Merge tag 'phy-for-4.19' of...

Merge tag 'phy-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.19

 *) Add new PHY driver for GEN3 PCIe PHY on Renesas R-Car
 *) Add new PHY driver for PCIe PHY on Broadcom's Stingray SoC
 *) Enable battery charging in Mediatek T-PHY
 *) Switch to SPDX identifier in Marvell PHY drivers
 *) Fix compilation warning in phy-qcom-usb-hs.c
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt

+Broadcom Stingray PCIe PHY
+
+Required properties:
+- compatible: must be "brcm,sr-pcie-phy"
+- reg: base address and length of the PCIe SS register space
+- brcm,sr-cdru: phandle to the CDRU syscon node
+- brcm,sr-mhb: phandle to the MHB syscon node
+- #phy-cells: Must be 1, denotes the PHY index
+
+For PAXB based root complex, one can have a configuration of up to 8 PHYs
+PHY index goes from 0 to 7
+
+For the internal PAXC based root complex, PHY index is always 8
+
+Example:
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
+
+	cdru: syscon@6641d000 {
+		compatible = "brcm,sr-cdru", "syscon";
+		reg = <0 0x6641d000 0 0x400>;
+	};
+
+	pcie_phy: phy@40000000 {
+		compatible = "brcm,sr-pcie-phy";
+		reg = <0 0x40000000 0 0x800>;
+		brcm,sr-cdru = <&cdru>;
+		brcm,sr-mhb = <&mhb>;
+		#phy-cells = <1>;
+	};
+
+	/* users of the PCIe PHY */
+
+	pcie0: pcie@48000000 {
+		...
+		...
+		phys = <&pcie_phy 0>;
+		phy-names = "pcie-phy";
+	};

Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt

@@ -47,6 +47,12 @@ Required properties (port (child) node):
 			- PHY_TYPE_PCIE
 			- PHY_TYPE_SATA
 
+Optional properties (PHY_TYPE_USB2 port (child) node):
+- mediatek,eye-src	: u32, the value of slew rate calibrate
+- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
+- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
+- mediatek,bc12	: bool, enable BC12 of u2phy if support it
+
 Example:
 
 u3phy: usb-phy@11290000 {

Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

@@ -12,7 +12,14 @@ Required properties:
 	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
 	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
 
- - reg: offset and length of register set for PHY's common serdes block.
+ - reg:
+   - For "qcom,sdm845-qmp-usb3-phy":
+     - index 0: address and length of register set for PHY's common serdes
+       block.
+     - named register "dp_com" (using reg-names): address and length of the
+       DP_COM control block.
+   - For all others:
+     - offset and length of register set for PHY's common serdes block.
 
  - #clock-cells: must be 1
     - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe
@@ -60,7 +67,10 @@ Required nodes:
 
 Required properties for child node:
  - reg: list of offset and length pairs of register sets for PHY blocks -
-	tx, rx and pcs.
+	- index 0: tx
+	- index 1: rx
+	- index 2: pcs
+	- index 3: pcs_misc (optional)
 
  - #phy-cells: must be 0
 

Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt

+* Renesas R-Car generation 3 PCIe PHY
+
+This file provides information on what the device node for the R-Car
+generation 3 PCIe PHY contains.
+
+Required properties:
+- compatible: "renesas,r8a77980-pcie-phy" if the device is a part of the
+	      R8A77980 SoC.
+- reg: offset and length of the register block.
+- clocks: clock phandle and specifier pair.
+- power-domains: power domain phandle and specifier pair.
+- resets: reset phandle and specifier pair.
+- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
+
+Example (R-Car V3H):
+
+	pcie-phy@e65d0000 {
+		compatible = "renesas,r8a77980-pcie-phy";
+		reg = <0 0xe65d0000 0 0x8000>;
+		#phy-cells = <0>;
+		clocks = <&cpg CPG_MOD 319>;
+		power-domains = <&sysc 32>;
+		resets = <&cpg 319>;
+	};

Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt

@@ -10,6 +10,8 @@ Required properties:
 	      SoC.
 	      "renesas,usb2-phy-r8a77965" if the device is a part of an
 	      R8A77965 SoC.
+	      "renesas,usb2-phy-r8a77990" if the device is a part of an
+	      R8A77990 SoC.
 	      "renesas,usb2-phy-r8a77995" if the device is a part of an
 	      R8A77995 SoC.
 	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.

