ice: PTP: Rename macros used for PHY/QUAD port definitions

The ice_fill_phy_msg_e822 function uses several macros to specify the
correct address when sending a sideband message to the PHY block in
hardware.

The names of these macros are fairly generic and confusing. Future
development is going to extend the driver to support new hardware families
which have different relationships between PHY and QUAD. Rename the macros
for clarity and to indicate that they are E822 specific. This also matches
closer to the hardware specification in the data sheet.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/ice/ice_ptp_hw.c

@@ -294,9 +294,9 @@ ice_fill_phy_msg_e822(struct ice_sbq_msg_input *msg, u8 port, u16 offset)
 {
 	int phy_port, phy, quadtype;
 
-	phy_port = port % ICE_PORTS_PER_PHY;
-	phy = port / ICE_PORTS_PER_PHY;
-	quadtype = (port / ICE_PORTS_PER_QUAD) % ICE_NUM_QUAD_TYPE;
+	phy_port = port % ICE_PORTS_PER_PHY_E822;
+	phy = port / ICE_PORTS_PER_PHY_E822;
+	quadtype = (port / ICE_PORTS_PER_QUAD) % ICE_QUADS_PER_PHY_E822;
 
 	if (quadtype == 0) {
 		msg->msg_addr_low = P_Q0_L(P_0_BASE + offset, phy_port);
@@ -628,7 +628,7 @@ ice_fill_quad_msg_e822(struct ice_sbq_msg_input *msg, u8 quad, u16 offset)
 
 	msg->dest_dev = rmn_0;
 
-	if ((quad % ICE_NUM_QUAD_TYPE) == 0)
+	if ((quad % ICE_QUADS_PER_PHY_E822) == 0)
 		addr = Q_0_BASE + offset;
 	else
 		addr = Q_1_BASE + offset;

drivers/net/ethernet/intel/ice/ice_type.h

@@ -909,13 +909,13 @@ struct ice_hw {
 	/* INTRL granularity in 1 us */
 	u8 intrl_gran;
 
-#define ICE_PHY_PER_NAC		1
-#define ICE_MAX_QUAD		2
-#define ICE_NUM_QUAD_TYPE	2
-#define ICE_PORTS_PER_QUAD	4
-#define ICE_PHY_0_LAST_QUAD	1
-#define ICE_PORTS_PER_PHY	8
-#define ICE_NUM_EXTERNAL_PORTS		ICE_PORTS_PER_PHY
+#define ICE_PHY_PER_NAC_E822		1
+#define ICE_MAX_QUAD			2
+#define ICE_QUADS_PER_PHY_E822		2
+#define ICE_PORTS_PER_PHY_E822		8
+#define ICE_PORTS_PER_QUAD		4
+#define ICE_PORTS_PER_PHY_E810		4
+#define ICE_NUM_EXTERNAL_PORTS		(ICE_MAX_QUAD * ICE_PORTS_PER_QUAD)
 
 	/* Active package version (currently active) */
 	struct ice_pkg_ver active_pkg_ver;