Commit 6819563e authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: dsa: allow switch drivers to specify phy_device::dev_flags

Some switch drivers (e.g: bcm_sf2) may have to communicate specific
workarounds or flags towards the PHY device driver. Allow switches
driver to be delegated that task by introducing a get_phy_flags()
callback which will do just that.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 487320c5
......@@ -181,6 +181,7 @@ struct dsa_switch_driver {
char *(*probe)(struct device *host_dev, int sw_addr);
int (*setup)(struct dsa_switch *ds);
int (*set_addr)(struct dsa_switch *ds, u8 *addr);
u32 (*get_phy_flags)(struct dsa_switch *ds, int port);
/*
* Access to the switch's PHY registers.
......
......@@ -371,6 +371,7 @@ static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
struct dsa_chip_data *cd = ds->pd;
struct device_node *phy_dn, *port_dn;
bool phy_is_fixed = false;
u32 phy_flags = 0;
int ret;
port_dn = cd->port_dn[p->port];
......@@ -390,9 +391,12 @@ static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
phy_dn = port_dn;
}
if (ds->drv->get_phy_flags)
phy_flags = ds->drv->get_phy_flags(ds, p->port);
if (phy_dn)
p->phy = of_phy_connect(slave_dev, phy_dn,
dsa_slave_adjust_link, 0,
dsa_slave_adjust_link, phy_flags,
p->phy_interface);
if (p->phy && phy_is_fixed)
......@@ -480,6 +484,9 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent,
netif_carrier_off(slave_dev);
if (p->phy != NULL) {
if (ds->drv->get_phy_flags(ds, port))
p->phy->dev_flags |= ds->drv->get_phy_flags(ds, port);
phy_attach(slave_dev, dev_name(&p->phy->dev),
PHY_INTERFACE_MODE_GMII);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment