clk: bcm2835: pll_off should only update CM_PLL_ANARST

bcm2835_pll_off is currently assigning CM_PLL_ANARST to the control
register, which may lose the other bits that are currently set by the
clock dividers.

It also now locks during the read/modify/write cycle of both
registers.

Fixes: 41691b88 ("clk: bcm2835: Add support for programming the
audio domain clocks")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>

drivers/clk/bcm/clk-bcm2835.c

@@ -910,8 +910,14 @@ static void bcm2835_pll_off(struct clk_hw *hw)
 	struct bcm2835_cprman *cprman = pll->cprman;
 	const struct bcm2835_pll_data *data = pll->data;
 
-	cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
-	cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN);
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->cm_ctrl_reg,
+		     cprman_read(cprman, data->cm_ctrl_reg) |
+		     CM_PLL_ANARST);
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) |
+		     A2W_PLL_CTRL_PWRDN);
+	spin_unlock(&cprman->regs_lock);
 }
 
 static int bcm2835_pll_on(struct clk_hw *hw)