Commit 649eb382 authored by John Stultz's avatar John Stultz Committed by Robert Foss

drm/bridge: lt9611: Use both bits for HDMI sensing

In commit 19cf41b6 ("lontium-lt9611: check a different
register bit for HDMI sensing"), the bit flag used to detect
HDMI cable connect was switched from BIT(2) to BIT(0) to improve
compatibility with some monitors that didn't seem to set BIT(2).

However, with that change, I've seen occasional issues where the
detection failed, because BIT(2) was set, but not BIT(0).

Unfortunately, as I understand it, the bits and their function
was never clearly documented. So lets instead check both
(BIT(2) | BIT(0)) when checking the register.

Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: kernel-team@android.com
Fixes: 19cf41b6 ("lontium-lt9611: check a different register bit for HDMI sensing")
Signed-off-by: default avatarJohn Stultz <jstultz@google.com>
Reviewed-by: default avatarRobert Foss <robert.foss@linaro.org>
Signed-off-by: default avatarRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-2-jstultz@google.com
parent 1ff72d43
......@@ -584,7 +584,7 @@ static enum drm_connector_status __lt9611_detect(struct lt9611 *lt9611)
int connected = 0;
regmap_read(lt9611->regmap, 0x825e, &reg_val);
connected = (reg_val & BIT(0));
connected = (reg_val & (BIT(2) | BIT(0)));
lt9611->status = connected ? connector_status_connected :
connector_status_disconnected;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment