Commit 65f71b8b authored by Stephen Hemminger's avatar Stephen Hemminger Committed by David S. Miller

benet: use do_div() for 64 bit divide

The benet driver is doing a 64 bit divide, which is not supported in
Linux kernel on 32 bit architectures. The correct way to do this is to
use do_div().  Compile tested on i386 only.
Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Acked-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7d0b591c
......@@ -16,6 +16,7 @@
*/
#include "be.h"
#include <asm/div64.h>
MODULE_VERSION(DRV_VER);
MODULE_DEVICE_TABLE(pci, be_dev_ids);
......@@ -290,6 +291,17 @@ static struct net_device_stats *be_get_stats(struct net_device *dev)
return &adapter->stats.net_stats;
}
static u32 be_calc_rate(u64 bytes, unsigned long ticks)
{
u64 rate = bytes;
do_div(rate, ticks / HZ);
rate <<= 3; /* bytes/sec -> bits/sec */
do_div(rate, 1000000ul); /* MB/Sec */
return rate;
}
static void be_tx_rate_update(struct be_adapter *adapter)
{
struct be_drvr_stats *stats = drvr_stats(adapter);
......@@ -303,11 +315,9 @@ static void be_tx_rate_update(struct be_adapter *adapter)
/* Update tx rate once in two seconds */
if ((now - stats->be_tx_jiffies) > 2 * HZ) {
u32 r;
r = (stats->be_tx_bytes - stats->be_tx_bytes_prev) /
((now - stats->be_tx_jiffies) / HZ);
r = r / 1000000; /* M bytes/s */
stats->be_tx_rate = r * 8; /* M bits/s */
stats->be_tx_rate = be_calc_rate(stats->be_tx_bytes
- stats->be_tx_bytes_prev,
now - stats->be_tx_jiffies);
stats->be_tx_jiffies = now;
stats->be_tx_bytes_prev = stats->be_tx_bytes;
}
......@@ -599,7 +609,6 @@ static void be_rx_rate_update(struct be_adapter *adapter)
{
struct be_drvr_stats *stats = drvr_stats(adapter);
ulong now = jiffies;
u32 rate;
/* Wrapped around */
if (time_before(now, stats->be_rx_jiffies)) {
......@@ -611,10 +620,9 @@ static void be_rx_rate_update(struct be_adapter *adapter)
if ((now - stats->be_rx_jiffies) < 2 * HZ)
return;
rate = (stats->be_rx_bytes - stats->be_rx_bytes_prev) /
((now - stats->be_rx_jiffies) / HZ);
rate = rate / 1000000; /* MB/Sec */
stats->be_rx_rate = rate * 8; /* Mega Bits/Sec */
stats->be_rx_rate = be_calc_rate(stats->be_rx_bytes
- stats->be_rx_bytes_prev,
now - stats->be_rx_jiffies);
stats->be_rx_jiffies = now;
stats->be_rx_bytes_prev = stats->be_rx_bytes;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment