mips: generic: add fdt fixup for Realtek reference board

The bootloader used on the Realtek RTL9302C boards is an ancient vendor
fork of U-Boot that doesn't understand device trees. So to run a modern
kernel it is necessary use one of the APPENDED_DTB options.

When appending the DTB the inintrd information, if present, needs to be
inserted into the /chosen device tree node. The bootloader provides the
initrd start/size via the firmware environment. Add a fdt fixup that
will update the device tree with the initrd information.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

arch/mips/generic/Makefile

@@ -13,3 +13,4 @@ obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o
 obj-$(CONFIG_LEGACY_BOARD_OCELOT)	+= board-ocelot.o
 obj-$(CONFIG_MACH_INGENIC)			+= board-ingenic.o
 obj-$(CONFIG_VIRT_BOARD_RANCHU)		+= board-ranchu.o
+obj-$(CONFIG_MACH_REALTEK_RTL)		+= board-realtek.o

arch/mips/generic/board-realtek.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024 Allied Telesis
+ */
+
+#include <linux/errno.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+
+#include <asm/fw/fw.h>
+#include <asm/machine.h>
+
+static __init int realtek_add_initrd(void *fdt)
+{
+	int node, err;
+	u32 start, size;
+
+	node = fdt_path_offset(fdt, "/chosen");
+	if (node < 0) {
+		pr_err("/chosen node not found\n");
+		return -ENOENT;
+	}
+
+	start = fw_getenvl("initrd_start");
+	size = fw_getenvl("initrd_size");
+
+	if (start == 0 && size == 0)
+		return 0;
+
+	pr_info("Adding initrd info from environment\n");
+
+	err = fdt_setprop_u32(fdt, node, "linux,initrd-start", start);
+	if (err) {
+		pr_err("unable to set initrd-start: %d\n", err);
+		return err;
+	}
+
+	err = fdt_setprop_u32(fdt, node, "linux,initrd-end", start + size);
+	if (err) {
+		pr_err("unable to set initrd-end: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct mips_fdt_fixup realtek_fdt_fixups[] __initconst = {
+	{ realtek_add_initrd, "add initrd" },
+	{},
+};
+
+static __init const void *realtek_fixup_fdt(const void *fdt, const void *match_data)
+{
+	static unsigned char fdt_buf[16 << 10] __initdata;
+	int err;
+
+	if (fdt_check_header(fdt))
+		panic("Corrupt DT");
+
+	fw_init_cmdline();
+
+	err = apply_mips_fdt_fixups(fdt_buf, sizeof(fdt_buf), fdt, realtek_fdt_fixups);
+	if (err)
+		panic("Unable to fixup FDT: %d", err);
+
+	return fdt_buf;
+
+}
+
+static const struct of_device_id realtek_of_match[] __initconst = {
+	{ .compatible = "realtek,rtl9302-soc" },
+	{}
+};
+
+MIPS_MACHINE(realtek) = {
+	.matches = realtek_of_match,
+	.fixup_fdt = realtek_fixup_fdt,
+};