Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "First round of SCSI updates for the 4.6+ merge window.

  This batch includes the usual quota of driver updates (bnx2fc, mp3sas,
  hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas).  There's
  also a multiqueue update for scsi_debug, assorted bug fixes and a few
  other minor updates (refactor of scsi_sg_pools into generic code, alua
  and VPD updates, and struct timeval conversions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
  mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs
  mpt3sas: Set maximum transfer length per IO to 4MB for VDs
  mpt3sas: Updating mpt3sas driver version to 13.100.00.00
  mpt3sas: Fix initial Reference tag field for 4K PI drives.
  mpt3sas: Handle active cable exception event
  mpt3sas: Update MPI header to 2.00.42
  Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy"
  eata_pio: missing break statement
  hpsa: Fix type ZBC conditional checks
  scsi_lib: Decode T10 vendor IDs
  scsi_dh_alua: do not fail for unknown VPD identification
  scsi_debug: use locally assigned naa
  scsi_debug: uuid for lu name
  scsi_debug: vpd and mode page work
  scsi_debug: add multiple queue support
  bfa: fix bfa_fcb_itnim_alloc() error handling
  megaraid_sas: Downgrade two success messages to info
  cxlflash: Fix to resolve dead-lock during EEH recovery
  scsi_debug: rework resp_report_luns
  scsi_debug: use pdt constants
  ...

Documentation/scsi/g_NCR5380.txt

@@ -23,11 +23,10 @@ supported by the driver.
 
 If the default configuration does not work for you, you can use the kernel
 command lines (eg using the lilo append command):
-	ncr5380=port,irq,dma
-	ncr53c400=port,irq
-or
-	ncr5380=base,irq,dma
-	ncr53c400=base,irq
+	ncr5380=addr,irq
+	ncr53c400=addr,irq
+	ncr53c400a=addr,irq
+	dtc3181e=addr,irq
 
 The driver does not probe for any addresses or ports other than those in
 the OVERRIDE or given to the kernel as above.
@@ -36,19 +35,17 @@ This driver provides some information on what it has detected in
 /proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
 time. More info to come in the future.
 
-When NCR53c400 support is compiled in, BIOS parameters will be returned by
-the driver (the raw 5380 driver does not and I don't plan to fiddle with
-it!).
-
 This driver works as a module.
 When included as a module, parameters can be passed on the insmod/modprobe
 command line:
   ncr_irq=xx   the interrupt
   ncr_addr=xx  the port or base address (for port or memory
                mapped, resp.)
-  ncr_dma=xx   the DMA
   ncr_5380=1   to set up for a NCR5380 board
   ncr_53c400=1 to set up for a NCR53C400 board
+  ncr_53c400a=1 to set up for a NCR53C400A board
+  dtc_3181e=1  to set up for a Domex Technology Corp 3181E board
+  hp_c2502=1   to set up for a Hewlett Packard C2502 board
 e.g.
 modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
   for a port mapped NCR5380 board or

Documentation/scsi/scsi-parameters.txt

@@ -27,13 +27,15 @@ parameters may be changed at runtime by the command
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
-	atascsi=	[HW,SCSI] Atari SCSI
+	atascsi=	[HW,SCSI]
+			See drivers/scsi/atari_scsi.c.
 
 	BusLogic=	[HW,SCSI]
 			See drivers/scsi/BusLogic.c, comment before function
 			BusLogic_ParseDriverOptions().
 
 	dtc3181e=	[HW,SCSI]
+			See Documentation/scsi/g_NCR5380.txt.
 
 	eata=		[HW,SCSI]
 
@@ -51,8 +53,8 @@ parameters may be changed at runtime by the command
 	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
 			See header of drivers/scsi/ips.c.
 
-	mac5380=	[HW,SCSI] Format:
-			<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+	mac5380=	[HW,SCSI]
+			See drivers/scsi/mac_scsi.c.
 
 	max_luns=	[SCSI] Maximum number of LUNs to probe.
 			Should be between 1 and 2^32-1.
@@ -65,10 +67,13 @@ parameters may be changed at runtime by the command
 			See header of drivers/scsi/NCR_D700.c.
 
 	ncr5380=	[HW,SCSI]
+			See Documentation/scsi/g_NCR5380.txt.
 
 	ncr53c400=	[HW,SCSI]
+			See Documentation/scsi/g_NCR5380.txt.
 
 	ncr53c400a=	[HW,SCSI]
+			See Documentation/scsi/g_NCR5380.txt.
 
 	ncr53c406a=	[HW,SCSI]
 

MAINTAINERS

@@ -7593,10 +7593,10 @@ M:	Michael Schmitz <schmitzmic@gmail.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/g_NCR5380.txt
+F:	Documentation/scsi/dtc3x80.txt
 F:	drivers/scsi/NCR5380.*
 F:	drivers/scsi/arm/cumana_1.c
 F:	drivers/scsi/arm/oak.c
-F:	drivers/scsi/atari_NCR5380.c
 F:	drivers/scsi/atari_scsi.*
 F:	drivers/scsi/dmx3191d.c
 F:	drivers/scsi/dtc.*

drivers/ata/pata_icside.c

@@ -294,7 +294,7 @@ static int icside_dma_init(struct pata_icside_info *info)
 
 static struct scsi_host_template pata_icside_sht = {
 	ATA_BASE_SHT(DRV_NAME),
-	.sg_tablesize		= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize		= SG_MAX_SEGMENTS,
 	.dma_boundary		= IOMD_DMA_BOUNDARY,
 };
 

drivers/infiniband/ulp/srp/ib_srp.c

@@ -81,7 +81,7 @@ MODULE_PARM_DESC(cmd_sg_entries,
 
 module_param(indirect_sg_entries, uint, 0444);
 MODULE_PARM_DESC(indirect_sg_entries,
-		 "Default max number of gather/scatter entries (default is 12, max is " __stringify(SCSI_MAX_SG_CHAIN_SEGMENTS) ")");
+		 "Default max number of gather/scatter entries (default is 12, max is " __stringify(SG_MAX_SEGMENTS) ")");
 
 module_param(allow_ext_sg, bool, 0444);
 MODULE_PARM_DESC(allow_ext_sg,
@@ -2819,7 +2819,7 @@ static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
 	spin_unlock(&host->target_lock);
 
 	scsi_scan_target(&target->scsi_host->shost_gendev,
-			 0, target->scsi_id, SCAN_WILD_CARD, 0);
+			 0, target->scsi_id, SCAN_WILD_CARD, SCSI_SCAN_INITIAL);
 
 	if (srp_connected_ch(target) < target->ch_count ||
 	    target->qp_in_error) {
@@ -3097,7 +3097,7 @@ static int srp_parse_options(const char *buf, struct srp_target_port *target)
 
 		case SRP_OPT_SG_TABLESIZE:
 			if (match_int(args, &token) || token < 1 ||
-					token > SCSI_MAX_SG_CHAIN_SEGMENTS) {
+					token > SG_MAX_SEGMENTS) {
 				pr_warn("bad max sg_tablesize parameter '%s'\n",
 					p);
 				goto out;

drivers/message/fusion/mptsas.c

@@ -2281,7 +2281,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
 				      blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
-	if (!dma_addr_out)
+	if (pci_dma_mapping_error(ioc->pcidev, dma_addr_out))
 		goto put_mf;
 	ioc->add_sge(psge, flagsLength, dma_addr_out);
 	psge += ioc->SGE_size;
@@ -2296,7 +2296,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	flagsLength |= blk_rq_bytes(rsp) + 4;
 	dma_addr_in =  pci_map_single(ioc->pcidev, bio_data(rsp->bio),
 				      blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
-	if (!dma_addr_in)
+	if (pci_dma_mapping_error(ioc->pcidev, dma_addr_in))
 		goto unmap;
 	ioc->add_sge(psge, flagsLength, dma_addr_in);
 

drivers/message/fusion/mptspi.c

@@ -1150,7 +1150,7 @@ static void mpt_work_wrapper(struct work_struct *work)
 	}
 	shost_printk(KERN_INFO, shost, MYIOC_s_FMT
 	    "Integrated RAID detects new device %d\n", ioc->name, disk);
-	scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, 1);
+	scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, SCSI_SCAN_RESCAN);
 }
 
 

drivers/s390/scsi/zfcp_unit.c

@@ -26,7 +26,8 @@ void zfcp_unit_scsi_scan(struct zfcp_unit *unit)
 	lun = scsilun_to_int((struct scsi_lun *) &unit->fcp_lun);
 
 	if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
-		scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, lun, 1);
+		scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, lun,
+				 SCSI_SCAN_MANUAL);
 }
 
 static void zfcp_unit_scsi_scan_work(struct work_struct *work)

drivers/scsi/Kconfig

@@ -17,6 +17,7 @@ config SCSI
 	tristate "SCSI device support"
 	depends on BLOCK
 	select SCSI_DMA if HAS_DMA
+	select SG_POOL
 	---help---
 	  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
 	  any other SCSI device under Linux, say Y and make sure that you know
@@ -202,12 +203,12 @@ config SCSI_ENCLOSURE
 	  certain enclosure conditions to be reported and is not required.
 
 config SCSI_CONSTANTS
-	bool "Verbose SCSI error reporting (kernel size +=75K)"
+	bool "Verbose SCSI error reporting (kernel size += 36K)"
 	depends on SCSI
 	help
 	  The error messages regarding your SCSI hardware will be easier to
 	  understand if you say Y here; it will enlarge your kernel by about
-	  75 KB. If in doubt, say Y.
+	  36 KB. If in doubt, say Y.
 
 config SCSI_LOGGING
 	bool "SCSI logging facility"
@@ -813,17 +814,6 @@ config SCSI_GENERIC_NCR5380_MMIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called g_NCR5380_mmio.
 
-config SCSI_GENERIC_NCR53C400
-	bool "Enable NCR53c400 extensions"
-	depends on SCSI_GENERIC_NCR5380
-	help
-	  This enables certain optimizations for the NCR53c400 SCSI cards.
-	  You might as well try it out.  Note that this driver will only probe
-	  for the Trantor T130B in its default configuration; you might have
-	  to pass a command line option to the kernel at boot time if it does
-	  not detect your card.  See the file
-	  <file:Documentation/scsi/g_NCR5380.txt> for details.
-
 config SCSI_IPS
 	tristate "IBM ServeRAID support"
 	depends on PCI && SCSI

drivers/scsi/NCR5380.h

@@ -199,13 +199,6 @@
 
 #define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
 
-/* 
- * "Special" value for the (unsigned char) command tag, to indicate
- * I_T_L nexus instead of I_T_L_Q.
- */
-
-#define TAG_NONE	0xff
-
 /*
  * These are "special" values for the irq and dma_channel fields of the 
  * Scsi_Host structure
@@ -220,28 +213,17 @@
 #define NO_IRQ		0
 #endif
 
-#define FLAG_NO_DMA_FIXUP		1	/* No DMA errata workarounds */
+#define FLAG_DMA_FIXUP			1	/* Use DMA errata workarounds */
 #define FLAG_NO_PSEUDO_DMA		8	/* Inhibit DMA */
 #define FLAG_LATE_DMA_SETUP		32	/* Setup NCR before DMA H/W */
-#define FLAG_TAGGED_QUEUING		64	/* as X3T9.2 spelled it */
 #define FLAG_TOSHIBA_DELAY		128	/* Allow for borken CD-ROMs */
 
-#ifdef SUPPORT_TAGS
-struct tag_alloc {
-	DECLARE_BITMAP(allocated, MAX_TAGS);
-	int nr_allocated;
-	int queue_size;
-};
-#endif
-
 struct NCR5380_hostdata {
 	NCR5380_implementation_fields;		/* implementation specific */
 	struct Scsi_Host *host;			/* Host backpointer */
 	unsigned char id_mask, id_higher_mask;	/* 1 << id, all bits greater */
 	unsigned char busy[8];			/* index = target, bit = lun */
-#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
 	int dma_len;				/* requested length of DMA */
-#endif
 	unsigned char last_message;		/* last message OUT */
 	struct scsi_cmnd *connected;		/* currently connected cmnd */
 	struct scsi_cmnd *selecting;		/* cmnd to be connected */
@@ -256,13 +238,6 @@ struct NCR5380_hostdata {
 	int read_overruns;                /* number of bytes to cut from a
 	                                   * transfer to handle chip overruns */
 	struct work_struct main_task;
-#ifdef SUPPORT_TAGS
-	struct tag_alloc TagAlloc[8][8];	/* 8 targets and 8 LUNs */
-#endif
-#ifdef PSEUDO_DMA
-	unsigned spin_max_r;
-	unsigned spin_max_w;
-#endif
 	struct workqueue_struct *work_q;
 	unsigned long accesses_per_ms;	/* chip register accesses per ms */
 };
@@ -305,132 +280,20 @@ static void NCR5380_print(struct Scsi_Host *instance);
 #define NCR5380_dprint_phase(flg, arg) do {} while (0)
 #endif
 
-#if defined(AUTOPROBE_IRQ)
 static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
-#endif
 static int NCR5380_init(struct Scsi_Host *instance, int flags);
 static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
 static void NCR5380_exit(struct Scsi_Host *instance);
 static void NCR5380_information_transfer(struct Scsi_Host *instance);
-#ifndef DONT_USE_INTR
 static irqreturn_t NCR5380_intr(int irq, void *dev_id);
-#endif
 static void NCR5380_main(struct work_struct *work);
 static const char *NCR5380_info(struct Scsi_Host *instance);
 static void NCR5380_reselect(struct Scsi_Host *instance);
 static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
-#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
 static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
-#endif
 static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
+static int NCR5380_poll_politely(struct Scsi_Host *, int, int, int, int);
+static int NCR5380_poll_politely2(struct Scsi_Host *, int, int, int, int, int, int, int);
 
-#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))
-
-#if defined(i386) || defined(__alpha__)
-
-/**
- *	NCR5380_pc_dma_setup		-	setup ISA DMA
- *	@instance: adapter to set up
- *	@ptr: block to transfer (virtual address)
- *	@count: number of bytes to transfer
- *	@mode: DMA controller mode to use
- *
- *	Program the DMA controller ready to perform an ISA DMA transfer
- *	on this chip.
- *
- *	Locks: takes and releases the ISA DMA lock.
- */
- 
-static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
-{
-	unsigned limit;
-	unsigned long bus_addr = virt_to_bus(ptr);
-	unsigned long flags;
-
-	if (instance->dma_channel <= 3) {
-		if (count > 65536)
-			count = 65536;
-		limit = 65536 - (bus_addr & 0xFFFF);
-	} else {
-		if (count > 65536 * 2)
-			count = 65536 * 2;
-		limit = 65536 * 2 - (bus_addr & 0x1FFFF);
-	}
-
-	if (count > limit)
-		count = limit;
-
-	if ((count & 1) || (bus_addr & 1))
-		panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
-	
-	flags=claim_dma_lock();
-	disable_dma(instance->dma_channel);
-	clear_dma_ff(instance->dma_channel);
-	set_dma_addr(instance->dma_channel, bus_addr);
-	set_dma_count(instance->dma_channel, count);
-	set_dma_mode(instance->dma_channel, mode);
-	enable_dma(instance->dma_channel);
-	release_dma_lock(flags);
-	
-	return count;
-}
-
-/**
- *	NCR5380_pc_dma_write_setup		-	setup ISA DMA write
- *	@instance: adapter to set up
- *	@ptr: block to transfer (virtual address)
- *	@count: number of bytes to transfer
- *
- *	Program the DMA controller ready to perform an ISA DMA write to the
- *	SCSI controller.
- *
- *	Locks: called routines take and release the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
-{
-	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
-}
-
-/**
- *	NCR5380_pc_dma_read_setup		-	setup ISA DMA read
- *	@instance: adapter to set up
- *	@ptr: block to transfer (virtual address)
- *	@count: number of bytes to transfer
- *
- *	Program the DMA controller ready to perform an ISA DMA read from the
- *	SCSI controller.
- *
- *	Locks: called routines take and release the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
-{
-	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
-}
-
-/**
- *	NCR5380_pc_dma_residual		-	return bytes left 
- *	@instance: adapter
- *
- *	Reports the number of bytes left over after the DMA was terminated.
- *
- *	Locks: takes and releases the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
-{
-	unsigned long flags;
-	int tmp;
-
-	flags = claim_dma_lock();
-	clear_dma_ff(instance->dma_channel);
-	tmp = get_dma_residue(instance->dma_channel);
-	release_dma_lock(flags);
-	
-	return tmp;
-}
-#endif				/* defined(i386) || defined(__alpha__) */
-#endif				/* defined(REAL_DMA)  */
 #endif				/* __KERNEL__ */
 #endif				/* NCR5380_H */

drivers/scsi/aacraid/aachba.c

@@ -555,8 +555,6 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext)
-		return -ENOMEM;
 
 	aac_fib_init(cmd_fibcontext);
 	dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
@@ -1037,8 +1035,6 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext)
-		return -ENOMEM;
 
 	aac_fib_init(cmd_fibcontext);
 	dinfo = (struct aac_get_serial *) fib_data(cmd_fibcontext);
@@ -1950,10 +1946,6 @@ static int aac_read(struct scsi_cmnd * scsicmd)
 	 *	Alocate and initialize a Fib
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext) {
-		printk(KERN_WARNING "aac_read: fib allocation failed\n");
-		return -1;
-	}
 
 	status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
 
@@ -2048,16 +2040,6 @@ static int aac_write(struct scsi_cmnd * scsicmd)
 	 *	Allocate and initialize a Fib then setup a BlockWrite command
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext) {
-		/* FIB temporarily unavailable,not catastrophic failure */
-
-		/* scsicmd->result = DID_ERROR << 16;
-		 * scsicmd->scsi_done(scsicmd);
-		 * return 0;
-		 */
-		printk(KERN_WARNING "aac_write: fib allocation failed\n");
-		return -1;
-	}
 
 	status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
 
@@ -2283,8 +2265,6 @@ static int aac_start_stop(struct scsi_cmnd *scsicmd)
 	 *	Allocate and initialize a Fib
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
-	if (!cmd_fibcontext)
-		return SCSI_MLQUEUE_HOST_BUSY;
 
 	aac_fib_init(cmd_fibcontext);
 
@@ -3184,8 +3164,6 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
 	 *	Allocate and initialize a Fib then setup a BlockWrite command
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext)
-		return -1;
 
 	status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
 

drivers/scsi/aacraid/aacraid.h

@@ -29,6 +29,7 @@ enum {
 #define AAC_INT_MODE_MSI		(1<<1)
 #define AAC_INT_MODE_AIF		(1<<2)
 #define AAC_INT_MODE_SYNC		(1<<3)
+#define AAC_INT_MODE_MSIX		(1<<16)
 
 #define AAC_INT_ENABLE_TYPE1_INTX	0xfffffffb
 #define AAC_INT_ENABLE_TYPE1_MSIX	0xfffffffa
@@ -62,7 +63,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 41052
+# define AAC_DRIVER_BUILD 41066
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
@@ -720,7 +721,7 @@ struct sa_registers {
 };
 
 
-#define Sa_MINIPORT_REVISION			1
+#define SA_INIT_NUM_MSIXVECTORS		1
 
 #define sa_readw(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
 #define sa_readl(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
@@ -2065,6 +2066,10 @@ extern struct aac_common aac_config;
 #define			AifEnAddJBOD		30	/* JBOD created */
 #define			AifEnDeleteJBOD		31	/* JBOD deleted */
 
+#define			AifBuManagerEvent		42 /* Bu management*/
+#define			AifBuCacheDataLoss		10
+#define			AifBuCacheDataRecover	11
+
 #define		AifCmdJobProgress	2	/* Progress report */
 #define			AifJobCtrZero	101	/* Array Zero progress */
 #define			AifJobStsSuccess 1	/* Job completes */

drivers/scsi/aacraid/comminit.c

@@ -37,6 +37,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
+#include <linux/delay.h>
 #include <linux/completion.h>
 #include <linux/mm.h>
 #include <scsi/scsi_host.h>
@@ -47,6 +48,20 @@ struct aac_common aac_config = {
 	.irq_mod = 1
 };
 
+static inline int aac_is_msix_mode(struct aac_dev *dev)
+{
+	u32 status;
+
+	status = src_readl(dev, MUnit.OMR);
+	return (status & AAC_INT_MODE_MSIX);
+}
+
+static inline void aac_change_to_intx(struct aac_dev *dev)
+{
+	aac_src_access_devreg(dev, AAC_DISABLE_MSIX);
+	aac_src_access_devreg(dev, AAC_ENABLE_INTX);
+}
+
 static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign)
 {
 	unsigned char *base;
@@ -91,7 +106,7 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
 	init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
 	if (dev->max_fib_size != sizeof(struct hw_fib))
 		init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
-	init->Sa_MSIXVectors = cpu_to_le32(Sa_MINIPORT_REVISION);
+	init->Sa_MSIXVectors = cpu_to_le32(SA_INIT_NUM_MSIXVECTORS);
 	init->fsrev = cpu_to_le32(dev->fsrev);
 
 	/*
@@ -378,21 +393,8 @@ void aac_define_int_mode(struct aac_dev *dev)
 			msi_count = i;
 		} else {
 			dev->msi_enabled = 0;
-			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled) {
-		msi_count = 1;
-		i = pci_enable_msi(dev->pdev);
-
-		if (!i) {
-			dev->msi_enabled = 1;
-			dev->msi = 1;
-		} else {
-			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
-					dev->name, dev->id, i);
+			dev_err(&dev->pdev->dev,
+			"MSIX not supported!! Will try INTX 0x%x.\n", i);
 		}
 	}
 
@@ -427,6 +429,15 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	dev->comm_interface = AAC_COMM_PRODUCER;
 	dev->raw_io_interface = dev->raw_io_64 = 0;
 
+
+	/*
+	 * Enable INTX mode, if not done already Enabled
+	 */
+	if (aac_is_msix_mode(dev)) {
+		aac_change_to_intx(dev);
+		dev_info(&dev->pdev->dev, "Changed firmware to INTX mode");
+	}
+
 	if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
 		0, 0, 0, 0, 0, 0,
 		status+0, status+1, status+2, status+3, NULL)) &&

drivers/scsi/aacraid/commsup.c

@@ -637,10 +637,10 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 					}
 					return -EFAULT;
 				}
-				/* We used to udelay() here but that absorbed
-				 * a CPU when a timeout occured. Not very
-				 * useful. */
-				cpu_relax();
+				/*
+				 * Allow other processes / CPUS to use core
+				 */
+				schedule();
 			}
 		} else if (down_interruptible(&fibptr->event_wait)) {
 			/* Do nothing ... satisfy
@@ -901,6 +901,31 @@ void aac_printf(struct aac_dev *dev, u32 val)
 	memset(cp, 0, 256);
 }
 
+static inline int aac_aif_data(struct aac_aifcmd *aifcmd, uint32_t index)
+{
+	return le32_to_cpu(((__le32 *)aifcmd->data)[index]);
+}
+
+
+static void aac_handle_aif_bu(struct aac_dev *dev, struct aac_aifcmd *aifcmd)
+{
+	switch (aac_aif_data(aifcmd, 1)) {
+	case AifBuCacheDataLoss:
+		if (aac_aif_data(aifcmd, 2))
+			dev_info(&dev->pdev->dev, "Backup unit had cache data loss - [%d]\n",
+			aac_aif_data(aifcmd, 2));
+		else
+			dev_info(&dev->pdev->dev, "Backup Unit had cache data loss\n");
+		break;
+	case AifBuCacheDataRecover:
+		if (aac_aif_data(aifcmd, 2))
+			dev_info(&dev->pdev->dev, "DDR cache data recovered successfully - [%d]\n",
+			aac_aif_data(aifcmd, 2));
+		else
+			dev_info(&dev->pdev->dev, "DDR cache data recovered successfully\n");
+		break;
+	}
+}
 
 /**
  *	aac_handle_aif		-	Handle a message from the firmware
@@ -1154,6 +1179,8 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 				  ADD : DELETE;
 				break;
 			}
+			case AifBuManagerEvent:
+				aac_handle_aif_bu(dev, aifcmd);
 			break;
 		}
 
@@ -1996,6 +2023,10 @@ int aac_command_thread(void *data)
 		if (difference <= 0)
 			difference = 1;
 		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (kthread_should_stop())
+			break;
+
 		schedule_timeout(difference);
 
 		if (kthread_should_stop())

drivers/scsi/aacraid/dpcsup.c

@@ -392,9 +392,10 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
 			if (likely(fib->callback && fib->callback_data)) {
 				fib->flags &= FIB_CONTEXT_FLAG_FASTRESP;
 				fib->callback(fib->callback_data, fib);
-			} else {
-				aac_fib_complete(fib);
-			}
+			} else
+				dev_info(&dev->pdev->dev,
+				"Invalid callback_fib[%d] (*%p)(%p)\n",
+				index, fib->callback, fib->callback_data);
 		} else {
 			unsigned long flagv;
 	  		dprintk((KERN_INFO "event_wait up\n"));

drivers/scsi/aacraid/linit.c

@@ -1299,6 +1299,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		shost->this_id = shost->max_id;
 
+	aac_intr_normal(aac, 0, 2, 0, NULL);
+
 	/*
 	 * dmb - we may need to move the setting of these parms somewhere else once
 	 * we get a fib that can report the actual numbers
@@ -1431,8 +1433,8 @@ static int aac_acquire_resources(struct aac_dev *dev)
 		/* After EEH recovery or suspend resume, max_msix count
 		 * may change, therfore updating in init as well.
 		 */
-		aac_adapter_start(dev);
 		dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
+		aac_adapter_start(dev);
 	}
 	return 0;
 

drivers/scsi/aacraid/src.c

@@ -135,7 +135,8 @@ static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
 
 	if (mode & AAC_INT_MODE_AIF) {
 		/* handle AIF */
-		aac_intr_normal(dev, 0, 2, 0, NULL);
+		if (dev->aif_thread && dev->fsa_dev)
+			aac_intr_normal(dev, 0, 2, 0, NULL);
 		if (dev->msi_enabled)
 			aac_src_access_devreg(dev, AAC_CLEAR_AIF_BIT);
 		mode = 0;

drivers/scsi/arm/cumana_1.c

@@ -13,13 +13,14 @@
 
 #include <scsi/scsi_host.h>
 
-#define PSEUDO_DMA
-
 #define priv(host)			((struct NCR5380_hostdata *)(host)->hostdata)
 #define NCR5380_read(reg)		cumanascsi_read(instance, reg)
 #define NCR5380_write(reg, value)	cumanascsi_write(instance, reg, value)
 
 #define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+#define NCR5380_dma_recv_setup		cumanascsi_pread
+#define NCR5380_dma_send_setup		cumanascsi_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_intr			cumanascsi_intr
 #define NCR5380_queue_command		cumanascsi_queue_command
@@ -41,8 +42,8 @@ void cumanascsi_setup(char *str, int *ints)
 #define L(v)	(((v)<<16)|((v) & 0x0000ffff))
 #define H(v)	(((v)>>16)|((v) & 0xffff0000))
 
-static inline int
-NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr, int len)
+static inline int cumanascsi_pwrite(struct Scsi_Host *host,
+                                    unsigned char *addr, int len)
 {
   unsigned long *laddr;
   void __iomem *dma = priv(host)->dma + 0x2000;
@@ -101,11 +102,14 @@ NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr, int len)
   }
 end:
   writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL);
-  return len;
+
+	if (len)
+		return -1;
+	return 0;
 }
 
-static inline int
-NCR5380_pread(struct Scsi_Host *host, unsigned char *addr, int len)
+static inline int cumanascsi_pread(struct Scsi_Host *host,
+                                   unsigned char *addr, int len)
 {
   unsigned long *laddr;
   void __iomem *dma = priv(host)->dma + 0x2000;
@@ -163,7 +167,10 @@ NCR5380_pread(struct Scsi_Host *host, unsigned char *addr, int len)
   }
 end:
   writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL);
-  return len;
+
+	if (len)
+		return -1;
+	return 0;
 }
 
 static unsigned char cumanascsi_read(struct Scsi_Host *host, unsigned int reg)
@@ -239,7 +246,7 @@ static int cumanascsi1_probe(struct expansion_card *ec,
 
 	host->irq = ec->irq;
 
-	ret = NCR5380_init(host, 0);
+	ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP);
 	if (ret)
 		goto out_unmap;
 

drivers/scsi/arm/cumana_2.c

@@ -365,7 +365,7 @@ static struct scsi_host_template cumanascsi2_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize			= SG_MAX_SEGMENTS,
 	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "cumanascsi2",

drivers/scsi/arm/eesox.c

@@ -484,7 +484,7 @@ static struct scsi_host_template eesox_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize			= SG_MAX_SEGMENTS,
 	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "eesox",

drivers/scsi/arm/oak.c

@@ -14,9 +14,6 @@
 
 #include <scsi/scsi_host.h>
 
-/*#define PSEUDO_DMA*/
-#define DONT_USE_INTR
-
 #define priv(host)			((struct NCR5380_hostdata *)(host)->hostdata)
 
 #define NCR5380_read(reg) \
@@ -24,7 +21,10 @@
 #define NCR5380_write(reg, value) \
 	writeb(value, priv(instance)->base + ((reg) << 2))
 
-#define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+#define NCR5380_dma_xfer_len(instance, cmd, phase)	(0)
+#define NCR5380_dma_recv_setup		oakscsi_pread
+#define NCR5380_dma_send_setup		oakscsi_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_queue_command		oakscsi_queue_command
 #define NCR5380_info			oakscsi_info
@@ -40,23 +40,23 @@
 #define STAT	((128 + 16) << 2)
 #define DATA	((128 + 8) << 2)
 
-static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
-              int len)
+static inline int oakscsi_pwrite(struct Scsi_Host *instance,
+                                 unsigned char *addr, int len)
 {
   void __iomem *base = priv(instance)->base;
 
 printk("writing %p len %d\n",addr, len);
-  if(!len) return -1;
 
   while(1)
   {
     int status;
     while (((status = readw(base + STAT)) & 0x100)==0);
   }
+  return 0;
 }
 
-static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
-              int len)
+static inline int oakscsi_pread(struct Scsi_Host *instance,
+                                unsigned char *addr, int len)
 {
   void __iomem *base = priv(instance)->base;
 printk("reading %p len %d\n", addr, len);
@@ -73,7 +73,7 @@ printk("reading %p len %d\n", addr, len);
       if(status & 0x200 || !timeout)
       {
         printk("status = %08X\n", status);
-        return 1;
+        return -1;
       }
     }
 
@@ -143,7 +143,7 @@ static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	host->irq = NO_IRQ;
 	host->n_io_port = 255;
 
-	ret = NCR5380_init(host, 0);
+	ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP);
 	if (ret)
 		goto out_unmap;
 

drivers/scsi/arm/powertec.c

@@ -291,7 +291,7 @@ static struct scsi_host_template powertecscsi_template = {
 
 	.can_queue			= 8,
 	.this_id			= 7,
-	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize			= SG_MAX_SEGMENTS,
 	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 2,
 	.use_clustering			= ENABLE_CLUSTERING,

drivers/scsi/bfa/bfa_fcs.h

@@ -874,8 +874,8 @@ bfa_status_t bfa_fcb_rport_alloc(struct bfad_s *bfad,
 /*
  * itnim callbacks
  */
-void bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
-			 struct bfad_itnim_s **itnim_drv);
+int bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
+			struct bfad_itnim_s **itnim_drv);
 void bfa_fcb_itnim_free(struct bfad_s *bfad,
 			struct bfad_itnim_s *itnim_drv);
 void bfa_fcb_itnim_online(struct bfad_itnim_s *itnim_drv);

drivers/scsi/bfa/bfa_fcs_fcpim.c

@@ -588,12 +588,13 @@ bfa_fcs_itnim_create(struct bfa_fcs_rport_s *rport)
 	struct bfa_fcs_lport_s *port = rport->port;
 	struct bfa_fcs_itnim_s *itnim;
 	struct bfad_itnim_s   *itnim_drv;
+	int ret;
 
 	/*
 	 * call bfad to allocate the itnim
 	 */
-	bfa_fcb_itnim_alloc(port->fcs->bfad, &itnim, &itnim_drv);
-	if (itnim == NULL) {
+	ret = bfa_fcb_itnim_alloc(port->fcs->bfad, &itnim, &itnim_drv);
+	if (ret) {
 		bfa_trc(port->fcs, rport->pwwn);
 		return NULL;
 	}

drivers/scsi/bfa/bfad_im.c

@@ -440,13 +440,13 @@ bfad_im_slave_destroy(struct scsi_device *sdev)
  * BFA FCS itnim alloc callback, after successful PRLI
  * Context: Interrupt
  */
-void
+int
 bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
 		    struct bfad_itnim_s **itnim_drv)
 {
 	*itnim_drv = kzalloc(sizeof(struct bfad_itnim_s), GFP_ATOMIC);
 	if (*itnim_drv == NULL)
-		return;
+		return -ENOMEM;
 
 	(*itnim_drv)->im = bfad->im;
 	*itnim = &(*itnim_drv)->fcs_itnim;
@@ -457,6 +457,7 @@ bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
 	 */
 	INIT_WORK(&(*itnim_drv)->itnim_work, bfad_im_itnim_work_handler);
 	bfad->bfad_flags |= BFAD_RPORT_ONLINE;
+	return 0;
 }
 
 /*

drivers/scsi/bnx2fc/bnx2fc.h

@@ -65,7 +65,7 @@
 #include "bnx2fc_constants.h"
 
 #define BNX2FC_NAME		"bnx2fc"
-#define BNX2FC_VERSION		"2.9.6"
+#define BNX2FC_VERSION		"2.10.3"
 
 #define PFX			"bnx2fc: "
 
@@ -261,6 +261,7 @@ struct bnx2fc_interface {
 	u8 vlan_enabled;
 	int vlan_id;
 	bool enabled;
+	u8 tm_timeout;
 };
 
 #define bnx2fc_from_ctlr(x)			\

drivers/scsi/bnx2fc/bnx2fc_io.c

@@ -179,12 +179,24 @@ static void bnx2fc_scsi_done(struct bnx2fc_cmd *io_req, int err_code)
 
 	bnx2fc_unmap_sg_list(io_req);
 	io_req->sc_cmd = NULL;
+
+	/* Sanity checks before returning command to mid-layer */
 	if (!sc_cmd) {
 		printk(KERN_ERR PFX "scsi_done - sc_cmd NULL. "
 				    "IO(0x%x) already cleaned up\n",
 		       io_req->xid);
 		return;
 	}
+	if (!sc_cmd->device) {
+		pr_err(PFX "0x%x: sc_cmd->device is NULL.\n", io_req->xid);
+		return;
+	}
+	if (!sc_cmd->device->host) {
+		pr_err(PFX "0x%x: sc_cmd->device->host is NULL.\n",
+		    io_req->xid);
+		return;
+	}
+
 	sc_cmd->result = err_code << 16;
 
 	BNX2FC_IO_DBG(io_req, "sc=%p, result=0x%x, retries=%d, allowed=%d\n",
@@ -770,7 +782,7 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
 	spin_unlock_bh(&tgt->tgt_lock);
 
 	rc = wait_for_completion_timeout(&io_req->tm_done,
-					 BNX2FC_TM_TIMEOUT * HZ);
+					 interface->tm_timeout * HZ);
 	spin_lock_bh(&tgt->tgt_lock);
 
 	io_req->wait_for_comp = 0;

drivers/scsi/bnx2i/bnx2i_iscsi.c

@@ -675,7 +675,7 @@ bnx2i_find_ep_in_ofld_list(struct bnx2i_hba *hba, u32 iscsi_cid)
 {
 	struct list_head *list;
 	struct list_head *tmp;
-	struct bnx2i_endpoint *ep;
+	struct bnx2i_endpoint *ep = NULL;
 
 	read_lock_bh(&hba->ep_rdwr_lock);
 	list_for_each_safe(list, tmp, &hba->ep_ofld_list) {
@@ -703,7 +703,7 @@ bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid)
 {
 	struct list_head *list;
 	struct list_head *tmp;
-	struct bnx2i_endpoint *ep;
+	struct bnx2i_endpoint *ep = NULL;
 
 	read_lock_bh(&hba->ep_rdwr_lock);
 	list_for_each_safe(list, tmp, &hba->ep_destroy_list) {

drivers/scsi/cxlflash/superpipe.c

@@ -1615,6 +1615,13 @@ static int recover_context(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
  * place at the same time and the failure was due to CXL services being
  * unable to keep up.
  *
+ * As this routine is called on ioctl context, it holds the ioctl r/w
+ * semaphore that is used to drain ioctls in recovery scenarios. The
+ * implementation to achieve the pacing described above (a local mutex)
+ * requires that the ioctl r/w semaphore be dropped and reacquired to
+ * avoid a 3-way deadlock when multiple process recoveries operate in
+ * parallel.
+ *
  * Because a user can detect an error condition before the kernel, it is
  * quite possible for this routine to act as the kernel's EEH detection
  * source (MMIO read of mbox_r). Because of this, there is a window of
@@ -1642,9 +1649,17 @@ static int cxlflash_afu_recover(struct scsi_device *sdev,
 	int rc = 0;
 
 	atomic_inc(&cfg->recovery_threads);
+	up_read(&cfg->ioctl_rwsem);
 	rc = mutex_lock_interruptible(mutex);
+	down_read(&cfg->ioctl_rwsem);
 	if (rc)
 		goto out;
+	rc = check_state(cfg);
+	if (rc) {
+		dev_err(dev, "%s: Failed state! rc=%d\n", __func__, rc);
+		rc = -ENODEV;
+		goto out;
+	}
 
 	dev_dbg(dev, "%s: reason 0x%016llX rctxid=%016llX\n",
 		__func__, recover->reason, rctxid);

drivers/scsi/dtc.h

@@ -21,14 +21,17 @@
 
 #define NCR5380_dma_xfer_len(instance, cmd, phase) \
         dtc_dma_xfer_len(cmd)
+#define NCR5380_dma_recv_setup		dtc_pread
+#define NCR5380_dma_send_setup		dtc_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_intr			dtc_intr
 #define NCR5380_queue_command		dtc_queue_command
 #define NCR5380_abort			dtc_abort
 #define NCR5380_bus_reset		dtc_bus_reset
 #define NCR5380_info			dtc_info
-#define NCR5380_show_info		dtc_show_info 
-#define NCR5380_write_info		dtc_write_info 
+
+#define NCR5380_io_delay(x)		udelay(x)
 
 /* 15 12 11 10
    1001 1100 0000 0000 */

drivers/scsi/eata_pio.c

@@ -729,6 +729,7 @@ static int register_pio_HBA(long base, struct get_conf *gc, struct pci_dev *pdev
 		break;
 	case 0x24:
 		SD(sh)->EATA_revision = 'z';
+		break;
 	default:
 		SD(sh)->EATA_revision = '?';
 	}