drm/amd/display: move remaining FPU code to dml folder

In the process of enabling DCN support for arm64, I found that the
dcn10_resource_construct_fp function in dcn10/dcn10_resource.c still
needs to use FPU. This will cause compilation to fail on ARM64 platforms
because -mgeneral-regs-only is enabled by default to disable the
hardware FPU. So move dcn10_resource_construct_fp from dcn10 folder to
dml/dcn10 folder to enable hardware FPU for that function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ao Zhong <hacc1225@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c

@@ -1295,47 +1295,6 @@ static uint32_t read_pipe_fuses(struct dc_context *ctx)
 	return value;
 }
 
-/*
- * Some architectures don't support soft-float (e.g. aarch64), on those
- * this function has to be called with hardfloat enabled, make sure not
- * to inline it so whatever fp stuff is done stays inside
- */
-static noinline void dcn10_resource_construct_fp(
-	struct dc *dc)
-{
-	if (dc->ctx->dce_version == DCN_VERSION_1_01) {
-		struct dcn_soc_bounding_box *dcn_soc = dc->dcn_soc;
-		struct dcn_ip_params *dcn_ip = dc->dcn_ip;
-		struct display_mode_lib *dml = &dc->dml;
-
-		dml->ip.max_num_dpp = 3;
-		/* TODO how to handle 23.84? */
-		dcn_soc->dram_clock_change_latency = 23;
-		dcn_ip->max_num_dpp = 3;
-	}
-	if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
-		dc->dcn_soc->urgent_latency = 3;
-		dc->debug.disable_dmcu = true;
-		dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 41.60f;
-	}
-
-
-	dc->dcn_soc->number_of_channels = dc->ctx->asic_id.vram_width / ddr4_dram_width;
-	ASSERT(dc->dcn_soc->number_of_channels < 3);
-	if (dc->dcn_soc->number_of_channels == 0)/*old sbios bug*/
-		dc->dcn_soc->number_of_channels = 2;
-
-	if (dc->dcn_soc->number_of_channels == 1) {
-		dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 19.2f;
-		dc->dcn_soc->fabric_and_dram_bandwidth_vnom0p8 = 17.066f;
-		dc->dcn_soc->fabric_and_dram_bandwidth_vmid0p72 = 14.933f;
-		dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 = 12.8f;
-		if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
-			dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 20.80f;
-		}
-	}
-}
-
 static bool verify_clock_values(struct dm_pp_clock_levels_with_voltage *clks)
 {
 	int i;
@@ -1510,8 +1469,9 @@ static bool dcn10_resource_construct(
 	memcpy(dc->dcn_ip, &dcn10_ip_defaults, sizeof(dcn10_ip_defaults));
 	memcpy(dc->dcn_soc, &dcn10_soc_defaults, sizeof(dcn10_soc_defaults));
 
-	/* Other architectures we build for build this with soft-float */
+	DC_FP_START();
 	dcn10_resource_construct_fp(dc);
+	DC_FP_END();
 
 	if (!dc->config.is_vmin_only_asic)
 		if (ASICREV_IS_RAVEN2(dc->ctx->asic_id.hw_internal_rev))

drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.c

@@ -27,6 +27,8 @@
 #include "dcn10/dcn10_resource.h"
 
 #include "dcn10_fpu.h"
+#include "resource.h"
+#include "amdgpu_dm/dc_fpu.h"
 
 /**
  * DOC: DCN10 FPU manipulation Overview
@@ -121,3 +123,37 @@ struct _vcs_dpi_soc_bounding_box_st dcn1_0_soc = {
 	.writeback_dram_clock_change_latency_us = 23.0,
 	.return_bus_width_bytes = 64,
 };
+
+void dcn10_resource_construct_fp(struct dc *dc)
+{
+	dc_assert_fp_enabled();
+	if (dc->ctx->dce_version == DCN_VERSION_1_01) {
+		struct dcn_soc_bounding_box *dcn_soc = dc->dcn_soc;
+		struct dcn_ip_params *dcn_ip = dc->dcn_ip;
+		struct display_mode_lib *dml = &dc->dml;
+
+		dml->ip.max_num_dpp = 3;
+		/* TODO how to handle 23.84? */
+		dcn_soc->dram_clock_change_latency = 23;
+		dcn_ip->max_num_dpp = 3;
+	}
+	if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev)) {
+		dc->dcn_soc->urgent_latency = 3;
+		dc->debug.disable_dmcu = true;
+		dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 41.60f;
+	}
+
+	dc->dcn_soc->number_of_channels = dc->ctx->asic_id.vram_width / ddr4_dram_width;
+	ASSERT(dc->dcn_soc->number_of_channels < 3);
+	if (dc->dcn_soc->number_of_channels == 0)/*old sbios bug*/
+		dc->dcn_soc->number_of_channels = 2;
+
+	if (dc->dcn_soc->number_of_channels == 1) {
+		dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 19.2f;
+		dc->dcn_soc->fabric_and_dram_bandwidth_vnom0p8 = 17.066f;
+		dc->dcn_soc->fabric_and_dram_bandwidth_vmid0p72 = 14.933f;
+		dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 = 12.8f;
+		if (ASICREV_IS_RV1_F0(dc->ctx->asic_id.hw_internal_rev))
+			dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 = 20.80f;
+	}
+}

drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.h

@@ -27,4 +27,6 @@
 #ifndef __DCN10_FPU_H__
 #define __DCN10_FPU_H__
 
+void dcn10_resource_construct_fp(struct dc *dc);
+
 #endif /* __DCN20_FPU_H__ */