Commit 64318334 authored by Ben Hutchings's avatar Ben Hutchings Committed by David S. Miller

cxgb3: Use generic XENPAK LASI register definitions

Signed-off-by: default avatarBen Hutchings <bhutchings@solarflare.com>
Acked-by: default avatarDivy Le Ray <divy@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent aa22437e
......@@ -1007,7 +1007,8 @@ static int ael2005_reset(struct cphy *phy, int wait)
int err;
unsigned int lasi_ctrl;
err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, LASI_CTRL, &lasi_ctrl);
err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
&lasi_ctrl);
if (err)
return err;
......
......@@ -521,16 +521,6 @@ enum {
MAC_RXFIFO_SIZE = 32768
};
/* LASI control and status registers */
enum {
RX_ALARM_CTRL = 0x9000,
TX_ALARM_CTRL = 0x9001,
LASI_CTRL = 0x9002,
RX_ALARM_STAT = 0x9003,
TX_ALARM_STAT = 0x9004,
LASI_STAT = 0x9005
};
/* PHY loopback direction */
enum {
PHY_LOOPBACK_TX = 1,
......
......@@ -472,29 +472,31 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
int t3_phy_lasi_intr_enable(struct cphy *phy)
{
return t3_mdio_write(phy, MDIO_MMD_PMAPMD, LASI_CTRL, 1);
return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
MDIO_PMA_LASI_LSALARM);
}
int t3_phy_lasi_intr_disable(struct cphy *phy)
{
return t3_mdio_write(phy, MDIO_MMD_PMAPMD, LASI_CTRL, 0);
return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0);
}
int t3_phy_lasi_intr_clear(struct cphy *phy)
{
u32 val;
return t3_mdio_read(phy, MDIO_MMD_PMAPMD, LASI_STAT, &val);
return t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
}
int t3_phy_lasi_intr_handler(struct cphy *phy)
{
unsigned int status;
int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, LASI_STAT, &status);
int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT,
&status);
if (err)
return err;
return (status & 1) ? cphy_cause_link_change : 0;
return (status & MDIO_PMA_LASI_LSALARM) ? cphy_cause_link_change : 0;
}
static const struct adapter_info t3_adap_info[] = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment