Commit 668b54a1 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'blackfin-for-linus' of...

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao.

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  eth: bf609 eth clock: add pclk clock for stmmac driver probe
  blackfin: Wire up missing syscalls
  arch: blackfin: kernel: kgdb: Remove unused function
  dma: fix build error after update to v3.19
  blackfin: io: define __raw_readx/writex with bfin_readx/writex
  bf609: add resources for lcd nl8048
  pm: sometimes wake up from suspend to RAM would fail
  debug-mmrs: Eliminate all traces of the USB_PHY_TEST MMR
  bf609: remove softswitch i2c configuration from adv7842 and adv7511 platform data
  bf609: add platform data for soft switch devices on the video extenders
  bf609: enable soft switch gpio driver by default
  bf609: add gpio soft switch platform data for mcp23017 i2c devices
  bf609: use new SND_BF6XX_PCM to choose audio pcm driver
  bug[220] kgdb: change the smp cross core function entry
  arch: blackfin: kernel: setup.c: Cleaning up missing null-terminate in conjunction with strncpy
  blackfin: defconfigs: cleanup unused CONFIG_MTD_CHAR, add MTD_SPI_NOR for BF537-STAMP
parents fab1e550 d91e14b3
......@@ -48,7 +48,6 @@ CONFIG_IP_PNP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_RAM=y
......
......@@ -67,7 +67,6 @@ CONFIG_BFIN_SIR0=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -50,7 +50,6 @@ CONFIG_IRTTY_SIR=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
......
......@@ -50,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=m
CONFIG_MTD_CFI_AMDSTD=m
......
......@@ -55,13 +55,14 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_BFIN=y
......
......@@ -60,7 +60,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=m
CONFIG_MTD_CFI_AMDSTD=m
......
......@@ -50,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_PHRAM=y
......
......@@ -52,7 +52,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
......
......@@ -54,7 +54,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
......
......@@ -105,6 +105,7 @@ CONFIG_SPI=y
CONFIG_SPI_ADI_V3=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MCP23S08=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
......
......@@ -55,7 +55,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -37,7 +37,6 @@ CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -52,7 +52,6 @@ CONFIG_IP_PNP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -48,7 +48,6 @@ CONFIG_INET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -54,7 +54,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -52,7 +52,6 @@ CONFIG_INET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -36,7 +36,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=1
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
......
......@@ -43,7 +43,6 @@ CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
......
......@@ -46,7 +46,6 @@ CONFIG_IP_PNP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_RAM=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
......
......@@ -38,7 +38,6 @@ CONFIG_IRTTY_SIR=m
# CONFIG_WIRELESS is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_RAM=y
......
......@@ -55,7 +55,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
......
......@@ -44,7 +44,6 @@ CONFIG_INET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
......
......@@ -11,27 +11,12 @@
#include <linux/types.h>
#include <asm/byteorder.h>
#define DECLARE_BFIN_RAW_READX(size, type, asm, asm_sign) \
static inline type __raw_read##size(const volatile void __iomem *addr) \
{ \
unsigned int val; \
int tmp; \
__asm__ __volatile__ ( \
"cli %1;" \
"NOP; NOP; SSYNC;" \
"%0 = "#asm" [%2] "#asm_sign";" \
"sti %1;" \
: "=d"(val), "=d"(tmp) \
: "a"(addr) \
); \
return (type) val; \
}
DECLARE_BFIN_RAW_READX(b, u8, b, (z))
#define __raw_readb __raw_readb
DECLARE_BFIN_RAW_READX(w, u16, w, (z))
#define __raw_readw __raw_readw
DECLARE_BFIN_RAW_READX(l, u32, , )
#define __raw_readl __raw_readl
#define __raw_readb bfin_read8
#define __raw_readw bfin_read16
#define __raw_readl bfin_read32
#define __raw_writeb(val, addr) bfin_write8(addr, val)
#define __raw_writew(val, addr) bfin_write16(addr, val)
#define __raw_writel(val, addr) bfin_write32(addr, val)
extern void outsb(unsigned long port, const void *addr, unsigned long count);
extern void outsw(unsigned long port, const void *addr, unsigned long count);
......@@ -50,14 +35,6 @@ extern void insl_16(unsigned long port, void *addr, unsigned long count);
#define insw insw
#define insl insl
extern void dma_outsb(unsigned long port, const void *addr, unsigned short count);
extern void dma_outsw(unsigned long port, const void *addr, unsigned short count);
extern void dma_outsl(unsigned long port, const void *addr, unsigned short count);
extern void dma_insb(unsigned long port, void *addr, unsigned short count);
extern void dma_insw(unsigned long port, void *addr, unsigned short count);
extern void dma_insl(unsigned long port, void *addr, unsigned short count);
/**
* I/O write barrier
*
......
......@@ -401,8 +401,18 @@
#define __NR_sendmmsg 380
#define __NR_process_vm_readv 381
#define __NR_process_vm_writev 382
#define __NR_kcmp 383
#define __NR_finit_module 384
#define __NR_sched_setattr 385
#define __NR_sched_getattr 386
#define __NR_renameat2 387
#define __NR_seccomp 388
#define __NR_getrandom 389
#define __NR_memfd_create 390
#define __NR_bpf 391
#define __NR_execveat 392
#define __NR_syscall 383
#define __NR_syscall 393 /* For internal using, not implemented */
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
......
......@@ -1620,7 +1620,6 @@ static int __init bfin_debug_mmrs_init(void)
D16(USB_APHY_CNTRL);
D16(USB_APHY_CALIB);
D16(USB_APHY_CNTRL2);
D16(USB_PHY_TEST);
D16(USB_PLLOSC_CTRL);
D16(USB_SRP_CLKDIV);
D16(USB_EP_NI0_TXMAXP);
......
......@@ -330,9 +330,6 @@ static void bfin_disable_hw_debug(struct pt_regs *regs)
}
#ifdef CONFIG_SMP
extern void generic_exec_single(int cpu, struct call_single_data *data, int wait);
static struct call_single_data kgdb_smp_ipi_data[NR_CPUS];
void kgdb_passive_cpu_callback(void *info)
{
kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
......@@ -343,15 +340,14 @@ void kgdb_roundup_cpus(unsigned long flags)
unsigned int cpu;
for (cpu = cpumask_first(cpu_online_mask); cpu < nr_cpu_ids;
cpu = cpumask_next(cpu, cpu_online_mask)) {
kgdb_smp_ipi_data[cpu].func = kgdb_passive_cpu_callback;
generic_exec_single(cpu, &kgdb_smp_ipi_data[cpu], 0);
}
cpu = cpumask_next(cpu, cpu_online_mask))
smp_call_function_single(cpu, kgdb_passive_cpu_callback,
NULL, 0);
}
void kgdb_roundup_cpu(int cpu, unsigned long flags)
{
generic_exec_single(cpu, &kgdb_smp_ipi_data[cpu], 0);
smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0);
}
#endif
......@@ -359,19 +355,6 @@ void kgdb_roundup_cpu(int cpu, unsigned long flags)
static unsigned long kgdb_arch_imask;
#endif
void kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
{
if (kgdb_single_step)
preempt_enable();
#ifdef CONFIG_IPIPE
if (kgdb_arch_imask) {
cpu_pda[raw_smp_processor_id()].ex_imask = kgdb_arch_imask;
kgdb_arch_imask = 0;
}
#endif
}
int kgdb_arch_handle_exception(int vector, int signo,
int err_code, char *remcom_in_buffer,
char *remcom_out_buffer,
......
......@@ -1464,5 +1464,5 @@ void __init cmdline_init(const char *r0)
{
early_shadow_stamp();
if (r0)
strncpy(command_line, r0, COMMAND_LINE_SIZE);
strlcpy(command_line, r0, COMMAND_LINE_SIZE);
}
......@@ -122,11 +122,6 @@
#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
/* (PHY_TEST is for ADI usage only) */
#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
......
......@@ -77,10 +77,6 @@
#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
/* (PHY_TEST is for ADI usage only) */
#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */
#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */
#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
......
......@@ -241,10 +241,6 @@
#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
/* (PHY_TEST is for ADI usage only) */
#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
......
......@@ -408,10 +408,6 @@
#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
/* (PHY_TEST is for ADI usage only) */
#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
......
......@@ -140,9 +140,6 @@
#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
/* (PHY_TEST is for ADI usage only) */
#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
......
......@@ -254,9 +254,6 @@
#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
/* (PHY_TEST is for ADI usage only) */
#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
......
......@@ -780,8 +780,8 @@ static struct adi_spi3_chip spidev_chip_info = {
};
#endif
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
#if IS_ENABLED(CONFIG_SND_BF6XX_PCM)
static struct platform_device bfin_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
......@@ -1034,7 +1034,6 @@ static struct adv7842_platform_data adv7842_data = {
.i2c_infoframe = 0x48,
.i2c_cec = 0x49,
.i2c_avlink = 0x4a,
.i2c_ex = 0x26,
};
static struct bfin_capture_config bfin_capture_data = {
......@@ -1104,7 +1103,6 @@ static struct disp_route adv7511_routes[] = {
static struct adv7511_platform_data adv7511_data = {
.edid_addr = 0x7e,
.i2c_ex = 0x25,
};
static struct bfin_display_config bfin_display_data = {
......@@ -1209,6 +1207,35 @@ static struct platform_device bfin_display_device = {
};
#endif
#if defined(CONFIG_FB_BF609_NL8048) \
|| defined(CONFIG_FB_BF609_NL8048_MODULE)
static struct resource nl8048_resources[] = {
{
.start = EPPI2_STAT,
.end = EPPI2_STAT,
.flags = IORESOURCE_MEM,
},
{
.start = CH_EPPI2_CH0,
.end = CH_EPPI2_CH0,
.flags = IORESOURCE_DMA,
},
{
.start = IRQ_EPPI2_STAT,
.end = IRQ_EPPI2_STAT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_fb_device = {
.name = "bf609_nl8048",
.num_resources = ARRAY_SIZE(nl8048_resources),
.resource = nl8048_resources,
.dev = {
.platform_data = (void *)GPIO_PC15,
},
};
#endif
#if defined(CONFIG_BFIN_CRC)
#define BFIN_CRC_NAME "bfin-crc"
......@@ -1862,6 +1889,29 @@ static struct platform_device i2c_bfin_twi1_device = {
};
#endif
#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
#include <linux/spi/mcp23s08.h>
static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch0 = {
.base = 120,
};
static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch1 = {
.base = 130,
};
static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch2 = {
.base = 140,
};
# if IS_ENABLED(CONFIG_VIDEO_ADV7842)
static const struct mcp23s08_platform_data bfin_adv7842_soft_switch = {
.base = 150,
};
# endif
# if IS_ENABLED(CONFIG_VIDEO_ADV7511) || IS_ENABLED(CONFIG_VIDEO_ADV7343)
static const struct mcp23s08_platform_data bfin_adv7511_soft_switch = {
.base = 160,
};
# endif
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
......@@ -1881,6 +1931,32 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
{
I2C_BOARD_INFO("mcp23017", 0x21),
.platform_data = (void *)&bfin_mcp23s08_soft_switch0
},
{
I2C_BOARD_INFO("mcp23017", 0x22),
.platform_data = (void *)&bfin_mcp23s08_soft_switch1
},
{
I2C_BOARD_INFO("mcp23017", 0x23),
.platform_data = (void *)&bfin_mcp23s08_soft_switch2
},
# if IS_ENABLED(CONFIG_VIDEO_ADV7842)
{
I2C_BOARD_INFO("mcp23017", 0x26),
.platform_data = (void *)&bfin_adv7842_soft_switch
},
# endif
# if IS_ENABLED(CONFIG_VIDEO_ADV7511) || IS_ENABLED(CONFIG_VIDEO_ADV7343)
{
I2C_BOARD_INFO("mcp23017", 0x25),
.platform_data = (void *)&bfin_adv7511_soft_switch
},
# endif
#endif
};
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
......@@ -2023,8 +2099,8 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#if IS_ENABLED(CONFIG_SND_BF6XX_PCM)
&bfin_pcm,
#endif
#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
&bfin_i2s,
......@@ -2060,7 +2136,7 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"),
PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"),
PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.0", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
PIN_MAP_MUX_GROUP("bfin_display.0", "8bit", "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
PIN_MAP_MUX_GROUP("bfin_display.0", "16bit", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
......
......@@ -363,6 +363,12 @@ static struct clk ethclk = {
.ops = &dummy_clk_ops,
};
static struct clk ethpclk = {
.name = "pclk",
.parent = &sclk0,
.ops = &dummy_clk_ops,
};
static struct clk spiclk = {
.name = "spi",
.parent = &sclk1,
......@@ -381,6 +387,7 @@ static struct clk_lookup bf609_clks[] = {
CLK(dclk, NULL, "DCLK"),
CLK(oclk, NULL, "OCLK"),
CLK(ethclk, NULL, "stmmaceth"),
CLK(ethpclk, NULL, "pclk"),
CLK(spiclk, NULL, "spi"),
};
......
......@@ -1694,6 +1694,16 @@ ENTRY(_sys_call_table)
.long _sys_sendmmsg /* 380 */
.long _sys_process_vm_readv
.long _sys_process_vm_writev
.long _sys_kcmp
.long _sys_finit_module
.long _sys_sched_setattr /* 385 */
.long _sys_sched_getattr
.long _sys_renameat2
.long _sys_seccomp
.long _sys_getrandom
.long _sys_memfd_create /* 390 */
.long _sys_bpf
.long _sys_execveat
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
......
......@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <asm/cplb.h>
#include <asm/gpio.h>
......@@ -180,6 +181,7 @@ int bfin_pm_suspend_mem_enter(void)
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
flushinv_all_dcache();
udelay(1);
#endif
_disable_dcplb();
_disable_icplb();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment