to the device:
  *
  * A typical example is the following:

include/linux/mod_devicetable.h

@@ -277,7 +277,7 @@ struct pcmcia_device_id {
 #define INPUT_DEVICE_ID_KEY_MIN_INTERESTING	0x71
 #define INPUT_DEVICE_ID_KEY_MAX		0x2ff
 #define INPUT_DEVICE_ID_REL_MAX		0x0f
-#define INPUT_DEVICE_ID_ABS_MAX		0x3f
+#define INPUT_DEVICE_ID_ABS_MAX		0x4f
 #define INPUT_DEVICE_ID_MSC_MAX		0x07
 #define INPUT_DEVICE_ID_LED_MAX		0x0f
 #define INPUT_DEVICE_ID_SND_MAX		0x07

include/uapi/linux/input.h

@@ -716,6 +716,14 @@ struct input_keymap_entry {
 #define BTN_DPAD_LEFT		0x222
 #define BTN_DPAD_RIGHT		0x223
 
+#define BTN_FRET_FAR_UP		0x224
+#define BTN_FRET_UP		0x225
+#define BTN_FRET_MID		0x226
+#define BTN_FRET_LOW		0x227
+#define BTN_FRET_FAR_LOW	0x228
+#define BTN_STRUM_BAR_UP	0x229
+#define BTN_STRUM_BAR_DOWN	0x22a
+
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
 #define BTN_TRIGGER_HAPPY2		0x2c1
@@ -829,8 +837,21 @@ struct input_keymap_entry {
 #define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
 #define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
 
-
-#define ABS_MAX			0x3f
+/* Drums and guitars (mostly toys) */
+#define ABS_TOM_FAR_LEFT	0x40
+#define ABS_TOM_LEFT		0x41
+#define ABS_TOM_RIGHT		0x42
+#define ABS_TOM_FAR_RIGHT	0x43
+#define ABS_CYMBAL_FAR_LEFT	0x44
+#define ABS_CYMBAL_LEFT		0x45
+#define ABS_CYMBAL_RIGHT	0x46
+#define ABS_CYMBAL_FAR_RIGHT	0x47
+#define ABS_BASS		0x48
+#define ABS_HI_HAT		0x49
+#define ABS_FRET_BOARD		0x4a	/* Guitar fret board, vertical pos */
+#define ABS_WHAMMY_BAR		0x4b	/* Guitar whammy bar (or vibrato) */
+
+#define ABS_MAX			0x4f
 #define ABS_CNT			(ABS_MAX+1)
 
 /*

include/uapi/linux/uhid.h

@@ -30,7 +30,7 @@ enum uhid_event_type {
 	UHID_OPEN,
 	UHID_CLOSE,
 	UHID_OUTPUT,
-	UHID_OUTPUT_EV,
+	UHID_OUTPUT_EV,			/* obsolete! */
 	UHID_INPUT,
 	UHID_FEATURE,
 	UHID_FEATURE_ANSWER,
@@ -69,6 +69,8 @@ struct uhid_output_req {
 	__u8 rtype;
 } __attribute__((__packed__));
 
+/* Obsolete! Newer kernels will no longer send these events but instead convert
+ * it into raw output reports via UHID_OUTPUT. */
 struct uhid_output_ev_req {
 	__u16 type;
 	__u16 code;

net/bluetooth/hidp/core.c

@@ -225,17 +225,22 @@ static void hidp_input_report(struct hidp_session *session, struct sk_buff *skb)
 
 static int hidp_send_report(struct hidp_session *session, struct hid_report *report)
 {
-	unsigned char buf[32], hdr;
-	int rsize;
+	unsigned char hdr;
+	u8 *buf;
+	int rsize, ret;
 
-	rsize = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	if (rsize > sizeof(buf))
+	buf = hid_alloc_report_buf(report, GFP_ATOMIC);
+	if (!buf)
 		return -EIO;
 
 	hid_output_report(report, buf);
 	hdr = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
 
-	return hidp_send_intr_message(session, hdr, buf, rsize);
+	rsize = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+	ret = hidp_send_intr_message(session, hdr, buf, rsize);
+
+	kfree(buf);
+	return ret;
 }
 
 static int hidp_get_raw_report(struct hid_device *hid,

samples/hidraw/.gitignore

+hid-example

samples/uhid/uhid-example.c

 /*
  * UHID Example
  *
- * Copyright (c) 2012 David Herrmann <dh.herrmann@googlemail.com>
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
  *
  * The code may be used by anyone for any purpose,
  * and can serve as a starting point for developing
  * applications using uhid.
  */
 
-/* UHID Example
+/*
+ * UHID Example
  * This example emulates a basic 3 buttons mouse with wheel over UHID. Run this
  * program as root and then use the following keys to control the mouse:
  *   q: Quit the application
@@ -22,6 +23,11 @@
  *   r: Move wheel up
  *   f: Move wheel down
  *
+ * Additionally to 3 button mouse, 3 keyboard LEDs are also supported (LED_NUML,
+ * LED_CAPSL and LED_SCROLLL). The device doesn't generate any related keyboard
+ * events, though. You need to manually write the EV_LED/LED_XY/1 activation
+ * input event to the evdev device to see it being sent to this device.
+ *
  * If uhid is not available as /dev/uhid, then you can pass a different path as
  * first argument.
  * If <linux/uhid.h> is not installed in /usr, then compile this with:
@@ -41,11 +47,12 @@
 #include <unistd.h>
 #include <linux/uhid.h>
 
-/* HID Report Desciptor
- * We emulate a basic 3 button mouse with wheel. This is the report-descriptor
- * as the kernel will parse it:
+/*
+ * HID Report Desciptor
+ * We emulate a basic 3 button mouse with wheel and 3 keyboard LEDs. This is
+ * the report-descriptor as the kernel will parse it:
  *
- * INPUT[INPUT]
+ * INPUT(1)[INPUT]
  *   Field(0)
  *     Physical(GenericDesktop.Pointer)
  *     Application(GenericDesktop.Mouse)
@@ -72,6 +79,19 @@
  *     Report Count(3)
  *     Report Offset(8)
  *     Flags( Variable Relative )
+ * OUTPUT(2)[OUTPUT]
+ *   Field(0)
+ *     Application(GenericDesktop.Keyboard)
+ *     Usage(3)
+ *       LED.NumLock
+ *       LED.CapsLock
+ *       LED.ScrollLock
+ *     Logical Minimum(0)
+ *     Logical Maximum(1)
+ *     Report Size(1)
+ *     Report Count(3)
+ *     Report Offset(0)
+ *     Flags( Variable Absolute )
  *
  * This is the mapping that we expect:
  *   Button.0001 ---> Key.LeftBtn
@@ -80,19 +100,59 @@
  *   GenericDesktop.X ---> Relative.X
  *   GenericDesktop.Y ---> Relative.Y
  *   GenericDesktop.Wheel ---> Relative.Wheel
+ *   LED.NumLock ---> LED.NumLock
+ *   LED.CapsLock ---> LED.CapsLock
+ *   LED.ScrollLock ---> LED.ScrollLock
  *
  * This information can be verified by reading /sys/kernel/debug/hid/<dev>/rdesc
  * This file should print the same information as showed above.
  */
 
 static unsigned char rdesc[] = {
-	0x05, 0x01, 0x09, 0x02, 0xa1, 0x01, 0x09, 0x01,
-	0xa1, 0x00, 0x05, 0x09, 0x19, 0x01, 0x29, 0x03,
-	0x15, 0x00, 0x25, 0x01, 0x95, 0x03, 0x75, 0x01,
-	0x81, 0x02, 0x95, 0x01, 0x75, 0x05, 0x81, 0x01,
-	0x05, 0x01, 0x09, 0x30, 0x09, 0x31, 0x09, 0x38,
-	0x15, 0x80, 0x25, 0x7f, 0x75, 0x08, 0x95, 0x03,
-	0x81, 0x06, 0xc0, 0xc0,
+	0x05, 0x01,	/* USAGE_PAGE (Generic Desktop) */
+	0x09, 0x02,	/* USAGE (Mouse) */
+	0xa1, 0x01,	/* COLLECTION (Application) */
+	0x09, 0x01,		/* USAGE (Pointer) */
+	0xa1, 0x00,		/* COLLECTION (Physical) */
+	0x85, 0x01,			/* REPORT_ID (1) */
+	0x05, 0x09,			/* USAGE_PAGE (Button) */
+	0x19, 0x01,			/* USAGE_MINIMUM (Button 1) */
+	0x29, 0x03,			/* USAGE_MAXIMUM (Button 3) */
+	0x15, 0x00,			/* LOGICAL_MINIMUM (0) */
+	0x25, 0x01,			/* LOGICAL_MAXIMUM (1) */
+	0x95, 0x03,			/* REPORT_COUNT (3) */
+	0x75, 0x01,			/* REPORT_SIZE (1) */
+	0x81, 0x02,			/* INPUT (Data,Var,Abs) */
+	0x95, 0x01,			/* REPORT_COUNT (1) */
+	0x75, 0x05,			/* REPORT_SIZE (5) */
+	0x81, 0x01,			/* INPUT (Cnst,Var,Abs) */
+	0x05, 0x01,			/* USAGE_PAGE (Generic Desktop) */
+	0x09, 0x30,			/* USAGE (X) */
+	0x09, 0x31,			/* USAGE (Y) */
+	0x09, 0x38,			/* USAGE (WHEEL) */
+	0x15, 0x81,			/* LOGICAL_MINIMUM (-127) */
+	0x25, 0x7f,			/* LOGICAL_MAXIMUM (127) */
+	0x75, 0x08,			/* REPORT_SIZE (8) */
+	0x95, 0x03,			/* REPORT_COUNT (3) */
+	0x81, 0x06,			/* INPUT (Data,Var,Rel) */
+	0xc0,			/* END_COLLECTION */
+	0xc0,		/* END_COLLECTION */
+	0x05, 0x01,	/* USAGE_PAGE (Generic Desktop) */
+	0x09, 0x06,	/* USAGE (Keyboard) */
+	0xa1, 0x01,	/* COLLECTION (Application) */
+	0x85, 0x02,		/* REPORT_ID (2) */
+	0x05, 0x08,		/* USAGE_PAGE (Led) */
+	0x19, 0x01,		/* USAGE_MINIMUM (1) */
+	0x29, 0x03,		/* USAGE_MAXIMUM (3) */
+	0x15, 0x00,		/* LOGICAL_MINIMUM (0) */
+	0x25, 0x01,		/* LOGICAL_MAXIMUM (1) */
+	0x95, 0x03,		/* REPORT_COUNT (3) */
+	0x75, 0x01,		/* REPORT_SIZE (1) */
+	0x91, 0x02,		/* Output (Data,Var,Abs) */
+	0x95, 0x01,		/* REPORT_COUNT (1) */
+	0x75, 0x05,		/* REPORT_SIZE (5) */
+	0x91, 0x01,		/* Output (Cnst,Var,Abs) */
+	0xc0,		/* END_COLLECTION */
 };
 
 static int uhid_write(int fd, const struct uhid_event *ev)
@@ -140,6 +200,27 @@ static void destroy(int fd)
 	uhid_write(fd, &ev);
 }
 
+/* This parses raw output reports sent by the kernel to the device. A normal
+ * uhid program shouldn't do this but instead just forward the raw report.
+ * However, for ducomentational purposes, we try to detect LED events here and
+ * print debug messages for it. */
+static void handle_output(struct uhid_event *ev)
+{
+	/* LED messages are adverised via OUTPUT reports; ignore the rest */
+	if (ev->u.output.rtype != UHID_OUTPUT_REPORT)
+		return;
+	/* LED reports have length 2 bytes */
+	if (ev->u.output.size != 2)
+		return;
+	/* first byte is report-id which is 0x02 for LEDs in our rdesc */
+	if (ev->u.output.data[0] != 0x2)
+		return;
+
+	/* print flags payload */
+	fprintf(stderr, "LED output report received with flags %x\n",
+		ev->u.output.data[1]);
+}
+
 static int event(int fd)
 {
 	struct uhid_event ev;
@@ -174,6 +255,7 @@ static int event(int fd)
 		break;
 	case UHID_OUTPUT:
 		fprintf(stderr, "UHID_OUTPUT from uhid-dev\n");
+		handle_output(&ev);
 		break;
 	case UHID_OUTPUT_EV:
 		fprintf(stderr, "UHID_OUTPUT_EV from uhid-dev\n");
@@ -198,18 +280,19 @@ static int send_event(int fd)
 
 	memset(&ev, 0, sizeof(ev));
 	ev.type = UHID_INPUT;
-	ev.u.input.size = 4;
+	ev.u.input.size = 5;
 
+	ev.u.input.data[0] = 0x1;
 	if (btn1_down)
-		ev.u.input.data[0] |= 0x1;
+		ev.u.input.data[1] |= 0x1;
 	if (btn2_down)
-		ev.u.input.data[0] |= 0x2;
+		ev.u.input.data[1] |= 0x2;
 	if (btn3_down)
-		ev.u.input.data[0] |= 0x4;
+		ev.u.input.data[1] |= 0x4;
 
-	ev.u.input.data[1] = abs_hor;
-	ev.u.input.data[2] = abs_ver;
-	ev.u.input.data[3] = wheel;
+	ev.u.input.data[2] = abs_hor;
+	ev.u.input.data[3] = abs_ver;
+	ev.u.input.data[4] = wheel;
 
 	return uhid_write(fd, &ev);
 }