Skip to content

L
linux
Commit 657ebfad authored by Paul Walmsley's avatar Paul Walmsley
Browse files
Options

OMAP3/4 clock: split into per-chip family files 

clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c.  Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate.  So now "clock3xxx.*" refers to the OMAP3
superset.

The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family.  To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.

OMAP4 is also affected by this.  It duplicated the OMAP3 non-CORE DPLL
clkops structure.  The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it.  (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
parent b92c170d
Hide whitespace changes
Inline Side-by-side
Showing with 450 additions and 332 deletions
arch/arm/mach-omap2/Makefile
View file @ 657ebfad
......@@ -7,22 +7,14 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o \
omap_hwmod_common_data.o
omap-3-4-common = dpll3xxx.o
prcm-common = prcm.o powerdomain.o
clock-common = clock.o clock_common_data.o \
clockdomain.o clkt_dpll.o \
clkt_clksel.o
clock-omap2xxx = clkt2xxx_dpllcore.o \
clkt2xxx_virt_prcm_set.o \
clkt2xxx_apll.o clkt2xxx_osc.o \
clkt2xxx_sys.o
clock-omap3xxx = clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
$(clock-omap2xxx)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
$(omap-3-4-common) $(clock-omap3xxx)
obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common)
obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
......@@ -64,14 +56,24 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
clock2xxx_data.o clkt2xxx_sys.o \
clkt2xxx_dpllcore.o \
clkt2xxx_virt_prcm_set.o \
clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
clock34xx.o clkt34xx_dpll3m2.o \
clock3517.o clock36xx.o \
dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
dpll3xxx.o
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o
obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o
obj-$(CONFIG_ARCH_OMAP4) += clock44xx.o clock44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
......@@ -127,7 +129,7 @@ obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
# Platform specific device init code
obj-y += usb-musb.o
......
arch/arm/mach-omap2/clkt34xx_dpll3m2.c
View file @ 657ebfad
......@@ -26,6 +26,7 @@
#include <plat/sdrc.h>
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
......
arch/arm/mach-omap2/clock.c
View file @ 657ebfad
......@@ -336,6 +336,18 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
return omap2_clksel_set_parent(clk, new_parent);
}
/* OMAP3/4 non-CORE DPLL clkops */
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
const struct clkops clkops_omap3_noncore_dpll_ops = {
.enable = omap3_noncore_dpll_enable,
.disable = omap3_noncore_dpll_disable,
};
#endif
/*-------------------------------------------------------------------------
* Omap2 clock reset and init functions
*-------------------------------------------------------------------------*/
......
arch/arm/mach-omap2/clock.h
View file @ 657ebfad
......@@ -141,4 +141,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
#define omap2_clk_exit_cpufreq_table 0
#endif
extern const struct clkops clkops_omap3_noncore_dpll_ops;
#endif
arch/arm/mach-omap2/clock34xx.c
View file @ 657ebfad
......@@ -8,7 +8,8 @@
* Jouni Högander
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
* Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -17,42 +18,16 @@
#undef DEBUG
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"
#include "clock34xx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
/*
* DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
* that are sourced by DPLL5, and both of these require this clock
* to be at 120 MHz for proper operation.
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
/*
* In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
* in the same register at a bit offset of 0x8. The EN_ACK for ICK is
* at an offset of 4 from ICK enable bit.
*/
#define AM35XX_IPSS_ICK_MASK 0xF
#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
#define AM35XX_IPSS_CLK_IDLEST_VAL 0
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
......@@ -149,234 +124,3 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = {
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
* omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
* from HSDivider PWRDN problem Implements Errata ID: i556.
* @clk: DPLL output struct clk
*
* 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
* dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
* valueafter their respective PWRDN bits are set. Any dummy write
* (Any other value different from the Read value) to the
* corresponding CM_CLKSEL register will refresh the dividers.
*/
static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
{
u32 dummy_v, orig_v, clksel_shift;
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(clk);
/* Restore the dividers */
if (!ret) {
clksel_shift = __ffs(clk->parent->clksel_mask);
orig_v = __raw_readl(clk->parent->clksel_reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
dummy_v ^= (1 << clksel_shift);
__raw_writel(dummy_v, clk->parent->clksel_reg);
/* Write the original divider */
__raw_writel(orig_v, clk->parent->clksel_reg);
}
return ret;
}
const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
.enable = omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
.disable = omap2_dflt_clk_disable,
.find_companion = omap2_clk_dflt_find_companion,
.find_idlest = omap2_clk_dflt_find_idlest,
};
const struct clkops omap3_clkops_noncore_dpll_ops = {
.enable = omap3_noncore_dpll_enable,
.disable = omap3_noncore_dpll_disable,
};
/**
* am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The interface clocks on AM35xx IPSS reflects the clock idle status
* in the enable register itsel at a bit offset of 4 from the enable
* bit. A value of 1 indicates that clock is enabled.
*/
static void am35xx_clk_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
*idlest_reg = (__force void __iomem *)(clk->enable_reg);
*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
}
/**
* am35xx_clk_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
* @other_bit: u8 ** to return the companion clock bit shift in
*
* Some clocks don't have companion clocks. For example, modules with
* only an interface clock (such as HECC) don't have a companion
* clock. Right now, this code relies on the hardware exporting a bit
* in the correct companion register that indicates that the
* nonexistent 'companion clock' is active. Future patches will
* associate this type of code with per-module data structures to
* avoid this issue, and remove the casts. No return value.
*/
static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
u8 *other_bit)
{
*other_reg = (__force void __iomem *)(clk->enable_reg);
if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
else
*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
}
const struct clkops clkops_am35xx_ipss_module_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = am35xx_clk_find_idlest,
.find_companion = am35xx_clk_find_companion,
};
/**
* am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The IPSS target CM_IDLEST bit is at a different shift from the
* CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
* and @idlest_bit. No return value.
*/
static void am35xx_clk_ipss_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = AM35XX_ST_IPSS_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_am35xx_ipss_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = am35xx_clk_ipss_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
{
/*
* According to the 12-5 CDP code from TI, "Limitation 2.5"
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
if (omap_rev() == OMAP3430_REV_ES1_0) {
printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
"silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
return omap3_noncore_dpll_set_rate(clk, rate);
}
void __init omap3_clk_lock_dpll5(void)
{
struct clk *dpll5_clk;
struct clk *dpll5_m2_clk;
dpll5_clk = clk_get(NULL, "dpll5_ck");
clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
clk_enable(dpll5_clk);
/* Enable autoidle to allow it to enter low power bypass */
omap3_dpll_allow_idle(dpll5_clk);
/* Program dpll5_m2_clk divider for no division */
dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
clk_enable(dpll5_m2_clk);
clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
clk_disable(dpll5_m2_clk);
clk_disable(dpll5_clk);
return;
}
/* Common clock code */
/* REVISIT: Move this init stuff out into clock.c */
/*
* Switch the MPU rate if specified on cmdline.
* We cannot do this early until cmdline is parsed.
*/
static int __init omap3xxx_clk_arch_init(void)
{
struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
unsigned long osc_sys_rate;
bool err = 0;
if (!cpu_is_omap34xx())
return 0;
if (!mpurate)
return -EINVAL;
/* XXX test these for success */
dpll1_ck = clk_get(NULL, "dpll1_ck");
if (WARN(IS_ERR(dpll1_ck), "Failed to get dpll1_ck.\n"))
err = 1;
arm_fck = clk_get(NULL, "arm_fck");
if (WARN(IS_ERR(arm_fck), "Failed to get arm_fck.\n"))
err = 1;
core_ck = clk_get(NULL, "core_ck");
if (WARN(IS_ERR(core_ck), "Failed to get core_ck.\n"))
err = 1;
osc_sys_ck = clk_get(NULL, "osc_sys_ck");
if (WARN(IS_ERR(osc_sys_ck), "Failed to get osc_sys_ck.\n"))
err = 1;
if (err)
return -ENOENT;
/* REVISIT: not yet ready for 343x */
if (clk_set_rate(dpll1_ck, mpurate))
printk(KERN_ERR "*** Unable to set MPU rate\n");
recalculate_root_clocks();
osc_sys_rate = clk_get_rate(osc_sys_ck);
pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(osc_sys_rate / 1000000),
((osc_sys_rate / 100000) % 10),
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(arm_fck) / 1000000));
calibrate_delay();
return 0;
}
arch_initcall(omap3xxx_clk_arch_init);
arch/arm/mach-omap2/clock34xx.h
View file @ 657ebfad
/*
* OMAP3 clock function prototypes and macros
* OMAP34xx clock function prototypes and macros
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
* Copyright (C) 2007-2010 Texas Instruments, Inc.
* Copyright (C) 2007-2010 Nokia Corporation
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
int omap3xxx_clk_init(void);
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
void omap3_clk_lock_dpll5(void);
extern struct clk *sdrc_ick_p;
extern struct clk *arm_fck_p;
/* OMAP34xx-specific clkops */
extern const struct clkops clkops_omap3430es2_ssi_wait;
extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
extern const struct clkops omap3_clkops_noncore_dpll_ops;
/* AM35xx-specific clkops */
extern const struct clkops clkops_am35xx_ipss_module_wait;
extern const struct clkops clkops_am35xx_ipss_wait;
/* OMAP36xx-specific clkops */
extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
#endif
arch/arm/mach-omap2/clock3517.c 0 → 100644
View file @ 657ebfad
/*
* OMAP3517/3505-specific clock framework functions
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* Ranjith Lohithakshan
* Paul Walmsley
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
* Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include "clock.h"
#include "clock3517.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
/*
* In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
* in the same register at a bit offset of 0x8. The EN_ACK for ICK is
* at an offset of 4 from ICK enable bit.
*/
#define AM35XX_IPSS_ICK_MASK 0xF
#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
#define AM35XX_IPSS_CLK_IDLEST_VAL 0
/**
* am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The interface clocks on AM35xx IPSS reflects the clock idle status
* in the enable register itsel at a bit offset of 4 from the enable
* bit. A value of 1 indicates that clock is enabled.
*/
static void am35xx_clk_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
*idlest_reg = (__force void __iomem *)(clk->enable_reg);
*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
}
/**
* am35xx_clk_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
* @other_bit: u8 ** to return the companion clock bit shift in
*
* Some clocks don't have companion clocks. For example, modules with
* only an interface clock (such as HECC) don't have a companion
* clock. Right now, this code relies on the hardware exporting a bit
* in the correct companion register that indicates that the
* nonexistent 'companion clock' is active. Future patches will
* associate this type of code with per-module data structures to
* avoid this issue, and remove the casts. No return value.
*/
static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
u8 *other_bit)
{
*other_reg = (__force void __iomem *)(clk->enable_reg);
if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
else
*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
}
const struct clkops clkops_am35xx_ipss_module_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = am35xx_clk_find_idlest,
.find_companion = am35xx_clk_find_companion,
};
/**
* am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The IPSS target CM_IDLEST bit is at a different shift from the
* CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
* and @idlest_bit. No return value.
*/
static void am35xx_clk_ipss_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = AM35XX_ST_IPSS_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_am35xx_ipss_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = am35xx_clk_ipss_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
arch/arm/mach-omap2/clock3517.h 0 → 100644
View file @ 657ebfad
/*
* OMAP3517/3505 clock function prototypes and macros
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
extern const struct clkops clkops_am35xx_ipss_module_wait;
extern const struct clkops clkops_am35xx_ipss_wait;
#endif
arch/arm/mach-omap2/clock36xx.c 0 → 100644
View file @ 657ebfad
/*
* OMAP36xx-specific clkops
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* Mike Turquette
* Vijaykumar GN
* Paul Walmsley
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
* Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include "clock.h"
#include "clock36xx.h"
/**
* omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
* from HSDivider PWRDN problem Implements Errata ID: i556.
* @clk: DPLL output struct clk
*
* 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
* dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
* valueafter their respective PWRDN bits are set. Any dummy write
* (Any other value different from the Read value) to the
* corresponding CM_CLKSEL register will refresh the dividers.
*/
static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
{
u32 dummy_v, orig_v, clksel_shift;
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(clk);
/* Restore the dividers */
if (!ret) {
clksel_shift = __ffs(clk->parent->clksel_mask);
orig_v = __raw_readl(clk->parent->clksel_reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
dummy_v ^= (1 << clksel_shift);
__raw_writel(dummy_v, clk->parent->clksel_reg);
/* Write the original divider */
__raw_writel(orig_v, clk->parent->clksel_reg);
}
return ret;
}
const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
.enable = omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
.disable = omap2_dflt_clk_disable,
.find_companion = omap2_clk_dflt_find_companion,
.find_idlest = omap2_clk_dflt_find_idlest,
};
arch/arm/mach-omap2/clock36xx.h 0 → 100644
View file @ 657ebfad
/*
* OMAP36xx clock function prototypes and macros
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
#endif
arch/arm/mach-omap2/clock3xxx.c 0 → 100644
View file @ 657ebfad
/*
* OMAP3-specific clock framework functions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
* Copyright (C) 2007-2010 Nokia Corporation
*
* Paul Walmsley
* Jouni Högander
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"
#include "clock3xxx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
/*
* DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
* that are sourced by DPLL5, and both of these require this clock
* to be at 120 MHz for proper operation.
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
{
/*
* According to the 12-5 CDP code from TI, "Limitation 2.5"
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
if (omap_rev() == OMAP3430_REV_ES1_0) {
pr_err("clock: DPLL4 cannot change rate due to "
"silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
return omap3_noncore_dpll_set_rate(clk, rate);
}
void __init omap3_clk_lock_dpll5(void)
{
struct clk *dpll5_clk;
struct clk *dpll5_m2_clk;
dpll5_clk = clk_get(NULL, "dpll5_ck");
clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
clk_enable(dpll5_clk);
/* Enable autoidle to allow it to enter low power bypass */
omap3_dpll_allow_idle(dpll5_clk);
/* Program dpll5_m2_clk divider for no division */
dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
clk_enable(dpll5_m2_clk);
clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
clk_disable(dpll5_m2_clk);
clk_disable(dpll5_clk);
return;
}
/* Common clock code */
/* REVISIT: Move this init stuff out into clock.c */
/*
* Switch the MPU rate if specified on cmdline.
* We cannot do this early until cmdline is parsed.
*/
static int __init omap3xxx_clk_arch_init(void)
{
struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
unsigned long osc_sys_rate;
bool err = 0;
if (!cpu_is_omap34xx())
return 0;
if (!mpurate)
return -EINVAL;
/* XXX test these for success */
dpll1_ck = clk_get(NULL, "dpll1_ck");
if (WARN(IS_ERR(dpll1_ck), "Failed to get dpll1_ck.\n"))
err = 1;
arm_fck = clk_get(NULL, "arm_fck");
if (WARN(IS_ERR(arm_fck), "Failed to get arm_fck.\n"))
err = 1;
core_ck = clk_get(NULL, "core_ck");
if (WARN(IS_ERR(core_ck), "Failed to get core_ck.\n"))
err = 1;
osc_sys_ck = clk_get(NULL, "osc_sys_ck");
if (WARN(IS_ERR(osc_sys_ck), "Failed to get osc_sys_ck.\n"))
err = 1;
if (err)
return -ENOENT;
/* REVISIT: not yet ready for 343x */
if (clk_set_rate(dpll1_ck, mpurate))
printk(KERN_ERR "*** Unable to set MPU rate\n");
recalculate_root_clocks();
osc_sys_rate = clk_get_rate(osc_sys_ck);
pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(osc_sys_rate / 1000000),
((osc_sys_rate / 100000) % 10),
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(arm_fck) / 1000000));
calibrate_delay();
return 0;
}
arch_initcall(omap3xxx_clk_arch_init);
arch/arm/mach-omap2/clock3xxx.h 0 → 100644
View file @ 657ebfad
/*
* OMAP3-common clock function prototypes and macros
*
* Copyright (C) 2007-2010 Texas Instruments, Inc.
* Copyright (C) 2007-2010 Nokia Corporation
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
int omap3xxx_clk_init(void);
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
void omap3_clk_lock_dpll5(void);
extern struct clk *sdrc_ick_p;
extern struct clk *arm_fck_p;
extern const struct clkops clkops_noncore_dpll_ops;
#endif
arch/arm/mach-omap2/clock34xx_data.c → arch/arm/mach-omap2/clock3xxx_data.c
View file @ 657ebfad
......@@ -24,7 +24,11 @@
#include <plat/clkdev_omap.h>
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
#include "prm.h"
......@@ -374,7 +378,7 @@ static struct dpll_data dpll2_dd = {
static struct clk dpll2_ck = {
.name = "dpll2_ck",
.ops = &omap3_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll2_dd,
.round_rate = &omap2_dpll_round_rate,
......@@ -615,7 +619,7 @@ static struct dpll_data dpll4_dd_3630 __initdata = {
static struct clk dpll4_ck = {
.name = "dpll4_ck",
.ops = &omap3_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll4_dd,
.round_rate = &omap2_dpll_round_rate,
......@@ -1023,7 +1027,7 @@ static struct dpll_data dpll5_dd = {
static struct clk dpll5_ck = {
.name = "dpll5_ck",
.ops = &omap3_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll5_dd,
.round_rate = &omap2_dpll_round_rate,
......@@ -3567,10 +3571,12 @@ int __init omap3xxx_clk_init(void)
clk_init(&omap2_clk_functions);
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++)
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
c++)
clk_preinit(c->lk.clk);
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++)
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
c++)
if (c->cpu & cpu_clkflg) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
......
arch/arm/mach-omap2/clock44xx.c deleted 100644 → 0
View file @ b92c170d
/*
* OMAP4-specific clock framework functions
*
* Copyright (C) 2009 Texas Instruments, Inc.
*
* Rajendra Nayak (rnayak@ti.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/errno.h>
#include "clock.h"
const struct clkops omap4_clkops_noncore_dpll_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
};
arch/arm/mach-omap2/clock44xx.h
View file @ 657ebfad
......@@ -5,8 +5,8 @@
* Copyright (C) 2010 Nokia Corporation
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
/*
* XXX Missing values for the OMAP4 DPLL_USB
......@@ -17,6 +17,4 @@
int omap4xxx_clk_init(void);
extern const struct clkops omap4_clkops_noncore_dpll_ops;
#endif
arch/arm/mach-omap2/clock44xx_data.c
View file @ 657ebfad
......@@ -277,7 +277,7 @@ static struct clk dpll_abe_ck = {
.parent = &abe_dpll_refclk_mux_ck,
.dpll_data = &dpll_abe_dd,
.init = &omap2_init_dpll_parent,
.ops = &omap4_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
......@@ -644,7 +644,7 @@ static struct clk dpll_iva_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_iva_dd,
.init = &omap2_init_dpll_parent,
.ops = &omap4_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
......@@ -704,7 +704,7 @@ static struct clk dpll_mpu_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_mpu_dd,
.init = &omap2_init_dpll_parent,
.ops = &omap4_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
......@@ -776,7 +776,7 @@ static struct clk dpll_per_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_per_dd,
.init = &omap2_init_dpll_parent,
.ops = &omap4_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
......@@ -891,7 +891,7 @@ static struct clk dpll_unipro_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_unipro_dd,
.init = &omap2_init_dpll_parent,
.ops = &omap4_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
......@@ -947,7 +947,7 @@ static struct clk dpll_usb_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_usb_dd,
.init = &omap2_init_dpll_parent,
.ops = &omap4_clkops_noncore_dpll_ops,
.ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
......
arch/arm/mach-omap2/io.c
View file @ 657ebfad
......@@ -36,7 +36,7 @@
#include <plat/vram.h>
#include "clock2xxx.h"
#include "clock34xx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
#include <plat/omap-pm.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7