Commit 65389322 authored by Moni Shoua's avatar Moni Shoua Committed by Jason Gunthorpe

IB/mlx: Set slid to zero in Ethernet completion struct

IB spec says that a lid should be ignored when link layer is Ethernet,
for example when building or parsing a CM request message (CA17-34).
However, since ib_lid_be16() and ib_lid_cpu16()  validates the slid,
not only when link layer is IB, we set the slid to zero to prevent
false warnings in the kernel log.

Fixes: 62ede777 ("Add OPA extended LID support")
Reviewed-by: default avatarMajd Dibbiny <majd@mellanox.com>
Signed-off-by: default avatarMoni Shoua <monis@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarJason Gunthorpe <jgg@mellanox.com>
parent aba46213
......@@ -601,6 +601,7 @@ static void use_tunnel_data(struct mlx4_ib_qp *qp, struct mlx4_ib_cq *cq, struct
wc->dlid_path_bits = 0;
if (is_eth) {
wc->slid = 0;
wc->vlan_id = be16_to_cpu(hdr->tun.sl_vid);
memcpy(&(wc->smac[0]), (char *)&hdr->tun.mac_31_0, 4);
memcpy(&(wc->smac[4]), (char *)&hdr->tun.slid_mac_47_32, 2);
......@@ -851,7 +852,6 @@ static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq,
}
}
wc->slid = be16_to_cpu(cqe->rlid);
g_mlpath_rqpn = be32_to_cpu(cqe->g_mlpath_rqpn);
wc->src_qp = g_mlpath_rqpn & 0xffffff;
wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f;
......@@ -860,6 +860,7 @@ static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq,
wc->wc_flags |= mlx4_ib_ipoib_csum_ok(cqe->status,
cqe->checksum) ? IB_WC_IP_CSUM_OK : 0;
if (is_eth) {
wc->slid = 0;
wc->sl = be16_to_cpu(cqe->sl_vid) >> 13;
if (be32_to_cpu(cqe->vlan_my_qpn) &
MLX4_CQE_CVLAN_PRESENT_MASK) {
......@@ -871,6 +872,7 @@ static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq,
memcpy(wc->smac, cqe->smac, ETH_ALEN);
wc->wc_flags |= (IB_WC_WITH_VLAN | IB_WC_WITH_SMAC);
} else {
wc->slid = be16_to_cpu(cqe->rlid);
wc->sl = be16_to_cpu(cqe->sl_vid) >> 12;
wc->vlan_id = 0xffff;
}
......
......@@ -226,7 +226,6 @@ static void handle_responder(struct ib_wc *wc, struct mlx5_cqe64 *cqe,
wc->ex.invalidate_rkey = be32_to_cpu(cqe->imm_inval_pkey);
break;
}
wc->slid = be16_to_cpu(cqe->slid);
wc->src_qp = be32_to_cpu(cqe->flags_rqpn) & 0xffffff;
wc->dlid_path_bits = cqe->ml_path;
g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
......@@ -241,10 +240,12 @@ static void handle_responder(struct ib_wc *wc, struct mlx5_cqe64 *cqe,
}
if (ll != IB_LINK_LAYER_ETHERNET) {
wc->slid = be16_to_cpu(cqe->slid);
wc->sl = (be32_to_cpu(cqe->flags_rqpn) >> 24) & 0xf;
return;
}
wc->slid = 0;
vlan_present = cqe->l4_l3_hdr_type & 0x1;
roce_packet_type = (be32_to_cpu(cqe->flags_rqpn) >> 24) & 0x3;
if (vlan_present) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment