mt76: mt7921: set EDCA parameters with the MCU CE command

The command MCU_EXT_CMD_EDCA_UPDATE is not fully supported by the MT7921
firmware, so we apply CE command MCU_CE_CMD_SET_EDCA_PARAMS instead which
is supported even in the oldest firmware to properly set up EDCA parameters
for each AC.

Fixes: 1c099ab4 ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h

@@ -1018,6 +1018,7 @@ enum {
 	MCU_CE_CMD_SET_BSS_ABORT = 0x17,
 	MCU_CE_CMD_CANCEL_HW_SCAN = 0x1b,
 	MCU_CE_CMD_SET_ROC = 0x1c,
+	MCU_CE_CMD_SET_EDCA_PARMS = 0x1d,
 	MCU_CE_CMD_SET_P2P_OPPPS = 0x33,
 	MCU_CE_CMD_SET_RATE_TX_POWER = 0x5d,
 	MCU_CE_CMD_SCHED_SCAN_ENABLE = 0x61,

drivers/net/wireless/mediatek/mt76/mt7921/mcu.c

@@ -739,33 +739,28 @@ EXPORT_SYMBOL_GPL(mt7921_mcu_exit);
 
 int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
 {
-#define WMM_AIFS_SET		BIT(0)
-#define WMM_CW_MIN_SET		BIT(1)
-#define WMM_CW_MAX_SET		BIT(2)
-#define WMM_TXOP_SET		BIT(3)
-#define WMM_PARAM_SET		GENMASK(3, 0)
-#define TX_CMD_MODE		1
+	struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
+
 	struct edca {
-		u8 queue;
-		u8 set;
-		u8 aifs;
-		u8 cw_min;
+		__le16 cw_min;
 		__le16 cw_max;
 		__le16 txop;
-	};
+		__le16 aifs;
+		u8 guardtime;
+		u8 acm;
+	} __packed;
 	struct mt7921_mcu_tx {
-		u8 total;
-		u8 action;
-		u8 valid;
-		u8 mode;
-
 		struct edca edca[IEEE80211_NUM_ACS];
+		u8 bss_idx;
+		u8 qos;
+		u8 wmm_idx;
+		u8 pad;
 	} __packed req = {
-		.valid = true,
-		.mode = TX_CMD_MODE,
-		.total = IEEE80211_NUM_ACS,
+		.bss_idx = mvif->mt76.idx,
+		.qos = vif->bss_conf.qos,
+		.wmm_idx = mvif->mt76.wmm_idx,
 	};
-	struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
+
 	struct mu_edca {
 		u8 cw_min;
 		u8 cw_max;
@@ -789,30 +784,29 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
 		.qos = vif->bss_conf.qos,
 		.wmm_idx = mvif->mt76.wmm_idx,
 	};
+	int to_aci[] = {1, 0, 2, 3};
 	int ac, ret;
 
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac];
-		struct edca *e = &req.edca[ac];
+		struct edca *e = &req.edca[to_aci[ac]];
 
-		e->set = WMM_PARAM_SET;
-		e->queue = ac + mvif->mt76.wmm_idx * MT7921_MAX_WMM_SETS;
 		e->aifs = q->aifs;
 		e->txop = cpu_to_le16(q->txop);
 
 		if (q->cw_min)
-			e->cw_min = fls(q->cw_min);
+			e->cw_min = cpu_to_le16(q->cw_min);
 		else
 			e->cw_min = 5;
 
 		if (q->cw_max)
-			e->cw_max = cpu_to_le16(fls(q->cw_max));
+			e->cw_max = cpu_to_le16(q->cw_max);
 		else
 			e->cw_max = cpu_to_le16(10);
 	}
 
-	ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(EDCA_UPDATE),
-				&req, sizeof(req), true);
+	ret = mt76_mcu_send_msg(&dev->mt76, MCU_CE_CMD(SET_EDCA_PARMS), &req,
+				sizeof(req), false);
 	if (ret)
 		return ret;
 
@@ -822,7 +816,6 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		struct ieee80211_he_mu_edca_param_ac_rec *q;
 		struct mu_edca *e;
-		int to_aci[] = {1, 0, 2, 3};
 
 		if (!mvif->queue_params[ac].mu_edca)
 			break;