Merge tag 'imx-fixes-5.12' of...

Merge tag 'imx-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.12:

- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
  independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to fix a
  kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with
  fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to
  fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
  device tree to fix UBI filesystem mount failure.

* tag 'imx-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ull: fix ubi filesystem mount failed
  ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
  arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
  arm64: dts: ls1012a: mark crypto engine dma coherent
  arm64: dts: ls1043a: mark crypto engine dma coherent
  arm64: dts: ls1046a: mark crypto engine dma coherent
  ARM: imx: avic: Convert to using IRQCHIP_DECLARE

Link: https://lore.kernel.org/r/20210318090145.GA22955@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx6ul-14x14-evk.dtsi

@@ -210,9 +210,6 @@ ethphy0: ethernet-phy@2 {
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 			clock-names = "rmii-ref";
-			reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <100>;
 
 		};
 
@@ -222,9 +219,6 @@ ethphy1: ethernet-phy@1 {
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 			clock-names = "rmii-ref";
-			reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <100>;
 		};
 	};
 };
@@ -243,6 +237,22 @@ &can2 {
 	status = "okay";
 };
 
+&gpio_spi {
+	eth0-phy-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth0-phy";
+	};
+
+	eth1-phy-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth1-phy";
+	};
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";

arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts

@@ -14,5 +14,6 @@ / {
 };
 
 &gpmi {
+	fsl,use-minimum-ecc;
 	status = "okay";
 };

arch/arm/mach-imx/avic.c

@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -162,7 +163,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void __iomem *irqbase)
+static void __init mxc_init_irq(void __iomem *irqbase)
 {
 	struct device_node *np;
 	int irq_base;
@@ -220,3 +221,16 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
+static int __init imx_avic_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	void __iomem *avic_base;
+
+	avic_base = of_iomap(node, 0);
+	BUG_ON(!avic_base);
+	mxc_init_irq(avic_base);
+	return 0;
+}
+
+IRQCHIP_DECLARE(imx_avic, "fsl,avic", imx_avic_init);

arch/arm/mach-imx/common.h

@@ -22,7 +22,6 @@ void mx35_map_io(void);
 void imx21_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
-void mxc_init_irq(void __iomem *);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
 void mxc_set_cpu_type(unsigned int type);

arch/arm/mach-imx/mach-imx1.c

@@ -17,16 +17,6 @@ static void __init imx1_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX1);
 }
 
-static void __init imx1_init_irq(void)
-{
-	void __iomem *avic_addr;
-
-	avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K);
-	WARN_ON(!avic_addr);
-
-	mxc_init_irq(avic_addr);
-}
-
 static const char * const imx1_dt_board_compat[] __initconst = {
 	"fsl,imx1",
 	NULL
@@ -34,7 +24,6 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
 	.init_early	= imx1_init_early,
-	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx25.c

@@ -22,17 +22,6 @@ static void __init imx25_dt_init(void)
 	imx_aips_allow_unprivileged_access("fsl,imx25-aips");
 }
 
-static void __init mx25_init_irq(void)
-{
-	struct device_node *np;
-	void __iomem *avic_base;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-	mxc_init_irq(avic_base);
-}
-
 static const char * const imx25_dt_board_compat[] __initconst = {
 	"fsl,imx25",
 	NULL
@@ -42,6 +31,5 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.init_early	= imx25_init_early,
 	.init_machine	= imx25_dt_init,
 	.init_late      = imx25_pm_init,
-	.init_irq	= mx25_init_irq,
 	.dt_compat	= imx25_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mach-imx27.c

@@ -56,17 +56,6 @@ static void __init imx27_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX27);
 }
 
-static void __init mx27_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-	mxc_init_irq(avic_base);
-}
-
 static const char * const imx27_dt_board_compat[] __initconst = {
 	"fsl,imx27",
 	NULL
@@ -75,7 +64,6 @@ static const char * const imx27_dt_board_compat[] __initconst = {
 DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
-	.init_irq	= mx27_init_irq,
 	.init_late	= imx27_pm_init,
 	.dt_compat	= imx27_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mach-imx31.c

@@ -14,6 +14,5 @@ static const char * const imx31_dt_board_compat[] __initconst = {
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
-	.init_irq	= mx31_init_irq,
 	.dt_compat	= imx31_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mach-imx35.c

@@ -27,6 +27,5 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
 	.l2c_aux_mask	= ~0,
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
-	.init_irq	= mx35_init_irq,
 	.dt_compat	= imx35_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mm-imx3.c

@@ -109,18 +109,6 @@ void __init imx31_init_early(void)
 	mx3_ccm_base = of_iomap(np, 0);
 	BUG_ON(!mx3_ccm_base);
 }
-
-void __init mx31_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-
-	mxc_init_irq(avic_base);
-}
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
@@ -158,16 +146,4 @@ void __init imx35_init_early(void)
 	mx3_ccm_base = of_iomap(np, 0);
 	BUG_ON(!mx3_ccm_base);
 }
-
-void __init mx35_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-
-	mxc_init_irq(avic_base);
-}
 #endif /* ifdef CONFIG_SOC_IMX35 */

arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi

@@ -198,6 +198,7 @@ crypto: crypto@1700000 {
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -348,6 +348,7 @@ crypto: crypto@1700000 {
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <0 75 0x4>;
+			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -354,6 +354,7 @@ crypto: crypto@1700000 {
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",

arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts

@@ -35,7 +35,7 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi

@@ -67,7 +67,7 @@ ethphy1: ethernet-phy@0 {
 
 &i2c1 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;