MAINTAINERS

@@ -1647,7 +1647,8 @@ M:	Chunfeng Yun <chunfeng.yun@mediatek.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/phy/mediatek/phy-mtk-tphy.c
+F:	drivers/phy/mediatek/
+F:	Documentation/devicetree/bindings/phy/phy-mtk-*
 
 ARM/MICREL KS8695 ARCHITECTURE
 M:	Greg Ungerer <gerg@uclinux.org>

drivers/phy/broadcom/Kconfig

@@ -80,3 +80,13 @@ config PHY_BRCM_USB
 	  This driver is required by the USB XHCI, EHCI and OHCI
 	  drivers.
 	  If unsure, say N.
+
+config PHY_BCM_SR_PCIE
+	tristate "Broadcom Stingray PCIe PHY driver"
+	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select GENERIC_PHY
+	select MFD_SYSCON
+	default ARCH_BCM_IPROC
+	help
+	  Enable this to support the Broadcom Stingray PCIe PHY
+	  If unsure, say N.

drivers/phy/broadcom/Makefile

@@ -9,3 +9,5 @@ obj-$(CONFIG_PHY_BRCM_SATA)		+= phy-brcm-sata.o
 obj-$(CONFIG_PHY_BRCM_USB)		+= phy-brcm-usb-dvr.o
 
 phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o
+
+obj-$(CONFIG_PHY_BCM_SR_PCIE)		+= phy-bcm-sr-pcie.o

drivers/phy/broadcom/phy-bcm-sr-pcie.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Broadcom
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* we have up to 8 PAXB based RC. The 9th one is always PAXC */
+#define SR_NR_PCIE_PHYS               9
+#define SR_PAXC_PHY_IDX               (SR_NR_PCIE_PHYS - 1)
+
+#define PCIE_PIPEMUX_CFG_OFFSET       0x10c
+#define PCIE_PIPEMUX_SELECT_STRAP     0xf
+
+#define CDRU_STRAP_DATA_LSW_OFFSET    0x5c
+#define PCIE_PIPEMUX_SHIFT            19
+#define PCIE_PIPEMUX_MASK             0xf
+
+#define MHB_MEM_PW_PAXC_OFFSET        0x1c0
+#define MHB_PWR_ARR_POWERON           0x8
+#define MHB_PWR_ARR_POWEROK           0x4
+#define MHB_PWR_POWERON               0x2
+#define MHB_PWR_POWEROK               0x1
+#define MHB_PWR_STATUS_MASK           (MHB_PWR_ARR_POWERON | \
+				       MHB_PWR_ARR_POWEROK | \
+				       MHB_PWR_POWERON | \
+				       MHB_PWR_POWEROK)
+
+struct sr_pcie_phy_core;
+
+/**
+ * struct sr_pcie_phy - Stingray PCIe PHY
+ *
+ * @core: pointer to the Stingray PCIe PHY core control
+ * @index: PHY index
+ * @phy: pointer to the kernel PHY device
+ */
+struct sr_pcie_phy {
+	struct sr_pcie_phy_core *core;
+	unsigned int index;
+	struct phy *phy;
+};
+
+/**
+ * struct sr_pcie_phy_core - Stingray PCIe PHY core control
+ *
+ * @dev: pointer to device
+ * @base: base register of PCIe SS
+ * @cdru: regmap to the CDRU device
+ * @mhb: regmap to the MHB device
+ * @pipemux: pipemuex strap
+ * @phys: array of PCIe PHYs
+ */
+struct sr_pcie_phy_core {
+	struct device *dev;
+	void __iomem *base;
+	struct regmap *cdru;
+	struct regmap *mhb;
+	u32 pipemux;
+	struct sr_pcie_phy phys[SR_NR_PCIE_PHYS];
+};
+
+/*
+ * PCIe PIPEMUX lookup table
+ *
+ * Each array index represents a PIPEMUX strap setting
+ * The array element represents a bitmap where a set bit means the PCIe
+ * core and associated serdes has been enabled as RC and is available for use
+ */
+static const u8 pipemux_table[] = {
+	/* PIPEMUX = 0, EP 1x16 */
+	0x00,
+	/* PIPEMUX = 1, EP 2x8 */
+	0x00,
+	/* PIPEMUX = 2, EP 4x4 */
+	0x00,
+	/* PIPEMUX = 3, RC 2x8, cores 0, 7 */
+	0x81,
+	/* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */
+	0xc3,
+	/* PIPEMUX = 5, RC 8x2, all 8 cores */
+	0xff,
+	/* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */
+	0xcd,
+	/* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */
+	0xfd,
+	/* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */
+	0xf0,
+	/* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */
+	0xc0,
+	/* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */
+	0x42,
+	/* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */
+	0x3c,
+	/* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */
+	0xfc,
+	/* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */
+	0x4c,
+};
+
+/*
+ * Return true if the strap setting is valid
+ */
+static bool pipemux_strap_is_valid(u32 pipemux)
+{
+	return !!(pipemux < ARRAY_SIZE(pipemux_table));
+}
+
+/*
+ * Read the PCIe PIPEMUX from strap
+ */
+static u32 pipemux_strap_read(struct sr_pcie_phy_core *core)
+{
+	u32 pipemux;
+
+	/*
+	 * Read PIPEMUX configuration register to determine the pipemux setting
+	 *
+	 * In the case when the value indicates using HW strap, fall back to
+	 * use HW strap
+	 */
+	pipemux = readl(core->base + PCIE_PIPEMUX_CFG_OFFSET);
+	pipemux &= PCIE_PIPEMUX_MASK;
+	if (pipemux == PCIE_PIPEMUX_SELECT_STRAP) {
+		regmap_read(core->cdru, CDRU_STRAP_DATA_LSW_OFFSET, &pipemux);
+		pipemux >>= PCIE_PIPEMUX_SHIFT;
+		pipemux &= PCIE_PIPEMUX_MASK;
+	}
+
+	return pipemux;
+}
+
+/*
+ * Given a PIPEMUX strap and PCIe core index, this function returns true if the
+ * PCIe core needs to be enabled
+ */
+static bool pcie_core_is_for_rc(struct sr_pcie_phy *phy)
+{
+	struct sr_pcie_phy_core *core = phy->core;
+	unsigned int core_idx = phy->index;
+
+	return !!((pipemux_table[core->pipemux] >> core_idx) & 0x1);
+}
+
+static int sr_pcie_phy_init(struct phy *p)
+{
+	struct sr_pcie_phy *phy = phy_get_drvdata(p);
+
+	/*
+	 * Check whether this PHY is for root complex or not. If yes, return
+	 * zero so the host driver can proceed to enumeration. If not, return
+	 * an error and that will force the host driver to bail out
+	 */
+	if (pcie_core_is_for_rc(phy))
+		return 0;
+
+	return -ENODEV;
+}
+
+static int sr_paxc_phy_init(struct phy *p)
+{
+	struct sr_pcie_phy *phy = phy_get_drvdata(p);
+	struct sr_pcie_phy_core *core = phy->core;
+	unsigned int core_idx = phy->index;
+	u32 val;
+
+	if (core_idx != SR_PAXC_PHY_IDX)
+		return -EINVAL;
+
+	regmap_read(core->mhb, MHB_MEM_PW_PAXC_OFFSET, &val);
+	if ((val & MHB_PWR_STATUS_MASK) != MHB_PWR_STATUS_MASK) {
+		dev_err(core->dev, "PAXC is not powered up\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct phy_ops sr_pcie_phy_ops = {
+	.init = sr_pcie_phy_init,
+	.owner = THIS_MODULE,
+};
+
+static const struct phy_ops sr_paxc_phy_ops = {
+	.init = sr_paxc_phy_init,
+	.owner = THIS_MODULE,
+};
+
+static struct phy *sr_pcie_phy_xlate(struct device *dev,
+				     struct of_phandle_args *args)
+{
+	struct sr_pcie_phy_core *core;
+	int phy_idx;
+
+	core = dev_get_drvdata(dev);
+	if (!core)
+		return ERR_PTR(-EINVAL);
+
+	phy_idx = args->args[0];
+
+	if (WARN_ON(phy_idx >= SR_NR_PCIE_PHYS))
+		return ERR_PTR(-ENODEV);
+
+	return core->phys[phy_idx].phy;
+}
+
+static int sr_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct sr_pcie_phy_core *core;
+	struct resource *res;
+	struct phy_provider *provider;
+	unsigned int phy_idx = 0;
+
+	core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
+	if (!core)
+		return -ENOMEM;
+
+	core->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	core->base = devm_ioremap_resource(core->dev, res);
+	if (IS_ERR(core->base))
+		return PTR_ERR(core->base);
+
+	core->cdru = syscon_regmap_lookup_by_phandle(node, "brcm,sr-cdru");
+	if (IS_ERR(core->cdru)) {
+		dev_err(core->dev, "unable to find CDRU device\n");
+		return PTR_ERR(core->cdru);
+	}
+
+	core->mhb = syscon_regmap_lookup_by_phandle(node, "brcm,sr-mhb");
+	if (IS_ERR(core->mhb)) {
+		dev_err(core->dev, "unable to find MHB device\n");
+		return PTR_ERR(core->mhb);
+	}
+
+	/* read the PCIe PIPEMUX strap setting */
+	core->pipemux = pipemux_strap_read(core);
+	if (!pipemux_strap_is_valid(core->pipemux)) {
+		dev_err(core->dev, "invalid PCIe PIPEMUX strap %u\n",
+			core->pipemux);
+		return -EIO;
+	}
+
+	for (phy_idx = 0; phy_idx < SR_NR_PCIE_PHYS; phy_idx++) {
+		struct sr_pcie_phy *p = &core->phys[phy_idx];
+		const struct phy_ops *ops;
+
+		if (phy_idx == SR_PAXC_PHY_IDX)
+			ops = &sr_paxc_phy_ops;
+		else
+			ops = &sr_pcie_phy_ops;
+
+		p->phy = devm_phy_create(dev, NULL, ops);
+		if (IS_ERR(p->phy)) {
+			dev_err(dev, "failed to create PCIe PHY\n");
+			return PTR_ERR(p->phy);
+		}
+
+		p->core = core;
+		p->index = phy_idx;
+		phy_set_drvdata(p->phy, p);
+	}
+
+	dev_set_drvdata(dev, core);
+
+	provider = devm_of_phy_provider_register(dev, sr_pcie_phy_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_info(dev, "Stingray PCIe PHY driver initialized\n");
+
+	return 0;
+}
+
+static const struct of_device_id sr_pcie_phy_match_table[] = {
+	{ .compatible = "brcm,sr-pcie-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sr_pcie_phy_match_table);
+
+static struct platform_driver sr_pcie_phy_driver = {
+	.driver = {
+		.name		= "sr-pcie-phy",
+		.of_match_table	= sr_pcie_phy_match_table,
+	},
+	.probe	= sr_pcie_phy_probe,
+};
+module_platform_driver(sr_pcie_phy_driver);
+
+MODULE_AUTHOR("Ray Jui <ray.jui@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Stingray PCIe PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/marvell/phy-berlin-sata.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell Berlin SATA PHY driver
  *
  * Copyright (C) 2014 Marvell Technology Group Ltd.
  *
  * Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/clk.h>

drivers/phy/marvell/phy-berlin-usb.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2014 Marvell Technology Group Ltd.
  *
  * Antoine Tenart <antoine.tenart@free-electrons.com>
  * Jisheng Zhang <jszhang@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/io.h>

drivers/phy/marvell/phy-mvebu-cp110-comphy.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017 Marvell
  *
  * Antoine Tenart <antoine.tenart@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/io.h>

drivers/phy/mediatek/Makefile

+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for the phy drivers.
 #

drivers/phy/mediatek/phy-mtk-tphy.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
  *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <dt-bindings/phy/phy.h>
@@ -50,6 +42,12 @@
 #define PA0_RG_U2PLL_FORCE_ON		BIT(15)
 #define PA0_RG_USB20_INTR_EN		BIT(5)
 
+#define U3P_USBPHYACR1		0x004
+#define PA1_RG_VRT_SEL			GENMASK(14, 12)
+#define PA1_RG_VRT_SEL_VAL(x)	((0x7 & (x)) << 12)
+#define PA1_RG_TERM_SEL		GENMASK(10, 8)
+#define PA1_RG_TERM_SEL_VAL(x)	((0x7 & (x)) << 8)
+
 #define U3P_USBPHYACR2		0x008
 #define PA2_RG_SIF_U2PLL_FORCE_EN	BIT(18)
 
@@ -103,6 +101,9 @@
 #define P2C_RG_AVALID			BIT(2)
 #define P2C_RG_IDDIG			BIT(1)
 
+#define U3P_U2PHYBC12C		0x080
+#define P2C_RG_CHGDT_EN		BIT(0)
+
 #define U3P_U3_CHIP_GPIO_CTLD		0x0c
 #define P3C_REG_IP_SW_RST		BIT(31)
 #define P3C_MCU_BUS_CK_GATE_EN		BIT(30)
@@ -296,6 +297,10 @@ struct mtk_phy_instance {
 	struct clk *ref_clk;	/* reference clock of anolog phy */
 	u32 index;
 	u8 type;
+	int eye_src;
+	int eye_vrt;
+	int eye_term;
+	bool bc12_en;
 };
 
 struct mtk_tphy {
@@ -320,6 +325,10 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
 	int fm_out;
 	u32 tmp;
 
+	/* use force value */
+	if (instance->eye_src)
+		return;
+
 	/* enable USB ring oscillator */
 	tmp = readl(com + U3P_USBPHYACR5);
 	tmp |= PA5_RG_U2_HSTX_SRCAL_EN;
@@ -826,6 +835,61 @@ static void phy_v2_banks_init(struct mtk_tphy *tphy,
 	}
 }
 
+static void phy_parse_property(struct mtk_tphy *tphy,
+				struct mtk_phy_instance *instance)
+{
+	struct device *dev = &instance->phy->dev;
+
+	if (instance->type != PHY_TYPE_USB2)
+		return;
+
+	instance->bc12_en = device_property_read_bool(dev, "mediatek,bc12");
+	device_property_read_u32(dev, "mediatek,eye-src",
+				 &instance->eye_src);
+	device_property_read_u32(dev, "mediatek,eye-vrt",
+				 &instance->eye_vrt);
+	device_property_read_u32(dev, "mediatek,eye-term",
+				 &instance->eye_term);
+	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d\n",
+		instance->bc12_en, instance->eye_src,
+		instance->eye_vrt, instance->eye_term);
+}
+
+static void u2_phy_props_set(struct mtk_tphy *tphy,
+			     struct mtk_phy_instance *instance)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 tmp;
+
+	if (instance->bc12_en) {
+		tmp = readl(com + U3P_U2PHYBC12C);
+		tmp |= P2C_RG_CHGDT_EN;	/* BC1.2 path Enable */
+		writel(tmp, com + U3P_U2PHYBC12C);
+	}
+
+	if (instance->eye_src) {
+		tmp = readl(com + U3P_USBPHYACR5);
+		tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
+		tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(instance->eye_src);
+		writel(tmp, com + U3P_USBPHYACR5);
+	}
+
+	if (instance->eye_vrt) {
+		tmp = readl(com + U3P_USBPHYACR1);
+		tmp &= ~PA1_RG_VRT_SEL;
+		tmp |= PA1_RG_VRT_SEL_VAL(instance->eye_vrt);
+		writel(tmp, com + U3P_USBPHYACR1);
+	}
+
+	if (instance->eye_term) {
+		tmp = readl(com + U3P_USBPHYACR1);
+		tmp &= ~PA1_RG_TERM_SEL;
+		tmp |= PA1_RG_TERM_SEL_VAL(instance->eye_term);
+		writel(tmp, com + U3P_USBPHYACR1);
+	}
+}
+
 static int mtk_phy_init(struct phy *phy)
 {
 	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
@@ -847,6 +911,7 @@ static int mtk_phy_init(struct phy *phy)
 	switch (instance->type) {
 	case PHY_TYPE_USB2:
 		u2_phy_instance_init(tphy, instance);
+		u2_phy_props_set(tphy, instance);
 		break;
 	case PHY_TYPE_USB3:
 		u3_phy_instance_init(tphy, instance);
@@ -959,6 +1024,8 @@ static struct phy *mtk_phy_xlate(struct device *dev,
 		return ERR_PTR(-EINVAL);
 	}
 
+	phy_parse_property(tphy, instance);
+
 	return instance->phy;
 }
 

drivers/phy/qualcomm/phy-qcom-usb-hs.c

@@ -55,6 +55,7 @@ static int qcom_usb_hs_phy_set_mode(struct phy *phy, enum phy_mode mode)
 		case PHY_MODE_USB_OTG:
 		case PHY_MODE_USB_HOST:
 			val |= ULPI_INT_IDGRD;
+			/* fall through */
 		case PHY_MODE_USB_DEVICE:
 			val |= ULPI_INT_SESS_VALID;
 		default:

drivers/phy/renesas/Kconfig

@@ -8,6 +8,13 @@ config PHY_RCAR_GEN2
 	help
 	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 
+config PHY_RCAR_GEN3_PCIE
+	tristate "Renesas R-Car generation 3 PCIe PHY driver"
+	depends on ARCH_RENESAS
+	select GENERIC_PHY
+	help
+	  Support for the PCIe PHY found on Renesas R-Car generation 3 SoCs.
+
 config PHY_RCAR_GEN3_USB2
 	tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
 	depends on ARCH_RENESAS

drivers/phy/renesas/Makefile

 obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_PCIE)	+= phy-rcar-gen3-pcie.o
 obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o
 obj-$(CONFIG_PHY_RCAR_GEN3_USB3)	+= phy-rcar-gen3-usb3.o

drivers/phy/renesas/phy-rcar-gen3-pcie.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen3 PCIe PHY driver
+ *
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define PHY_CTRL		0x4000		/* R8A77980 only */
+
+/* PHY control register (PHY_CTRL) */
+#define PHY_CTRL_PHY_PWDN	BIT(2)
+
+struct rcar_gen3_phy {
+	struct phy *phy;
+	spinlock_t lock;
+	void __iomem *base;
+};
+
+static void rcar_gen3_phy_pcie_modify_reg(struct phy *p, unsigned int reg,
+					  u32 clear, u32 set)
+{
+	struct rcar_gen3_phy *phy = phy_get_drvdata(p);
+	void __iomem *base = phy->base;
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&phy->lock, flags);
+
+	value = readl(base + reg);
+	value &= ~clear;
+	value |= set;
+	writel(value, base + reg);
+
+	spin_unlock_irqrestore(&phy->lock, flags);
+}
+
+static int r8a77980_phy_pcie_power_on(struct phy *p)
+{
+	/* Power on the PCIe PHY */
+	rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, PHY_CTRL_PHY_PWDN, 0);
+
+	return 0;
+}
+
+static int r8a77980_phy_pcie_power_off(struct phy *p)
+{
+	/* Power off the PCIe PHY */
+	rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, 0, PHY_CTRL_PHY_PWDN);
+
+	return 0;
+}
+
+static const struct phy_ops r8a77980_phy_pcie_ops = {
+	.power_on	= r8a77980_phy_pcie_power_on,
+	.power_off	= r8a77980_phy_pcie_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_pcie_match_table[] = {
+	{ .compatible = "renesas,r8a77980-pcie-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_pcie_match_table);
+
+static int rcar_gen3_phy_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct rcar_gen3_phy *phy;
+	struct resource *res;
+	void __iomem *base;
+	int error;
+
+	if (!dev->of_node) {
+		dev_err(dev,
+			"This driver must only be instantiated from the device tree\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	spin_lock_init(&phy->lock);
+
+	phy->base = base;
+
+	/*
+	 * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+	 * And then, phy-core will manage runtime PM for this device.
+	 */
+	pm_runtime_enable(dev);
+
+	phy->phy = devm_phy_create(dev, NULL, &r8a77980_phy_pcie_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "Failed to create PCIe PHY\n");
+		error = PTR_ERR(phy->phy);
+		goto error;
+	}
+	phy_set_drvdata(phy->phy, phy);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "Failed to register PHY provider\n");
+		error = PTR_ERR(provider);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	pm_runtime_disable(dev);
+
+	return error;
+}
+
+static int rcar_gen3_phy_pcie_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_driver = {
+	.driver = {
+		.name		= "phy_rcar_gen3_pcie",
+		.of_match_table	= rcar_gen3_phy_pcie_match_table,
+	},
+	.probe	= rcar_gen3_phy_pcie_probe,
+	.remove = rcar_gen3_phy_pcie_remove,
+};
+
+module_platform_driver(rcar_gen3_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 PCIe PHY");
+MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>");