Staging: bcm: Fix all white space issues in led_control.h

This patch fixes all white space issues in
led_control.h as reported by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/bcm/led_control.h

@@ -2,70 +2,60 @@
 #define _LED_CONTROL_H
 
 /*************************TYPE DEF**********************/
-#define NUM_OF_LEDS 4
-
+#define NUM_OF_LEDS				4
 #define DSD_START_OFFSET			0x0200
 #define EEPROM_VERSION_OFFSET			0x020E
 #define EEPROM_HW_PARAM_POINTER_ADDRESS		0x0218
 #define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5	0x0220
 #define GPIO_SECTION_START_OFFSET		0x03
-
-#define COMPATIBILITY_SECTION_LENGTH         42
-#define COMPATIBILITY_SECTION_LENGTH_MAP5    84
-
-
-#define EEPROM_MAP5_MAJORVERSION             5
-#define EEPROM_MAP5_MINORVERSION             0
-
-
+#define COMPATIBILITY_SECTION_LENGTH		42
+#define COMPATIBILITY_SECTION_LENGTH_MAP5	84
+#define EEPROM_MAP5_MAJORVERSION		5
+#define EEPROM_MAP5_MINORVERSION		0
 #define MAX_NUM_OF_BLINKS			10
 #define NUM_OF_GPIO_PINS			16
-
 #define DISABLE_GPIO_NUM			0xFF
 #define EVENT_SIGNALED				1
-
 #define MAX_FILE_NAME_BUFFER_SIZE		100
 
-#define TURN_ON_LED(GPIO, index) do { \
-							UINT gpio_val = GPIO; \
-							(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
-							wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
-							wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
-						} while (0);
+#define TURN_ON_LED(GPIO, index) do {					\
+		UINT gpio_val = GPIO;					\
+		(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ?	\
+			wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
+			wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
+	} while (0);
 
-#define TURN_OFF_LED(GPIO, index)  do { \
-							UINT gpio_val = GPIO; \
-							(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
-							wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
-							wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val));  \
-						} while (0);
+#define TURN_OFF_LED(GPIO, index)  do {					\
+		UINT gpio_val = GPIO;					\
+		(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ?	\
+			wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
+			wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \
+	} while (0);
 
 #define B_ULONG32 unsigned long
 
 /*******************************************************/
-
-
-typedef enum _LEDColors{
-	RED_LED = 1,
-	BLUE_LED = 2,
-	YELLOW_LED = 3,
-	GREEN_LED = 4
+typedef enum _LEDColors {
+	RED_LED		= 1,
+	BLUE_LED	= 2,
+	YELLOW_LED	= 3,
+	GREEN_LED	= 4
 } LEDColors;	/*Enumerated values of different LED types*/
 
 typedef enum LedEvents {
-	SHUTDOWN_EXIT = 0x00,
-	DRIVER_INIT = 0x1,
-	FW_DOWNLOAD = 0x2,
-	FW_DOWNLOAD_DONE = 0x4,
-	NO_NETWORK_ENTRY = 0x8,
-	NORMAL_OPERATION = 0x10,
-	LOWPOWER_MODE_ENTER = 0x20,
-	IDLEMODE_CONTINUE = 0x40,
-	IDLEMODE_EXIT = 0x80,
-	LED_THREAD_INACTIVE = 0x100,  /* Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold. */
-	LED_THREAD_ACTIVE = 0x200,    /* Makes the LED Thread Active back. */
-	DRIVER_HALT = 0xff
-} LedEventInfo_t;	/* Enumerated values of different driver states */
+	SHUTDOWN_EXIT		= 0x00,
+	DRIVER_INIT		= 0x1,
+	FW_DOWNLOAD		= 0x2,
+	FW_DOWNLOAD_DONE	= 0x4,
+	NO_NETWORK_ENTRY	= 0x8,
+	NORMAL_OPERATION	= 0x10,
+	LOWPOWER_MODE_ENTER	= 0x20,
+	IDLEMODE_CONTINUE	= 0x40,
+	IDLEMODE_EXIT		= 0x80,
+	LED_THREAD_INACTIVE	= 0x100,  /* Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold. */
+	LED_THREAD_ACTIVE	= 0x200,  /* Makes the LED Thread Active back. */
+	DRIVER_HALT		= 0xff
+} LedEventInfo_t; /* Enumerated values of different driver states */
 
 /*
  * Structure which stores the information of different LED types
@@ -79,24 +69,21 @@ typedef struct LedStateInfo_t {
 	UCHAR BitPolarity; /* To represent whether H/W is normal polarity or reverse polarity */
 } LEDStateInfo, *pLEDStateInfo;
 
-
 typedef struct _LED_INFO_STRUCT {
 	LEDStateInfo	LEDState[NUM_OF_LEDS];
 	BOOLEAN		bIdleMode_tx_from_host; /* Variable to notify whether driver came out from idlemode due to Host or target*/
-	BOOLEAN			bIdle_led_off;
-	wait_queue_head_t   notify_led_event;
+	BOOLEAN		bIdle_led_off;
+	wait_queue_head_t	notify_led_event;
 	wait_queue_head_t	idleModeSyncEvent;
-	struct task_struct  *led_cntrl_threadid;
-	int                 led_thread_running;
-	BOOLEAN			bLedInitDone;
+	struct task_struct	*led_cntrl_threadid;
+	int		led_thread_running;
+	BOOLEAN		bLedInitDone;
 
 } LED_INFO_STRUCT, *PLED_INFO_STRUCT;
+
 /* LED Thread state. */
 #define BCM_LED_THREAD_DISABLED		0 /* LED Thread is not running. */
 #define BCM_LED_THREAD_RUNNING_ACTIVELY	1 /* LED thread is running. */
 #define BCM_LED_THREAD_RUNNING_INACTIVELY 2 /*LED thread has been put on hold*/
 
-
-
 #endif
-