Commit 66b7be57 authored by Takashi Iwai's avatar Takashi Iwai Committed by Greg Kroah-Hartman

ALSA: hda - Don't trust the reported actual power state

commit 50fd4987 upstream.

We've got a regression report that the recording on Mac with a cirrus
codec doesn't work any longer.  This turned out to be the missing
power up to D0 by power_save_node enablement.

After analyzing the traces, we found out that the culprit is that the
codec advertises the "actual" power state of a few nodes to be D0
while the "target" power state is D3.  This inconsistency is usually
OK, as it implies the power transition.  But in the case of cirrus
codec, this seems to be stuck to D3 while it's not actually D0.

This patch addresses the issue by checking the power state difference
more strictly.  It sends the power-state change verb unless both the
target and the actual power states show the given value.

We may introduce yet another flag indicating the possible broken
hardware power state, but it's anyway safer to set the proper power
state even in a transition (at least it's harmless as long as the
target state is same).  So this simpler change was applied now.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5582eb00
......@@ -843,7 +843,7 @@ static hda_nid_t path_power_update(struct hda_codec *codec,
bool allow_powerdown)
{
hda_nid_t nid, changed = 0;
int i, state;
int i, state, power;
for (i = 0; i < path->depth; i++) {
nid = path->path[i];
......@@ -855,7 +855,9 @@ static hda_nid_t path_power_update(struct hda_codec *codec,
state = AC_PWRST_D0;
else
state = AC_PWRST_D3;
if (!snd_hda_check_power_state(codec, nid, state)) {
power = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_POWER_STATE, 0);
if (power != (state | (state << 4))) {
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_POWER_STATE, state);
changed = nid;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment