Commit 65727977 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Tony Lindgren

ARM: OMAP1: DMA: Correct the number of logical channels

OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels.
OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels
available.

The wired 17 for the lch_count must have been used to cover the 16 + 1
dedicated LCD channel, in reality we can only use 9 or 16 channels.

The d->chan_count is not used by the omap-dma stack, so we can skip the
setup. chan_count was configured to the number of logical channels and not
the actual number of physical channels anyways.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 6ca36a45
......@@ -32,7 +32,6 @@
#include "soc.h"
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
static u32 enable_1510_mode;
......@@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void)
goto exit_iounmap;
}
d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
/* Valid attributes for omap1 plus processors */
if (cpu_is_omap15xx())
d->dev_caps = ENABLE_1510_MODE;
......@@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void)
d->dev_caps |= CLEAR_CSR_ON_READ;
d->dev_caps |= IS_WORD_16;
if (cpu_is_omap15xx())
d->chan_count = 9;
else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
if (!(d->dev_caps & ENABLE_1510_MODE))
d->chan_count = 16;
/* available logical channels */
if (cpu_is_omap15xx()) {
d->lch_count = 9;
} else {
if (d->dev_caps & ENABLE_1510_MODE)
d->lch_count = 9;
else
d->chan_count = 9;
d->lch_count = 16;
}
p = dma_plat_info;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment