Commit 660c619b authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Bartosz Golaszewski

gpiolib: acpi: Convert ACPI value of debounce to microseconds

It appears that GPIO ACPI library uses ACPI debounce values directly.
However, the GPIO library APIs expect the debounce timeout to be in
microseconds.

Convert ACPI value of debounce to microseconds.

While at it, document this detail where it is appropriate.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664Reported-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Fixes: 8dcb7a15 ("gpiolib: acpi: Take into account debounce settings")
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarBartosz Golaszewski <brgl@bgdev.pl>
parent fc328a7d
......@@ -307,7 +307,8 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
if (IS_ERR(desc))
return desc;
ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
/* ACPI uses hundredths of milliseconds units */
ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout * 10);
if (ret)
dev_warn(chip->parent,
"Failed to set debounce-timeout for pin 0x%04X, err %d\n",
......@@ -1035,7 +1036,8 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind
if (ret < 0)
return ret;
ret = gpio_set_debounce_timeout(desc, info.debounce);
/* ACPI uses hundredths of milliseconds units */
ret = gpio_set_debounce_timeout(desc, info.debounce * 10);
if (ret)
return ret;
......
......@@ -2217,6 +2217,16 @@ static int gpio_set_bias(struct gpio_desc *desc)
return gpio_set_config_with_argument_optional(desc, bias, arg);
}
/**
* gpio_set_debounce_timeout() - Set debounce timeout
* @desc: GPIO descriptor to set the debounce timeout
* @debounce: Debounce timeout in microseconds
*
* The function calls the certain GPIO driver to set debounce timeout
* in the hardware.
*
* Returns 0 on success, or negative error code otherwise.
*/
int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce)
{
return gpio_set_config_with_argument_optional(desc,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment