Skip to content

L
linux
Commit 64553593 authored by Anton Blanchard's avatar Anton Blanchard
Browse files
Options

Merge samba.org:/scratch/anton/linux-2.5 

into samba.org:/scratch/anton/tmp3
parents afb753ea 6cf73674
Hide whitespace changes
Inline Side-by-side
Showing with 762 additions and 545 deletions
Makefile
View file @ 64553593
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 0
EXTRAVERSION = -test3
EXTRAVERSION = -test4
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
......
arch/ppc/8260_io/uart.c
View file @ 64553593
......@@ -50,6 +50,10 @@
#include <asm/cpm_8260.h>
#include <asm/irq.h>
#ifdef CONFIG_MAGIC_SYSRQ
#include <linux/sysrq.h>
#endif
#ifdef CONFIG_SERIAL_CONSOLE
#include <linux/console.h>
......@@ -77,6 +81,14 @@ static char *serial_version = "0.02";
static struct tty_driver *serial_driver;
static int serial_console_setup(struct console *co, char *options);
static void serial_console_write(struct console *c, const char *s,
unsigned count);
static kdev_t serial_console_device(struct console *c);
#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
static unsigned long break_pressed; /* break, really ... */
#endif
/*
* Serial driver configuration section. Here are the various options:
*/
......@@ -208,6 +220,15 @@ typedef struct serial_info {
cbd_t *tx_cur;
} ser_info_t;
static struct console sercons = {
.name = "ttyS",
.write = serial_console_write,
.device = serial_console_device,
.setup = serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = CONFIG_SERIAL_CONSOLE_PORT,
};
static void change_speed(ser_info_t *info);
static void rs_8xx_wait_until_sent(struct tty_struct *tty, int timeout);
......@@ -328,7 +349,7 @@ static _INLINE_ void rs_sched_event(ser_info_t *info,
schedule_work(&info->tqueue);
}
static _INLINE_ void receive_chars(ser_info_t *info)
static _INLINE_ void receive_chars(ser_info_t *info, struct pt_regs *regs)
{
struct tty_struct *tty = info->tty;
unsigned char ch, *cp;
......@@ -450,6 +471,19 @@ static _INLINE_ void receive_chars(ser_info_t *info)
}
}
}
#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
if (break_pressed && info->line == sercons.index) {
if (ch != 0 && time_before(jiffies,
break_pressed + HZ*5)) {
handle_sysrq(ch, regs, NULL, NULL);
break_pressed = 0;
goto ignore_char;
} else
break_pressed = 0;
}
#endif
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
break;
......@@ -458,6 +492,10 @@ static _INLINE_ void receive_chars(ser_info_t *info)
tty->flip.count++;
}
#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
ignore_char:
#endif
/* This BD is ready to be used again. Clear status.
* Get next BD.
*/
......@@ -475,7 +513,36 @@ static _INLINE_ void receive_chars(ser_info_t *info)
schedule_delayed_work(&tty->flip.work, 1);
}
static _INLINE_ void transmit_chars(ser_info_t *info)
static _INLINE_ void receive_break(ser_info_t *info, struct pt_regs *regs)
{
struct tty_struct *tty = info->tty;
info->state->icount.brk++;
#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
if (info->line == sercons.index) {
if (!break_pressed) {
break_pressed = jiffies;
return;
} else
break_pressed = 0;
}
#endif
/* Check to see if there is room in the tty buffer for
* the break. If not, we exit now, losing the break. FIXME
*/
if ((tty->flip.count + 1) >= TTY_FLIPBUF_SIZE)
return;
*(tty->flip.flag_buf_ptr++) = TTY_BREAK;
*(tty->flip.char_buf_ptr++) = 0;
tty->flip.count++;
queue_task(&tty->flip.tqueue, &tq_timer);
}
static _INLINE_ void transmit_chars(ser_info_t *info, struct pt_regs *regs)
{
if (info->flags & TX_WAKEUP) {
......@@ -575,19 +642,23 @@ static irqreturn_t rs_8xx_interrupt(int irq, void * dev_id, struct pt_regs * reg
if ((idx = info->state->smc_scc_num) < SCC_NUM_BASE) {
smcp = &immr->im_smc[idx];
events = smcp->smc_smce;
if (events & SMCM_BRKE)
receive_break(info, regs);
if (events & SMCM_RX)
receive_chars(info);
receive_chars(info, regs);
if (events & SMCM_TX)
transmit_chars(info);
transmit_chars(info, regs);
smcp->smc_smce = events;
}
else {
sccp = &immr->im_scc[idx - SCC_IDX_BASE];
events = sccp->scc_scce;
if (events & SMCM_BRKE)
receive_break(info, regs);
if (events & SCCM_RX)
receive_chars(info);
receive_chars(info, regs);
if (events & SCCM_TX)
transmit_chars(info);
transmit_chars(info, regs);
sccp->scc_scce = events;
}
......@@ -2207,7 +2278,7 @@ static void my_console_write(int idx, const char *s,
static void serial_console_write(struct console *c, const char *s,
unsigned count)
{
#if defined(CONFIG_KGDB) && !defined(CONFIG_USE_SERIAL2_KGDB)
#if defined(CONFIG_KGDB_CONSOLE) && !defined(CONFIG_USE_SERIAL2_KGDB)
/* Try to let stub handle output. Returns true if it did. */
if (kgdb_output_string(s, count))
return;
......@@ -2397,16 +2468,6 @@ static kdev_t serial_console_device(struct console *c)
return serial_driver;
}
static struct console sercons = {
.name = "ttyS",
.write = serial_console_write,
.device = serial_console_device,
.setup = serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = CONFIG_SERIAL_CONSOLE_PORT,
};
/*
* Register console.
*/
......
arch/ppc/8xx_io/uart.c
View file @ 64553593
......@@ -1068,7 +1068,7 @@ static int rs_8xx_write(struct tty_struct * tty, int from_user,
volatile cbd_t *bdp;
unsigned char *cp;
#ifdef CONFIG_KGDB
#ifdef CONFIG_KGDB_CONSOLE
/* Try to let stub handle output. Returns true if it did. */
if (kgdb_output_string(buf, count))
return ret;
......@@ -2271,7 +2271,7 @@ static void my_console_write(int idx, const char *s,
static void serial_console_write(struct console *c, const char *s,
unsigned count)
{
#ifdef CONFIG_KGDB
#ifdef CONFIG_KGDB_CONSOLE
/* Try to let stub handle output. Returns true if it did. */
if (kgdb_output_string(s, count))
return;
......
arch/ppc/Kconfig
View file @ 64553593
......@@ -1426,20 +1426,12 @@ config DEBUG_SPINLOCK_SLEEP
config KGDB
bool "Include kgdb kernel debugger"
depends on DEBUG_KERNEL
select DEBUG_INFO
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
Unless you are intending to debug the kernel, say N here.
config DEBUG_INFO
bool "Compile the kernel with debug info"
depends on DEBUG_KERNEL
help
If you say Y here the resulting kernel image will include
debugging info resulting in a larger kernel image.
Say Y here only if you plan to use gdb to debug the kernel.
If you don't debug the kernel, you can say N.
choice
prompt "Serial Port"
depends on KGDB
......@@ -1459,6 +1451,14 @@ config KGDB_TTYS3
endchoice
config KGDB_CONSOLE
bool "Enable serial console thru kgdb port"
depends on KGDB && 8xx || 8260
help
If you enable this, all serial console messages will be sent
over the gdb stub.
If unsure, say N.
config XMON
bool "Include xmon kernel debugger"
depends on DEBUG_KERNEL
......@@ -1474,18 +1474,16 @@ config BDI_SWITCH
Unless you are intending to debug the kernel with one of these
machines, say N here.
config MORE_COMPILE_OPTIONS
bool "Add any additional compile options"
depends on DEBUG_KERNEL && (KGDB || XMON || BDI_SWITCH)
config DEBUG_INFO
bool "Compile the kernel with debug info"
depends on DEBUG_KERNEL
default y if BDI_SWITCH || XMON
help
If you want to add additional CFLAGS to the kernel build, such as -g
for KGDB or the BDI2000, enable this option and then enter what you
would like to add in the next question.
config COMPILE_OPTIONS
string "Additional compile arguments"
depends on MORE_COMPILE_OPTIONS
default "-g -ggdb"
If you say Y here the resulting kernel image will include
debugging info resulting in a larger kernel image.
Say Y here only if you plan to use some sort of debugger to
debug the kernel.
If you don't debug the kernel, you can say N.
config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)"
......
arch/ppc/Makefile
View file @ 64553593
......@@ -22,9 +22,6 @@ CPP = $(CC) -E $(CFLAGS)
cflags-$(CONFIG_4xx) += -Wa,-m405
cflags-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge
# Use sed to remove the quotes.
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
CFLAGS += $(cflags-y)
......
arch/ppc/boot/common/ns16550.c
View file @ 64553593
......@@ -60,7 +60,7 @@ unsigned long serial_init(int chan, void *ignored)
else {
/* Input clock. */
outb(com_port + (UART_DLL << shift),
(BASE_BAUD / SERIAL_BAUD));
(BASE_BAUD / SERIAL_BAUD) & 0xFF);
outb(com_port + (UART_DLM << shift),
(BASE_BAUD / SERIAL_BAUD) >> 8);
/* 8 data, 1 stop, no parity */
......
arch/ppc/boot/common/util.S
View file @ 64553593
......@@ -160,9 +160,22 @@ _setup_L3CR:
blr
/* udelay (on non-601 processors) needs to know the period of the
* timebase in nanoseconds. This used to be hardcoded to be 60ns
* (period of 66MHz/4). Now a variable is used that is initialized to
* 60 for backward compatibility, but it can be overridden as necessary
* with code something like this:
* extern unsigned long timebase_period_ns;
* timebase_period_ns = 1000000000 / bd->bi_tbfreq;
*/
.data
.globl timebase_period_ns
timebase_period_ns:
.long 60
.text
/*
* Delay for a number of microseconds
* -- Use the BUS timer (assumes 66MHz)
*/
.globl udelay
udelay:
......@@ -180,8 +193,13 @@ udelay:
.udelay_not_601:
mulli r4,r3,1000 /* nanoseconds */
addi r4,r4,59
li r5,60
/* Change r4 to be the number of ticks using:
* (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
* timebase_period_ns defaults to 60 (16.6MHz) */
lis r5,timebase_period_ns@h
lwz r5,timebase_period_ns@l(r5)
addi r4,r4,r5
addi r4,r4,-1
divw r4,r4,r5 /* BUS ticks */
1: mftbu r5
mftb r6
......
arch/ppc/boot/simple/Makefile
View file @ 64553593
......@@ -22,7 +22,6 @@
# get_mem_size(), which is memory controller dependent. Add in the correct
# XXX_memory.o file for this to work, as well as editing the $(MISC) file.
boot: zImage
boot := arch/ppc/boot
common := $(boot)/common
......@@ -32,86 +31,90 @@ images := $(boot)/images
# Normally, we use the 'misc.c' file for decompress_kernel and
# whatnot. Sometimes we need to override this however.
MISC := misc.o
ifeq ($(CONFIG_IBM_OPENBIOS),y)
ZIMAGE := zImage-TREE
ZIMAGEINITRD := zImage.initrd-TREE
END := treeboot
TFTPIMAGE := /tftpboot/zImage.$(END)
MISC := misc-embedded.o
endif
ifeq ($(CONFIG_EMBEDDEDBOOT),y)
TFTPIMAGE := /tftpboot/zImage.embedded
MISC := misc-embedded.o
endif
ifeq ($(CONFIG_EBONY),y)
ZIMAGE := zImage-TREE
ZIMAGEINITRD := zImage.initrd-TREE
END := ebony
ENTRYPOINT := 0x01000000
TFTPIMAGE := /tftpboot/zImage.$(END)
endif
ifeq ($(CONFIG_EV64260),y)
EXTRA := misc-ev64260.o
TFTPIMAGE := /tftpboot/zImage.ev64260
endif
ifeq ($(CONFIG_GEMINI),y)
ZIMAGE := zImage-STRIPELF
ZIMAGEINITRD := zImage.initrd-STRIPELF
END := gemini
TFTPIMAGE := /tftpboot/zImage.$(END)
endif
ifeq ($(CONFIG_K2),y)
EXTRA := legacy.o
TFTPIMAGE := /tftpboot/zImage.k2
endif
# kbuild-2.4 'feature', only one of these will ever by 'y' at a time.
misc-y := misc.o
#
# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
# for definition of what platform each config option refer to.
#----------------------------------------------------------------------------
zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE
zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE
end-$(CONFIG_IBM_OPENBIOS) := treeboot
tftpimage-$(CONFIG_IBM_OPENBIOS) := /tftpboot/zImage.$(end-y)
misc-$(CONFIG_IBM_OPENBIOS) := misc-embedded.o
tftpimage-$(CONFIG_EMBEDDEDBOOT) := /tftpboot/zImage.embedded
misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o
zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
extra.o-$(CONFIG_EBONY) := direct.o
end-$(CONFIG_EBONY) := ebony
entrypoint-$(CONFIG_EBONY) := 0x01000000
tftpimage-$(CONFIG_EBONY) := /tftpboot/zImage.$(end-y)
extra.o-$(CONFIG_EV64260) := direct.o misc-ev64260.o
tftpimage-$(CONFIG_EV64260) := /tftpboot/zImage.ev64260
zimage-$(CONFIG_GEMINI) := zImage-STRIPELF
zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF
end-$(CONFIG_GEMINI) := gemini
tftpimage-$(CONFIG_GEMINI) := /tftpboot/zImage.$(end-y)
extra.o-$(CONFIG_K2) := legacy.o
tftpimage-$(CONFIG_K2) := /tftpboot/zImage.k2
# kconfig 'feature', only one of these will ever by 'y' at a time.
# The rest will be unset.
ifeq ($(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750)$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS),y)
ZIMAGE := zImage-PPLUS
ZIMAGEINITRD := zImage.initrd-PPLUS
TFTPIMAGE := /tftpboot/zImage.pplus
ZNETBOOT := zImage.pplus
ZNETBOOTRD := zImage.initrd.pplus
endif
ifeq ($(CONFIG_PPLUS),y)
EXTRA := legacy.o
endif
ifeq ($(CONFIG_PCORE)$(CONFIG_POWERPMC250),y)
ZIMAGE := zImage-STRIPELF
ZIMAGEINITRD := zImage.initrd-STRIPELF
EXTRA := chrpmap.o
END := pcore
TFTPIMAGE := /tftpboot/zImage.$(END)
endif
ifeq ($(CONFIG_SANDPOINT),y)
TFTPIMAGE := /tftpboot/zImage.sandpoint
endif
ifeq ($(CONFIG_SPRUCE),y)
ZIMAGE := zImage-TREE
ZIMAGEINITRD := zImage.initrd-TREE
END := spruce
ENTRYPOINT := 0x00800000
MISC := misc-spruce.o
TFTPIMAGE := /tftpboot/zImage.$(END)
endif
ifeq ($(CONFIG_SMP),y)
TFTPIMAGE += .smp
endif
ifeq ($(CONFIG_REDWOOD_4),y)
multi := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
zimage-$(multi) := zImage-PPLUS
zimageinitrd-$(multi) := zImage.initrd-PPLUS
tftpimage-$(multi) := /tftpboot/zImage.pplus
znetboot-$(multi) := zImage.pplus
znetbootrd-$(multi) := zImage.initrd.pplus
# Overrides previous assingment
extra.o-$(CONFIG_PPLUS) := legacy.o
zimage-$(CONFIG_PCORE) := zImage-STRIPELF
zimageinitrd-$(CONFIG_PCORE) := zImage.initrd-STRIPELF
extra.o-$(CONFIG_PCORE) := chrpmap.o
end-$(CONFIG_PCORE) := pcore
tftpimage-$(CONFIG_PCORE) := /tftpboot/zImage.$(end-y)
zimage-$(CONFIG_POWERPMC250) := zImage-STRIPELF
zimageinitrd-$(CONFIG_POWERPMC250) := zImage.initrd-STRIPELF
extra.o-$(CONFIG_POWERPMC250) := chrpmap.o
end-$(CONFIG_POWERPMC250) := pcore
tftpimage-$(CONFIG_POWERPMC250) := /tftpboot/zImage.$(end-y)
tftpimage-$(CONFIG_SANDPOINT) := /tftpboot/zImage.sandpoint
zimage-$(CONFIG_SPRUCE) := zImage-TREE
zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE
end-$(CONFIG_SPRUCE) := spruce
entrypoint-$(CONFIG_SPRUCE) := 0x00800000
misc-$(CONFIG_SPRUCE) := misc-spruce.o
tftpimage-$(CONFIG_SPRUCE) := /tftpboot/zImage.$(end-y)
# tftp image is prefixed with .smp if compiled for SMP
tftpimage-$(CONFIG_SMP) += .smp
# This is a treeboot that needs init functions until the
# boot rom is sorted out (i.e. this is short lived)
EXTRA_AFLAGS := -Wa,-m405
EXTRA := rw4/rw4_init.o rw4/rw4_init_brd.o
endif
extra-aflags-$(CONFIG_REDWOOD_4) := -Wa,-m405
extra.o-$(CONFIG_REDWOOD_4) := rw4/rw4_init.o rw4/rw4_init_brd.o
EXTRA_AFLAGS := $(extra-aflags-y)
# Linker args. This specifies where the image will be run at.
LD_ARGS = -T $(boot)/ld.script \
-Ttext $(CONFIG_BOOT_LOAD) -Bstatic
LD_ARGS := -T $(boot)/ld.script \
-Ttext $(CONFIG_BOOT_LOAD) -Bstatic
OBJCOPY_ARGS := -O elf32-powerpc
# head.o and relocate.o must be at the start.
boot-y := head.o relocate.o $(EXTRA) $(MISC)
boot-y := head.o relocate.o $(extra.o-y) $(misc-y)
boot-$(CONFIG_40x) += embed_config.o
boot-$(CONFIG_8xx) += embed_config.o
boot-$(CONFIG_8260) += embed_config.o
......@@ -160,40 +163,40 @@ $(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(boot)/ld.script \
-R .stabstr -R .sysmap
# Sort-of dummy rules, that let us format the image we want.
zImage: $(images)/$(ZIMAGE) $(obj)/zvmlinux
zImage: $(images)/$(zimage-y) $(obj)/zvmlinux
cp -f $(obj)/zvmlinux $(images)/zImage.elf
rm -f $(obj)/zvmlinux
zImage.initrd: $(images)/$(ZIMAGEINITRD) $(obj)/zvmlinux.initrd
zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd
cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf
rm -f $(obj)/zvmlinux.initrd
znetboot: zImage
ifneq ($(ZNETBOOT),)
cp $(images)/$(ZNETBOOT) $(TFTPIMAGE)
cp $(images)/$(ZNETBOOT) $(tftpimage-y)
else
cp $(images)/zImage.* $(TFTPIMAGE)
cp $(images)/zImage.* $(tftpimage-y)
endif
znetboot.initrd: zImage.initrd
ifneq ($(ZNETBOOTRD),)
cp $(images)/$(ZNETBOOTRD) $(TFTPIMAGE)
ifneq ($(znetbootrd-y),)
cp $(images)/$(znetbootrd-y) $(tftpimage-y)
else
cp $(images)/zImage.* $(TFTPIMAGE)
cp $(images)/zImage.* $(tftpimage-y)
endif
$(images)/zImage-STRIPELF: $(obj)/zvmlinux
dd if=$(obj)/zvmlinux of=$(images)/zImage.$(END) skip=64 bs=1k
dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k
$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd
dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(END) \
dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \
skip=64 bs=1k
$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(END) $(ENTRYPOINT)
$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(ENTRYPOINT)
$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(END) \
$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
$(ENTRYPOINT)
$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
......
arch/ppc/boot/simple/embed_config.c
View file @ 64553593
......@@ -20,6 +20,7 @@
#ifdef CONFIG_40x
#include <asm/io.h>
#endif
extern unsigned long timebase_period_ns;
/* For those boards that don't provide one.
*/
......@@ -768,6 +769,7 @@ embed_config(bd_t **bdp)
#if defined(CONFIG_REDWOOD_5) || defined (CONFIG_REDWOOD_6)
bd->bi_tbfreq = 27 * 1000 * 1000;
#endif
timebase_period_ns = 1000000000 / bd->bi_tbfreq;
}
#endif /* CONFIG_BEECH */
#endif /* CONFIG_IBM_OPENBIOS */
......
arch/ppc/boot/simple/misc-embedded.c
View file @ 64553593
......@@ -75,7 +75,7 @@ extern void gunzip(void *, int, unsigned char *, int *);
extern void embed_config(bd_t **bp);
unsigned long
decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp)
load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp)
{
char *cp, ch;
int timer = 0, zimage_size;
......
arch/ppc/boot/simple/misc-spruce.c
View file @ 64553593
......@@ -147,7 +147,7 @@ unsigned long isa_io_base = SPRUCE_ISA_IO_BASE;
#define MEM_B2EA 0x60
unsigned long
decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
load_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
{
int timer = 0;
char *cp, ch;
......
arch/ppc/boot/simple/misc.c
View file @ 64553593
......@@ -252,3 +252,10 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
return (struct bi_record *)rec_loc;
}
/* Allow decompress_kernel to be hooked into. This is the default. */
void * __attribute__ ((weak))
load_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
{
return decompress_kernel(load_addr, num_words, cksum);
}
arch/ppc/boot/simple/relocate.S
View file @ 64553593
......@@ -183,7 +183,7 @@ start_ldr:
mr r4,r7 /* Program length */
mr r5,r6 /* Checksum */
mr r6,r11 /* Residual data */
bl decompress_kernel
bl load_kernel
/*
* Make sure the kernel knows we don't have things set in
......
arch/ppc/boot/utils/mktree.c
View file @ 64553593
......@@ -86,7 +86,7 @@ int main(int argc, char *argv[])
}
cksum = 0;
cp = (uint *)&bt;
cp = (void *)&bt;
for (i=0; i<sizeof(bt)/sizeof(uint); i++)
cksum += *cp++;
......
arch/ppc/configs/common_defconfig
View file @ 64553593
......@@ -9,6 +9,7 @@ CONFIG_HAVE_DEC_LOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set
#
# General setup
......@@ -18,9 +19,15 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
......@@ -86,8 +93,8 @@ CONFIG_TAU=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -125,6 +132,11 @@ CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
......@@ -144,10 +156,12 @@ CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# Multi-device support (RAID and LVM)
......@@ -155,40 +169,38 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
......@@ -198,12 +210,12 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
......@@ -212,15 +224,17 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
# SCSI device support
#
CONFIG_SCSI=y
......@@ -260,8 +274,6 @@ CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
......@@ -270,11 +282,8 @@ CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
......@@ -287,7 +296,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_MESH=y
......@@ -321,8 +329,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -339,6 +345,16 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
......@@ -355,6 +371,7 @@ CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
......@@ -386,8 +403,6 @@ CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_ARPTABLES is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -397,8 +412,6 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -482,6 +495,7 @@ CONFIG_PCNET32=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -553,7 +567,7 @@ CONFIG_NET_WIRELESS=y
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CIRRUS=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
......@@ -605,11 +619,6 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
......@@ -636,6 +645,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
......@@ -703,10 +713,12 @@ CONFIG_I2C_CHARDEV=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
......@@ -718,6 +730,7 @@ CONFIG_I2C_CHARDEV=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_I2C_SENSOR is not set
......@@ -913,13 +926,70 @@ CONFIG_NLS_ISO8859_1=m
# Sound
#
CONFIG_SOUND=m
CONFIG_DMASOUND_AWACS=m
CONFIG_DMASOUND=m
# CONFIG_DMASOUND_AWACS is not set
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA PowerMac devices
#
CONFIG_SND_POWERMAC=m
#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m
#
# Open Sound System
......@@ -998,6 +1068,7 @@ CONFIG_USB_SCANNER=m
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
......@@ -1074,7 +1145,6 @@ CONFIG_ZLIB_DEFLATE=y
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
CONFIG_BOOTX_TEXT=y
#
......
arch/ppc/configs/ibmchrp_defconfig
View file @ 64553593
......@@ -9,6 +9,7 @@ CONFIG_HAVE_DEC_LOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set
#
# General setup
......@@ -18,9 +19,15 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
......@@ -83,8 +90,8 @@ CONFIG_HIGHMEM=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -115,6 +122,10 @@ CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Generic Driver Options
#
#
# Memory Technology Devices (MTD)
#
......@@ -134,10 +145,12 @@ CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# Multi-device support (RAID and LVM)
......@@ -145,12 +158,12 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI support
# SCSI device support
#
CONFIG_SCSI=y
......@@ -183,8 +196,6 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
......@@ -193,11 +204,8 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
......@@ -210,7 +218,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
......@@ -242,8 +249,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -260,6 +265,16 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
......@@ -276,6 +291,7 @@ CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
......@@ -306,10 +322,9 @@ CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -319,8 +334,6 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -396,6 +409,7 @@ CONFIG_PCNET32=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -494,11 +508,6 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
......@@ -525,6 +534,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
......@@ -791,7 +801,6 @@ CONFIG_NLS_ISO8859_1=m
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
# CONFIG_BOOTX_TEXT is not set
#
......
arch/ppc/configs/mcpn765_defconfig
View file @ 64553593
......@@ -19,6 +19,7 @@ CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
......@@ -74,8 +75,8 @@ CONFIG_HIGHMEM=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
......@@ -103,6 +104,11 @@ CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
......@@ -122,10 +128,12 @@ CONFIG_BOOT_LOAD=0x00800000
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# Multi-device support (RAID and LVM)
......@@ -133,12 +141,12 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI support
# SCSI device support
#
# CONFIG_SCSI is not set
......@@ -319,11 +327,6 @@ CONFIG_NET_PCI=y
#
# CONFIG_FB is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
......@@ -526,7 +529,6 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
#
......
arch/ppc/configs/pmac_defconfig
View file @ 64553593
......@@ -9,6 +9,7 @@ CONFIG_HAVE_DEC_LOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set
#
# General setup
......@@ -18,9 +19,15 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
......@@ -79,6 +86,7 @@ CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_PROC_INTF=y
CONFIG_CPU_FREQ_24_API=y
CONFIG_CPU_FREQ_PMAC=y
......@@ -90,8 +98,8 @@ CONFIG_CPU_FREQ_PMAC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -101,9 +109,9 @@ CONFIG_HOTPLUG=y
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_YENTA=m
CONFIG_CARDBUS=y
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
#
......@@ -130,6 +138,11 @@ CONFIG_TASK_SIZE_BOOL=y
CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
......@@ -149,10 +162,12 @@ CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# Multi-device support (RAID and LVM)
......@@ -160,41 +175,39 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
......@@ -204,12 +217,12 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
......@@ -218,15 +231,17 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
# SCSI device support
#
CONFIG_SCSI=y
......@@ -266,8 +281,6 @@ CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
......@@ -276,11 +289,8 @@ CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
......@@ -293,7 +303,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_MESH=y
......@@ -361,8 +370,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -379,6 +386,16 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
......@@ -395,6 +412,7 @@ CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
......@@ -425,10 +443,9 @@ CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -438,8 +455,6 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -516,6 +531,7 @@ CONFIG_PCNET32=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -568,6 +584,7 @@ CONFIG_APPLE_AIRPORT=m
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_NET_WIRELESS=y
#
......@@ -637,25 +654,18 @@ CONFIG_IRTTY_SIR=m
#
# Old SIR device drivers
#
# CONFIG_IRTTY_OLD is not set
# CONFIG_IRPORT_SIR is not set
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_OLD is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_OLD is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
#
......@@ -720,11 +730,6 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
......@@ -766,7 +771,7 @@ CONFIG_ADB_PMU=y
CONFIG_PMAC_PBOOK=y
CONFIG_PMAC_APM_EMU=y
CONFIG_PMAC_BACKLIGHT=y
CONFIG_MAC_FLOPPY=y
# CONFIG_MAC_FLOPPY is not set
CONFIG_MAC_SERIAL=y
CONFIG_ADB=y
CONFIG_ADB_MACIO=y
......@@ -808,10 +813,12 @@ CONFIG_I2C_CHARDEV=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
......@@ -823,6 +830,7 @@ CONFIG_I2C_CHARDEV=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_I2C_SENSOR is not set
......@@ -1028,8 +1036,7 @@ CONFIG_NLS_ISO8859_1=m
# Sound
#
CONFIG_SOUND=m
CONFIG_DMASOUND_AWACS=m
CONFIG_DMASOUND=m
# CONFIG_DMASOUND_AWACS is not set
#
# Advanced Linux Sound Architecture
......@@ -1168,6 +1175,7 @@ CONFIG_USB_SCANNER=m
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
......@@ -1231,7 +1239,6 @@ CONFIG_ZLIB_DEFLATE=y
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
CONFIG_BOOTX_TEXT=y
#
......
arch/ppc/configs/power3_defconfig
View file @ 64553593
......@@ -9,6 +9,7 @@ CONFIG_HAVE_DEC_LOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set
#
# General setup
......@@ -18,9 +19,15 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
......@@ -82,8 +89,8 @@ CONFIG_HIGHMEM=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -120,6 +127,10 @@ CONFIG_TASK_SIZE_BOOL=y
CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# Generic Driver Options
#
#
# Memory Technology Devices (MTD)
#
......@@ -140,10 +151,12 @@ CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# Multi-device support (RAID and LVM)
......@@ -156,14 +169,15 @@ CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_IOCTL_V4=y
#
# ATA/IDE/MFM/RLL support
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI support
# SCSI device support
#
CONFIG_SCSI=y
......@@ -196,8 +210,6 @@ CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
......@@ -206,13 +218,10 @@ CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
......@@ -225,7 +234,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
......@@ -257,7 +265,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -274,7 +281,9 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -284,8 +293,6 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -362,6 +369,7 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -463,11 +471,6 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
......@@ -495,6 +498,7 @@ CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
......@@ -554,9 +558,8 @@ CONFIG_PRINTER=m
#
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_ELEKTOR is not set
......@@ -566,10 +569,12 @@ CONFIG_I2C_CHARDEV=y
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
......@@ -581,6 +586,7 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_I2C_SENSOR is not set
......@@ -843,7 +849,6 @@ CONFIG_SND_CS4281=m
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
CONFIG_BOOTX_TEXT=y
#
......
arch/ppc/defconfig
View file @ 64553593
......@@ -9,6 +9,7 @@ CONFIG_HAVE_DEC_LOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set
#
# General setup
......@@ -18,9 +19,15 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
......@@ -78,6 +85,7 @@ CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_PROC_INTF=y
CONFIG_CPU_FREQ_24_API=y
CONFIG_CPU_FREQ_PMAC=y
......@@ -89,8 +97,8 @@ CONFIG_CPU_FREQ_PMAC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -127,6 +135,11 @@ CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
......@@ -146,10 +159,12 @@ CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# Multi-device support (RAID and LVM)
......@@ -157,40 +172,38 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
......@@ -200,12 +213,12 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
......@@ -213,15 +226,17 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
# SCSI device support
#
CONFIG_SCSI=y
......@@ -261,8 +276,6 @@ CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
......@@ -271,11 +284,8 @@ CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
......@@ -288,7 +298,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_MESH=y
......@@ -322,8 +331,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -340,6 +347,16 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
......@@ -356,6 +373,7 @@ CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
......@@ -386,10 +404,9 @@ CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -399,8 +416,6 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -477,6 +492,7 @@ CONFIG_PCNET32=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -548,7 +564,7 @@ CONFIG_NET_WIRELESS=y
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CIRRUS=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
......@@ -601,11 +617,6 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
......@@ -632,6 +643,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
......@@ -698,10 +710,12 @@ CONFIG_I2C_CHARDEV=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
......@@ -713,6 +727,7 @@ CONFIG_I2C_CHARDEV=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_I2C_SENSOR is not set
......@@ -1047,6 +1062,7 @@ CONFIG_USB_SCANNER=m
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
......@@ -1123,7 +1139,6 @@ CONFIG_ZLIB_DEFLATE=y
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
CONFIG_BOOTX_TEXT=y
#
......
arch/ppc/kernel/misc.S
View file @ 64553593
......@@ -1380,3 +1380,4 @@ _GLOBAL(sys_call_table)
.long sys_utimes
.long sys_statfs64
.long sys_fstatfs64
.long ppc_fadvise64_64
arch/ppc/kernel/ppc-stub.c
View file @ 64553593
......@@ -106,6 +106,7 @@
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <asm/cacheflush.h>
#include <asm/system.h>
#include <asm/signal.h>
#include <asm/kgdb.h>
......@@ -186,7 +187,7 @@ hex(unsigned char ch)
* return 0.
*/
static unsigned char *
mem2hex(char *mem, char *buf, int count)
mem2hex(const char *mem, char *buf, int count)
{
unsigned char ch;
unsigned short tmp_s;
......@@ -828,11 +829,11 @@ breakpoint(void)
return;
}
asm(" .globl breakinst
breakinst: .long 0x7d821008
");
asm(" .globl breakinst \n\
breakinst: .long 0x7d821008");
}
#ifdef CONFIG_KGDB_CONSOLE
/* Output string in GDB O-packet format if GDB has connected. If nothing
output, returns 0 (caller must then handle output). */
int
......@@ -852,3 +853,4 @@ kgdb_output_string (const char* s, unsigned int count)
return 1;
}
#endif
arch/ppc/kernel/ppc_ksyms.c
View file @ 64553593
......@@ -200,6 +200,7 @@ EXPORT_SYMBOL(flush_dcache_range);
EXPORT_SYMBOL(flush_icache_user_range);
EXPORT_SYMBOL(flush_dcache_page);
EXPORT_SYMBOL(flush_tlb_kernel_range);
EXPORT_SYMBOL(flush_tlb_page);
#ifdef CONFIG_ALTIVEC
EXPORT_SYMBOL(last_task_used_altivec);
EXPORT_SYMBOL(giveup_altivec);
......
arch/ppc/kernel/smp.c
View file @ 64553593
......@@ -47,8 +47,8 @@ atomic_t ipi_sent;
DEFINE_PER_CPU(unsigned int, prof_multiplier);
DEFINE_PER_CPU(unsigned int, prof_counter);
unsigned long cache_decay_ticks = HZ/100;
unsigned long cpu_online_map = cpumask_of_cpu(0);
unsigned long cpu_possible_map = 1UL;
cpumask_t cpu_online_map;
cpumask_t cpu_possible_map;
int smp_hw_index[NR_CPUS];
struct thread_info *secondary_ti;
......@@ -336,7 +336,7 @@ static void __devinit smp_store_cpu_info(int id)
void __init smp_prepare_cpus(unsigned int max_cpus)
{
int num_cpus;
int num_cpus, i;
/* Fixup boot cpu */
smp_store_cpu_info(smp_processor_id());
......@@ -350,7 +350,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
/* Probe platform for CPUs: always linear. */
num_cpus = smp_ops->probe();
cpu_possible_map = (1 << num_cpus)-1;
for (i = 0; i < num_cpus; ++i)
cpu_set(i, cpu_possible_map);
/* Backup CPU 0 state */
__save_cpu_setup();
......
arch/ppc/kernel/syscalls.c
View file @ 64553593
......@@ -262,4 +262,14 @@ int sys_olduname(struct oldold_utsname __user * name)
return error;
}
/*
* We put the arguments in a different order so we only use 6
* registers for arguments, rather than 7 as sys_fadvise64_64 needs
* (because `offset' goes in r5/r6).
*/
long ppc_fadvise64_64(int fd, int advice, loff_t offset, loff_t len)
{
return sys_fadvise64_64(fd, offset, len, advice);
}
cond_syscall(sys_pciconfig_iobase);
arch/ppc/platforms/mcpn765_serial.h
View file @ 64553593
......@@ -30,7 +30,8 @@
#endif
/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
#define BASE_BAUD ( 1843200 / 16 )
#define BASE_BAUD ( 1843200 / 16 )
#define UART_CLK 1843200
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
......
arch/ppc/platforms/mcpn765_setup.c
View file @ 64553593
......@@ -31,6 +31,9 @@
#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h> /* for linux/serial_core.h */
#include <linux/serial_core.h>
#include <asm/system.h>
#include <asm/pgtable.h>
......@@ -49,36 +52,94 @@
#include <asm/pplus.h>
#include "mcpn765.h"
#include "mcpn765_serial.h"
static u_char mcpn765_openpic_initsenses[] __initdata = {
0, /* 16: i8259 cascade (active high) */
1, /* 17: COM1,2,3,4 */
1, /* 18: Enet 1 (front panel) */
1, /* 19: HAWK WDT XXXX */
1, /* 20: 21554 PCI-PCI bridge */
1, /* 21: cPCI INTA# */
1, /* 22: cPCI INTB# */
1, /* 23: cPCI INTC# */
1, /* 24: cPCI INTD# */
1, /* 25: PMC1 INTA#, PMC2 INTB# */
1, /* 26: PMC1 INTB#, PMC2 INTC# */
1, /* 27: PMC1 INTC#, PMC2 INTD# */
1, /* 28: PMC1 INTD#, PMC2 INTA# */
1, /* 29: Enet 2 (connected to J3) */
1, /* 30: Abort Switch */
1, /* 31: RTC Alarm */
(IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE),/* 16: i8259 cascade */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 17: COM1,2,3,4 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 18: Enet 1 (front) */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 19: HAWK WDT XXXX */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 20: 21554 bridge */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 21: cPCI INTA# */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 22: cPCI INTB# */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 23: cPCI INTC# */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 24: cPCI INTD# */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 25: PMC1 INTA#,PMC2 INTB#*/
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 26: PMC1 INTB#,PMC2 INTC#*/
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 27: PMC1 INTC#,PMC2 INTD#*/
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 28: PMC1 INTD#,PMC2 INTA#*/
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 29: Enet 2 (J3) */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 30: Abort Switch */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 31: RTC Alarm */
};
extern u_int openpic_irq(void);
extern char cmd_line[];
extern void gen550_progress(char *, unsigned short);
extern void gen550_init(int, struct uart_port *);
int use_of_interrupt_tree = 0;
static void mcpn765_halt(void);
TODC_ALLOC();
#if defined(CONFIG_SERIAL_8250) && \
(defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG))
static void __init
mcpn765_early_serial_map(void)
{
struct uart_port serial_req;
/* Setup serial port access */
memset(&serial_req, 0, sizeof(serial_req));
serial_req.uartclk = UART_CLK;
serial_req.irq = 17;
serial_req.flags = STD_COM_FLAGS;
serial_req.iotype = SERIAL_IO_MEM;
serial_req.membase = (u_char *)MCPN765_SERIAL_1;
serial_req.regshift = 4;
gen550_init(0, &serial_req);
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 0 failed\n");
/* Assume early_serial_setup() doesn't modify serial_req */
serial_req.line = 1;
serial_req.irq = 17;
serial_req.membase = (u_char *)MCPN765_SERIAL_2;
gen550_init(1, &serial_req);
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 1 failed\n");
/* Assume early_serial_setup() doesn't modify serial_req */
serial_req.line = 2;
serial_req.irq = 17;
serial_req.membase = (u_char *)MCPN765_SERIAL_3;
gen550_init(2, &serial_req);
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 2 failed\n");
/* Assume early_serial_setup() doesn't modify serial_req */
serial_req.line = 3;
serial_req.irq = 17;
serial_req.membase = (u_char *)MCPN765_SERIAL_4;
gen550_init(3, &serial_req);
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 3 failed\n");
}
#endif
static void __init
mcpn765_setup_arch(void)
{
......@@ -187,12 +248,12 @@ mcpn765_init_IRQ(void)
if ( ppc_md.progress )
ppc_md.progress("init_irq: enter", 0);
openpic_init(1, NUM_8259_INTERRUPTS, NULL, -1);
openpic_init(NUM_8259_INTERRUPTS);
for(i=0; i < NUM_8259_INTERRUPTS; i++)
irq_desc[i].handler = &i8259_pic;
i8259_init(NULL);
i8259_init(0);
if ( ppc_md.progress )
ppc_md.progress("init_irq: exit", 0);
......@@ -361,65 +422,15 @@ mcpn765_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
static __inline__ void
mcpn765_set_bat(void)
{
unsigned long bat3u, bat3l;
static int mapping_set = 0;
if (!mapping_set) {
__asm__ __volatile__(
" lis %0,0xf000\n \
ori %1,%0,0x002a\n \
ori %0,%0,0x1ffe\n \
mtspr 0x21e,%0\n \
mtspr 0x21f,%1\n \
isync\n \
sync "
: "=r" (bat3u), "=r" (bat3l));
mapping_set = 1;
}
return;
mb();
mtspr(DBAT1U, 0xfe8000fe);
mtspr(DBAT1L, 0xfe80002a);
mb();
}
#ifdef CONFIG_SERIAL_TEXT_DEBUG
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <asm/serial.h>
static struct serial_state rs_table[RS_TABLE_SIZE] = {
SERIAL_PORT_DFNS /* Defined in <asm/serial.h> */
};
static void
mcpn765_progress(char *s, unsigned short hex)
{
volatile char c;
volatile unsigned long com_port;
u16 shift;
com_port = rs_table[0].port;
shift = rs_table[0].iomem_reg_shift;
while ((c = *s++) != 0) {
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = c;
if (c == '\n') {
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = '\r';
}
}
}
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
unsigned long r6, unsigned long r7)
{
parse_bootinfo(find_bootinfo());
......@@ -458,11 +469,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.heartbeat_reset = 0;
ppc_md.heartbeat_count = 0;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = mcpn765_progress;
#else /* !CONFIG_SERIAL_TEXT_DEBUG */
ppc_md.progress = NULL;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
#if defined(CONFIG_SERIAL_8250) && \
(defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG))
mcpn765_early_serial_map();
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
#endif
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
ppc_ide_md.default_irq = mcpn765_ide_default_irq;
......
arch/ppc/platforms/sandpoint.c
View file @ 64553593
......@@ -356,6 +356,21 @@ sandpoint_setup_arch(void)
SANDPOINT_87308_CFG_OUTB(0x30, 0x01); \
}
/*
* Fix IDE interrupts.
*/
static int __init
sandpoint_fix_winbond_83553(void)
{
/* Make all 8259 interrupt level sensitive */
outb(0xf8, 0x4d0);
outb(0xde, 0x4d1);
return 0;
}
arch_initcall(sandpoint_fix_winbond_83553);
/*
* Initialize the ISA devices on the Nat'l PC87308VUL SuperIO chip.
*/
......@@ -391,21 +406,6 @@ sandpoint_setup_natl_87308(void)
arch_initcall(sandpoint_setup_natl_87308);
/*
* Fix IDE interrupts.
*/
static int __init
sandpoint_fix_winbond_83553(void)
{
/* Make all 8259 interrupt level sensitive */
outb(0xf8, 0x4d0);
outb(0xde, 0x4d1);
return 0;
}
arch_initcall(sandpoint_fix_winbond_83553);
static int __init
sandpoint_request_io(void)
{
......
arch/ppc/platforms/sandpoint.h
View file @ 64553593
......@@ -61,9 +61,9 @@
#define UART_CLK 1843200
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
#else
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF)
#endif
#define STD_SERIAL_PORT_DFNS \
......
drivers/ide/ide-cd.c
View file @ 64553593
......@@ -794,16 +794,16 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
request or data protect error.*/
ide_dump_status (drive, "command error", stat);
do_end_request = 1;
} else if ((err & ~ABRT_ERR) != 0) {
/* Go to the default handler
for other errors. */
DRIVER(drive)->error(drive, "cdrom_decode_status",stat);
return 1;
} else if (sense_key == MEDIUM_ERROR) {
/* No point in re-trying a zillion times on a bad
* sector... If we got here the error is not correctable */
ide_dump_status (drive, "media error (bad sector)", stat);
do_end_request = 1;
} else if ((err & ~ABRT_ERR) != 0) {
/* Go to the default handler
for other errors. */
DRIVER(drive)->error(drive, "cdrom_decode_status",stat);
return 1;
} else if ((++rq->errors > ERROR_MAX)) {
/* We've racked up too many retries. Abort. */
do_end_request = 1;
......
drivers/input/input.c
View file @ 64553593
......@@ -280,7 +280,7 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
if (id->id.product != dev->id.product)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
if (id->id.version != dev->id.version)
continue;
......
drivers/usb/storage/Kconfig
View file @ 64553593
......@@ -6,7 +6,8 @@ comment "SCSI support is needed for USB Storage"
config USB_STORAGE
tristate "USB Mass Storage support"
depends on USB && SCSI
depends on USB
select SCSI
---help---
Say Y here if you want to connect USB mass storage devices to your
computer's USB port. This is the driver you need for USB floppy drives,
......
fs/nfs/dir.c
View file @ 64553593
......@@ -557,7 +557,7 @@ static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd)
/* Force a full look up iff the parent directory has changed */
if (nfs_check_verifier(dir, dentry)) {
if (nfs_lookup_verify_inode(inode, isopen))
goto out_bad;
goto out_zap_parent;
goto out_valid;
}
......@@ -566,7 +566,7 @@ static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd)
if (memcmp(NFS_FH(inode), &fhandle, sizeof(struct nfs_fh))!= 0)
goto out_bad;
if (nfs_lookup_verify_inode(inode, isopen))
goto out_bad;
goto out_zap_parent;
goto out_valid_renew;
}
......@@ -587,6 +587,8 @@ static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd)
unlock_kernel();
dput(parent);
return 1;
out_zap_parent:
nfs_zap_caches(dir);
out_bad:
NFS_CACHEINV(dir);
if (inode && S_ISDIR(inode->i_mode)) {
......@@ -670,36 +672,29 @@ static struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, stru
error = -ENOMEM;
dentry->d_op = &nfs_dentry_operations;
lock_kernel();
/* If we're doing an exclusive create, optimize away the lookup */
if (nfs_is_exclusive_create(dir, nd))
return NULL;
goto no_entry;
lock_kernel();
error = nfs_cached_lookup(dir, dentry, &fhandle, &fattr);
if (!error) {
error = -EACCES;
inode = nfs_fhget(dentry, &fhandle, &fattr);
if (inode) {
d_add(dentry, inode);
nfs_renew_times(dentry);
error = 0;
}
goto out_unlock;
}
error = NFS_PROTO(dir)->lookup(dir, &dentry->d_name, &fhandle, &fattr);
if (error == -ENOENT)
goto no_entry;
if (!error) {
error = -EACCES;
inode = nfs_fhget(dentry, &fhandle, &fattr);
if (inode) {
no_entry:
d_add(dentry, inode);
error = 0;
}
nfs_renew_times(dentry);
if (error != 0) {
error = NFS_PROTO(dir)->lookup(dir, &dentry->d_name,
&fhandle, &fattr);
if (error == -ENOENT)
goto no_entry;
if (error != 0)
goto out_unlock;
}
error = -EACCES;
inode = nfs_fhget(dentry, &fhandle, &fattr);
if (!inode)
goto out_unlock;
no_entry:
error = 0;
d_add(dentry, inode);
nfs_renew_times(dentry);
out_unlock:
unlock_kernel();
out:
......
fs/nfs/nfsroot.c
View file @ 64553593
......@@ -437,6 +437,7 @@ static int __init root_nfs_ports(void)
*/
static int __init root_nfs_get_handle(void)
{
struct nfs_fh fh;
struct sockaddr_in sin;
int status;
int protocol = (nfs_data.flags & NFS_MOUNT_TCP) ?
......@@ -445,11 +446,14 @@ static int __init root_nfs_get_handle(void)
NFS_MNT3_VERSION : NFS_MNT_VERSION;
set_sockaddr(&sin, servaddr, mount_port);
status = nfsroot_mount(&sin, nfs_path, &nfs_data.root,
version, protocol);
status = nfsroot_mount(&sin, nfs_path, &fh, version, protocol);
if (status < 0)
printk(KERN_ERR "Root-NFS: Server returned error %d "
"while mounting %s\n", status, nfs_path);
else {
nfs_data.root.size = fh.size;
memcpy(nfs_data.root.data, fh.data, fh.size);
}
return status;
}
......
include/asm-ppc/cpm_8260.h
View file @ 64553593
......@@ -195,7 +195,7 @@ typedef struct smc_uart {
/* SMC uart mode register (Internal memory map).
*/
#define SMCMR_REN ((ushort)0x0001)
#define SMCMR_REN ((ushort)0x0001)
#define SMCMR_TEN ((ushort)0x0002)
#define SMCMR_DM ((ushort)0x000c)
#define SMCMR_SM_GCI ((ushort)0x0000)
......@@ -212,10 +212,12 @@ typedef struct smc_uart {
/* SMC Event and Mask register.
*/
#define SMCM_TXE ((unsigned char)0x10)
#define SMCM_BSY ((unsigned char)0x04)
#define SMCM_TX ((unsigned char)0x02)
#define SMCM_RX ((unsigned char)0x01)
#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
#define SMCM_TXE ((unsigned char)0x10)
#define SMCM_BSY ((unsigned char)0x04)
#define SMCM_TX ((unsigned char)0x02)
#define SMCM_RX ((unsigned char)0x01)
/* Baud rate generators.
*/
......@@ -314,10 +316,10 @@ typedef struct smc_uart {
/* SCC Event and Mask register.
*/
#define SCCM_TXE ((unsigned char)0x10)
#define SCCM_BSY ((unsigned char)0x04)
#define SCCM_TX ((unsigned char)0x02)
#define SCCM_RX ((unsigned char)0x01)
#define SCCM_TXE ((unsigned char)0x10)
#define SCCM_BSY ((unsigned char)0x04)
#define SCCM_TX ((unsigned char)0x02)
#define SCCM_RX ((unsigned char)0x01)
typedef struct scc_param {
ushort scc_rbase; /* Rx Buffer descriptor base address */
......
include/asm-ppc/processor.h
View file @ 64553593
......@@ -654,6 +654,7 @@ extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
*/
#define EISA_bus 0
#define MCA_bus 0
#define MCA_bus__is_a_macro
/* Lazy FPU handling on uni-processor */
extern struct task_struct *last_task_used_math;
......
include/asm-ppc/unistd.h
View file @ 64553593
......@@ -258,8 +258,9 @@
#define __NR_utimes 251
#define __NR_statfs64 252
#define __NR_fstatfs64 253
#define __NR_fadvise64_64 254
#define __NR_syscalls 254
#define __NR_syscalls 255
#define __NR(n) #n
......
include/linux/sunrpc/timer.h
View file @ 64553593
......@@ -15,7 +15,6 @@ struct rpc_rtt {
unsigned long timeo; /* default timeout value */
unsigned long srtt[5]; /* smoothed round trip time << 3 */
unsigned long sdrtt[5]; /* smoothed medium deviation of RTT */
atomic_t ntimeouts; /* Global count of the number of timeouts */
};
......@@ -23,19 +22,4 @@ extern void rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo);
extern void rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m);
extern unsigned long rpc_calc_rto(struct rpc_rtt *rt, unsigned timer);
static inline void rpc_inc_timeo(struct rpc_rtt *rt)
{
atomic_inc(&rt->ntimeouts);
}
static inline void rpc_clear_timeo(struct rpc_rtt *rt)
{
atomic_set(&rt->ntimeouts, 0);
}
static inline int rpc_ntimeo(struct rpc_rtt *rt)
{
return atomic_read(&rt->ntimeouts);
}
#endif /* _LINUX_SUNRPC_TIMER_H */
include/linux/sunrpc/xprt.h
View file @ 64553593
......@@ -98,6 +98,10 @@ struct rpc_rqst {
struct list_head rq_list;
struct xdr_buf rq_private_buf; /* The receive buffer
* used in the softirq.
*/
/*
* For authentication (e.g. auth_des)
*/
......@@ -111,7 +115,7 @@ struct rpc_rqst {
unsigned long rq_xtime; /* when transmitted */
int rq_ntimeo;
int rq_nresend;
int rq_ntrans;
};
#define rq_svec rq_snd_buf.head
#define rq_slen rq_snd_buf.len
......
net/sunrpc/clnt.c
View file @ 64553593
......@@ -659,7 +659,7 @@ call_transmit(struct rpc_task *task)
if (task->tk_status < 0)
return;
task->tk_status = xprt_prepare_transmit(task);
if (task->tk_status < 0)
if (task->tk_status != 0)
return;
/* Encode here so that rpcsec_gss can use correct sequence number. */
if (!task->tk_rqstp->rq_bytes_sent)
......@@ -685,7 +685,7 @@ call_status(struct rpc_task *task)
struct rpc_rqst *req = task->tk_rqstp;
int status;
if (req->rq_received != 0)
if (req->rq_received > 0 && !req->rq_bytes_sent)
task->tk_status = req->rq_received;
dprintk("RPC: %4d call_status (status %d)\n",
......@@ -744,14 +744,14 @@ call_timeout(struct rpc_task *task)
dprintk("RPC: %4d call_timeout (major)\n", task->tk_pid);
if (clnt->cl_softrtry) {
if (clnt->cl_chatty && !task->tk_exit)
if (clnt->cl_chatty)
printk(KERN_NOTICE "%s: server %s not responding, timed out\n",
clnt->cl_protname, clnt->cl_server);
rpc_exit(task, -EIO);
return;
}
if (clnt->cl_chatty && !(task->tk_flags & RPC_CALL_MAJORSEEN) && rpc_ntimeo(&clnt->cl_rtt) > 7) {
if (clnt->cl_chatty && !(task->tk_flags & RPC_CALL_MAJORSEEN)) {
task->tk_flags |= RPC_CALL_MAJORSEEN;
printk(KERN_NOTICE "%s: server %s not responding, still trying\n",
clnt->cl_protname, clnt->cl_server);
......@@ -787,19 +787,26 @@ call_decode(struct rpc_task *task)
if (task->tk_status < 12) {
if (!clnt->cl_softrtry) {
task->tk_action = call_transmit;
task->tk_action = call_bind;
clnt->cl_stats->rpcretrans++;
} else {
printk(KERN_WARNING "%s: too small RPC reply size (%d bytes)\n",
clnt->cl_protname, task->tk_status);
rpc_exit(task, -EIO);
goto out_retry;
}
printk(KERN_WARNING "%s: too small RPC reply size (%d bytes)\n",
clnt->cl_protname, task->tk_status);
rpc_exit(task, -EIO);
return;
}
/* Check that the softirq receive buffer is valid */
WARN_ON(memcmp(&req->rq_rcv_buf, &req->rq_private_buf,
sizeof(req->rq_rcv_buf)) != 0);
/* Verify the RPC header */
if (!(p = call_verify(task)))
return;
if (!(p = call_verify(task))) {
if (task->tk_action == NULL)
return;
goto out_retry;
}
/*
* The following is an NFS-specific hack to cater for setuid
......@@ -812,7 +819,7 @@ call_decode(struct rpc_task *task)
task->tk_flags ^= RPC_CALL_REALUID;
task->tk_action = call_bind;
task->tk_suid_retry--;
return;
goto out_retry;
}
}
......@@ -822,6 +829,10 @@ call_decode(struct rpc_task *task)
task->tk_status = decode(req, p, task->tk_msg.rpc_resp);
dprintk("RPC: %4d call_decode result %d\n", task->tk_pid,
task->tk_status);
return;
out_retry:
req->rq_received = 0;
task->tk_status = 0;
}
/*
......
net/sunrpc/timer.c
View file @ 64553593
......@@ -25,7 +25,7 @@
#define RPC_RTO_MAX (60*HZ)
#define RPC_RTO_INIT (HZ/5)
#define RPC_RTO_MIN (2)
#define RPC_RTO_MIN (HZ/10)
void
rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo)
......@@ -41,8 +41,6 @@ rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo)
rt->srtt[i] = init;
rt->sdrtt[i] = RPC_RTO_INIT;
}
atomic_set(&rt->ntimeouts, 0);
}
/*
......@@ -52,7 +50,7 @@ rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo)
void
rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m)
{
unsigned long *srtt, *sdrtt;
long *srtt, *sdrtt;
if (timer-- == 0)
return;
......@@ -64,14 +62,14 @@ rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m)
if (m == 0)
m = 1L;
srtt = &rt->srtt[timer];
srtt = (long *)&rt->srtt[timer];
m -= *srtt >> 3;
*srtt += m;
if (m < 0)
m = -m;
sdrtt = &rt->sdrtt[timer];
sdrtt = (long *)&rt->sdrtt[timer];
m -= *sdrtt >> 2;
*sdrtt += m;
......@@ -101,7 +99,7 @@ rpc_calc_rto(struct rpc_rtt *rt, unsigned timer)
if (timer-- == 0)
return rt->timeo;
res = (rt->srtt[timer] >> 3) + rt->sdrtt[timer];
res = ((rt->srtt[timer] + 7) >> 3) + rt->sdrtt[timer];
if (res > RPC_RTO_MAX)
res = RPC_RTO_MAX;
......
net/sunrpc/xprt.c
View file @ 64553593
......@@ -138,15 +138,22 @@ xprt_from_sock(struct sock *sk)
static int
__xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task)
{
struct rpc_rqst *req = task->tk_rqstp;
if (!xprt->snd_task) {
if (xprt->nocong || __xprt_get_cong(xprt, task))
if (xprt->nocong || __xprt_get_cong(xprt, task)) {
xprt->snd_task = task;
if (req) {
req->rq_bytes_sent = 0;
req->rq_ntrans++;
}
}
}
if (xprt->snd_task != task) {
dprintk("RPC: %4d TCP write queue full\n", task->tk_pid);
task->tk_timeout = 0;
task->tk_status = -EAGAIN;
if (task->tk_rqstp && task->tk_rqstp->rq_nresend)
if (req && req->rq_ntrans)
rpc_sleep_on(&xprt->resend, task, NULL, NULL);
else
rpc_sleep_on(&xprt->sending, task, NULL, NULL);
......@@ -181,8 +188,14 @@ __xprt_lock_write_next(struct rpc_xprt *xprt)
if (!task)
return;
}
if (xprt->nocong || __xprt_get_cong(xprt, task))
if (xprt->nocong || __xprt_get_cong(xprt, task)) {
struct rpc_rqst *req = task->tk_rqstp;
xprt->snd_task = task;
if (req) {
req->rq_bytes_sent = 0;
req->rq_ntrans++;
}
}
}
/*
......@@ -422,6 +435,9 @@ xprt_connect(struct rpc_task *task)
if (xprt_connected(xprt))
goto out_write;
if (task->tk_rqstp)
task->tk_rqstp->rq_bytes_sent = 0;
/*
* We're here because the xprt was marked disconnected.
* Start by resetting any existing state.
......@@ -566,14 +582,13 @@ xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied)
if (!xprt->nocong) {
xprt_adjust_cwnd(xprt, copied);
__xprt_put_cong(xprt, req);
if (!req->rq_nresend) {
if (req->rq_ntrans == 1) {
unsigned timer =
task->tk_msg.rpc_proc->p_timer;
if (timer)
rpc_update_rtt(&clnt->cl_rtt, timer,
(long)jiffies - req->rq_xtime);
}
rpc_clear_timeo(&clnt->cl_rtt);
}
#ifdef RPC_PROFILE
......@@ -714,11 +729,11 @@ udp_data_ready(struct sock *sk, int len)
dprintk("RPC: %4d received reply\n", task->tk_pid);
if ((copied = rovr->rq_rlen) > repsize)
if ((copied = rovr->rq_private_buf.len) > repsize)
copied = repsize;
/* Suck it into the iovec, verify checksum if not done by hw. */
if (csum_partial_copy_to_xdr(&rovr->rq_rcv_buf, skb))
if (csum_partial_copy_to_xdr(&rovr->rq_private_buf, skb))
goto out_unlock;
/* Something worked... */
......@@ -841,7 +856,7 @@ tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc)
return;
}
rcvbuf = &req->rq_rcv_buf;
rcvbuf = &req->rq_private_buf;
len = desc->count;
if (len > xprt->tcp_reclen - xprt->tcp_offset) {
skb_reader_t my_desc;
......@@ -859,7 +874,7 @@ tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc)
xprt->tcp_copied += len;
xprt->tcp_offset += len;
if (xprt->tcp_copied == req->rq_rlen)
if (xprt->tcp_copied == req->rq_private_buf.len)
xprt->tcp_flags &= ~XPRT_COPY_DATA;
else if (xprt->tcp_offset == xprt->tcp_reclen) {
if (xprt->tcp_flags & XPRT_LAST_FRAG)
......@@ -1039,21 +1054,6 @@ xprt_write_space(struct sock *sk)
read_unlock(&sk->sk_callback_lock);
}
/*
* Exponential backoff for UDP retries
*/
static inline int
xprt_expbackoff(struct rpc_task *task, struct rpc_rqst *req)
{
int backoff;
req->rq_ntimeo++;
backoff = min(rpc_ntimeo(&task->tk_client->cl_rtt), XPRT_MAX_BACKOFF);
if (req->rq_ntimeo < (1 << backoff))
return 1;
return 0;
}
/*
* RPC receive timeout handler.
*/
......@@ -1067,15 +1067,8 @@ xprt_timer(struct rpc_task *task)
if (req->rq_received)
goto out;
if (!xprt->nocong) {
if (xprt_expbackoff(task, req)) {
rpc_add_timer(task, xprt_timer);
goto out_unlock;
}
rpc_inc_timeo(&task->tk_client->cl_rtt);
xprt_adjust_cwnd(req->rq_xprt, -ETIMEDOUT);
}
req->rq_nresend++;
xprt_adjust_cwnd(req->rq_xprt, -ETIMEDOUT);
__xprt_put_cong(xprt, req);
dprintk("RPC: %4d xprt_timer (%s request)\n",
task->tk_pid, req ? "pending" : "backlogged");
......@@ -1084,7 +1077,6 @@ xprt_timer(struct rpc_task *task)
out:
task->tk_timeout = 0;
rpc_wake_up_task(task);
out_unlock:
spin_unlock(&xprt->sock_lock);
}
......@@ -1104,10 +1096,11 @@ xprt_prepare_transmit(struct rpc_task *task)
if (xprt->shutdown)
return -EIO;
if (task->tk_rpcwait)
rpc_remove_wait_queue(task);
spin_lock_bh(&xprt->sock_lock);
if (req->rq_received && !req->rq_bytes_sent) {
err = req->rq_received;
goto out_unlock;
}
if (!__xprt_lock_write(xprt, task)) {
err = -EAGAIN;
goto out_unlock;
......@@ -1117,11 +1110,6 @@ xprt_prepare_transmit(struct rpc_task *task)
err = -ENOTCONN;
goto out_unlock;
}
if (list_empty(&req->rq_list)) {
list_add_tail(&req->rq_list, &xprt->recv);
req->rq_received = 0;
}
out_unlock:
spin_unlock_bh(&xprt->sock_lock);
return err;
......@@ -1146,6 +1134,20 @@ xprt_transmit(struct rpc_task *task)
*marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker)));
}
smp_rmb();
if (!req->rq_received) {
if (list_empty(&req->rq_list)) {
spin_lock_bh(&xprt->sock_lock);
/* Update the softirq receive buffer */
memcpy(&req->rq_private_buf, &req->rq_rcv_buf,
sizeof(req->rq_private_buf));
/* Add request to the receive list */
list_add_tail(&req->rq_list, &xprt->recv);
spin_unlock_bh(&xprt->sock_lock);
}
} else if (!req->rq_bytes_sent)
return;
/* Continue transmitting the packet/record. We must be careful
* to cope with writespace callbacks arriving _after_ we have
* called xprt_sendmsg().
......@@ -1160,8 +1162,12 @@ xprt_transmit(struct rpc_task *task)
if (xprt->stream) {
req->rq_bytes_sent += status;
if (req->rq_bytes_sent >= req->rq_slen)
/* If we've sent the entire packet, immediately
* reset the count of bytes sent. */
if (req->rq_bytes_sent >= req->rq_slen) {
req->rq_bytes_sent = 0;
goto out_receive;
}
} else {
if (status >= req->rq_slen)
goto out_receive;
......@@ -1182,9 +1188,6 @@ xprt_transmit(struct rpc_task *task)
* hence there is no danger of the waking up task being put on
* schedq, and being picked up by a parallel run of rpciod().
*/
if (req->rq_received)
goto out_release;
task->tk_status = status;
switch (status) {
......@@ -1214,22 +1217,21 @@ xprt_transmit(struct rpc_task *task)
if (xprt->stream)
xprt_disconnect(xprt);
}
out_release:
xprt_release_write(xprt, task);
req->rq_bytes_sent = 0;
return;
out_receive:
dprintk("RPC: %4d xmit complete\n", task->tk_pid);
/* Set the task's receive timeout value */
spin_lock_bh(&xprt->sock_lock);
if (!xprt->nocong) {
task->tk_timeout = rpc_calc_rto(&clnt->cl_rtt,
task->tk_msg.rpc_proc->p_timer);
req->rq_ntimeo = 0;
task->tk_timeout <<= clnt->cl_timeout.to_retries
- req->rq_timeout.to_retries;
if (task->tk_timeout > req->rq_timeout.to_maxval)
task->tk_timeout = req->rq_timeout.to_maxval;
} else
task->tk_timeout = req->rq_timeout.to_current;
spin_lock_bh(&xprt->sock_lock);
/* Don't race with disconnect */
if (!xprt_connected(xprt))
task->tk_status = -ENOTCONN;
......@@ -1237,7 +1239,6 @@ xprt_transmit(struct rpc_task *task)
rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer);
__xprt_release_write(xprt, task);
spin_unlock_bh(&xprt->sock_lock);
req->rq_bytes_sent = 0;
}
/*
......
sound/pcmcia/vx/vx_entry.c
View file @ 64553593
......@@ -34,10 +34,8 @@ static void vxpocket_config(dev_link_t *link);
static int vxpocket_event(event_t event, int priority, event_callback_args_t *args);
static void vxpocket_release(u_long arg)
static void vxpocket_release(dev_link_t* link)
{
dev_link_t *link = (dev_link_t *)arg;
if (link->state & DEV_CONFIG) {
/* release cs resources */
CardServices(ReleaseConfiguration, link->handle);
......@@ -56,7 +54,7 @@ static int snd_vxpocket_free(vx_core_t *chip)
struct snd_vxp_entry *hw;
dev_link_t *link = &vxp->link;
vxpocket_release((u_long)link);
vxpocket_release(link);
/* Break the link with Card Services */
if (link->handle)
......@@ -148,9 +146,6 @@ dev_link_t *snd_vxpocket_attach(struct snd_vxp_entry *hw)
link->irq.Handler = &snd_vx_irq_handler;
link->irq.Instance = chip;
link->release.function = &vxpocket_release;
link->release.data = (u_long)link;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
......@@ -229,8 +224,6 @@ void snd_vxpocket_detach(struct snd_vxp_entry *hw, dev_link_t *link)
{
vx_core_t *chip = snd_magic_cast(vx_core_t, link->priv, return);
del_timer(&link->release);
snd_printdd(KERN_DEBUG "vxpocket_detach called\n");
/* Remove the interface data from the linked list */
if (hw) {
......@@ -326,7 +319,6 @@ static int vxpocket_event(event_t event, int priority, event_callback_args_t *ar
snd_printdd(KERN_DEBUG "CARD_REMOVAL..\n");
link->state &= ~DEV_PRESENT;
if (link->state & DEV_CONFIG) {
mod_timer(&link->release, jiffies + HZ/20);
chip->chip_status |= VX_STAT_IS_STALE;
}
break;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7