Commit 6424e0ae authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard

clk: sunxi: rewrite sun9i_a80_get_pll4_factors()

The old implementation of sun9i_a80_get_pll4_factors() has several issues,
it checks against 256 / 512 in various places where it should use 255 / 511,
it does the wrong thing for low frequencies which are an even multiple of
6 MHz, e.g. if you ask it for 72 MHz it will result in 144 Mhz, and it does
not take into account that n must be at least 12. Moreover it is quite hard
to read / follow it.

This commit rewrites it to be correct in all cases, and makes it much easier
to follow the code / to read.

Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 7a6fca87
......@@ -24,50 +24,51 @@
/**
* sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL1
* sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL4
* PLL4 rate is calculated as follows
* rate = (parent_rate * n >> p) / (m + 1);
* parent_rate is always 24Mhz
* parent_rate is always 24MHz
*
* p and m are named div1 and div2 in Allwinner's SDK
*/
static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
u8 *n, u8 *k, u8 *m, u8 *p)
u8 *n_ret, u8 *k, u8 *m_ret, u8 *p_ret)
{
int div;
int n;
int m = 1;
int p = 1;
/* Normalize value to a 6M multiple */
div = DIV_ROUND_UP(*freq, 6000000);
/* Normalize value to a 6 MHz multiple (24 MHz / 4) */
n = DIV_ROUND_UP(*freq, 6000000);
/* divs above 256 cannot be odd */
if (div > 256)
div = round_up(div, 2);
/* If n is too large switch to steps of 12 MHz */
if (n > 255) {
m = 0;
n = (n + 1) / 2;
}
/* If n is still too large switch to steps of 24 MHz */
if (n > 255) {
p = 0;
n = (n + 1) / 2;
}
/* divs above 512 must be a multiple of 4 */
if (div > 512)
div = round_up(div, 4);
/* n must be between 12 and 255 */
if (n > 255)
n = 255;
else if (n < 12)
n = 12;
*freq = 6000000 * div;
*freq = ((24000000 * n) >> p) / (m + 1);
/* we were called to round the frequency, we can now return */
if (n == NULL)
if (n_ret == NULL)
return;
/* p will be 1 for divs under 512 */
if (div < 512)
*p = 1;
else
*p = 0;
/* m will be 1 if div is odd */
if (div & 1)
*m = 1;
else
*m = 0;
/* calculate a suitable n based on m and p */
*n = div / (*p + 1) / (*m + 1);
*n_ret = n;
*m_ret = m;
*p_ret = p;
}
static struct clk_factors_config sun9i_a80_pll4_config = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment