Commit 663148e4 authored by John Crispin's avatar John Crispin Committed by Ralf Baechle

Documentation: DT: net: add docs for ralink/mediatek SoC ethernet binding

Add three files. ralink,rt2880-net.txt  descibes the actual frame engine
and the other two describe the switch forntend bindings.
Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarMichael Lee <igvtee@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-mediatek@lists.infradead.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Michael Lee <igvtee@gmail.com>
Cc: steven.liu@mediatek.com
Cc: Fred.Chang@mediatek.com
Patchwork: https://patchwork.linux-mips.org/patch/11970/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 3d1f664a
Mediatek Gigabit Switch
=======================
The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
Required properties:
- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
- reg: Address and length of the register set for the device
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the gigabit switches interrupt
- resets: Should contain the gigabit switches resets
- reset-names: Should contain the reset names "gsw"
Example:
gsw@10110000 {
compatible = "ralink,mt7620-gsw";
reg = <0x10110000 8000>;
resets = <&rstctrl 23>;
reset-names = "gsw";
interrupt-parent = <&intc>;
interrupts = <17>;
};
Ralink Frame Engine Ethernet controller
=======================================
The Ralink frame engine ethernet controller can be found on Ralink and
Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
Depending on the SoC, there is a number of ports connected to the CPU port
directly and/or via a (gigabit-)switch.
* Ethernet controller node
Required properties:
- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
"ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
"mediatek,mt7620-eth", "mediatek,mt7621-eth"
- reg: Address and length of the register set for the device
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the frame engines interrupt
- resets: Should contain the frame engines resets
- reset-names: Should contain the reset names "fe". If a switch is present
"esw" is also required.
* Ethernet port node
Required properties:
- compatible: Should be "ralink,eth-port"
- reg: The number of the physical port
- phy-handle: reference to the node describing the phy
Example:
mdio-bus {
...
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
};
};
ethernet@400000 {
compatible = "ralink,rt2880-eth";
reg = <0x00400000 10000>;
#address-cells = <1>;
#size-cells = <0>;
resets = <&rstctrl 18>;
reset-names = "fe";
interrupt-parent = <&cpuintc>;
interrupts = <5>;
port@0 {
compatible = "ralink,eth-port";
reg = <0>;
phy-handle = <&phy0>;
};
};
Ralink Fast Ethernet Embedded Switch
====================================
The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
SoCs (RT3x5x, RT5350, MT76x8).
Required properties:
- compatible: Should be "ralink,rt3050-esw"
- reg: Address and length of the register set for the device
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the embedded switches interrupt
- resets: Should contain the embedded switches resets
- reset-names: Should contain the reset names "esw"
Optional properties:
- ralink,portmap: can be used to choose if the default switch setup is
llllw or wllll
- ralink,led_polarity: override the active high/low settings of the leds
Example:
esw@10110000 {
compatible = "ralink,rt3050-esw";
reg = <0x10110000 8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
interrupt-parent = <&intc>;
interrupts = <17>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment