Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl

This fixes some CHECKs reported by the checkpatch script.

Issues reported in ath3k.c:
-------
ath3k.c
-------
CHECK: Please don't use multiple blank lines
+
+

CHECK: Blank lines aren't necessary after an open brace '{'
+static const struct usb_device_id ath3k_blist_tbl[] = {
+

CHECK: Alignment should match open parenthesis
+static int ath3k_load_firmware(struct usb_device *udev,
+                               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Alignment should match open parenthesis
+static int ath3k_get_version(struct usb_device *udev,
+                       struct ath3k_version *version)

CHECK: Alignment should match open parenthesis
+static int ath3k_load_fwfile(struct usb_device *udev,
+               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Blank lines aren't necessary after an open brace '{'
+       switch (fw_version.ref_clock) {
+

CHECK: Alignment should match open parenthesis
+       snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+               le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");

CHECK: Alignment should match open parenthesis
+static int ath3k_probe(struct usb_interface *intf,
+                       const struct usb_device_id *id)

CHECK: Alignment should match open parenthesis
+                       BT_ERR("Firmware file \"%s\" not found",
+                                                       ATH3K_FIRMWARE);

CHECK: Alignment should match open parenthesis
+               BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+                                               ATH3K_FIRMWARE, ret);

total: 0 errors, 0 warnings, 14 checks, 540 lines checked
Signed-off-by: Uri Arev <me@wantyapps.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

drivers/bluetooth/ath3k.c

@@ -3,7 +3,6 @@
  * Copyright (c) 2008-2009 Atheros Communications Inc.
  */
 
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -128,7 +127,6 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
  * for AR3012
  */
 static const struct usb_device_id ath3k_blist_tbl[] = {
-
 	/* Atheros AR3012 with sflash firmware*/
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
@@ -202,7 +200,7 @@ static inline void ath3k_log_failed_loading(int err, int len, int size,
 #define TIMEGAP_USEC_MAX	100
 
 static int ath3k_load_firmware(struct usb_device *udev,
-				const struct firmware *firmware)
+			       const struct firmware *firmware)
 {
 	u8 *send_buf;
 	int len = 0;
@@ -237,9 +235,9 @@ static int ath3k_load_firmware(struct usb_device *udev,
 		memcpy(send_buf, firmware->data + sent, size);
 
 		err = usb_bulk_msg(udev, pipe, send_buf, size,
-					&len, 3000);
+				   &len, 3000);
 
-		if (err || (len != size)) {
+		if (err || len != size) {
 			ath3k_log_failed_loading(err, len, size, count);
 			goto error;
 		}
@@ -262,7 +260,7 @@ static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 }
 
 static int ath3k_get_version(struct usb_device *udev,
-			struct ath3k_version *version)
+			     struct ath3k_version *version)
 {
 	return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
 				    USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
@@ -271,7 +269,7 @@ static int ath3k_get_version(struct usb_device *udev,
 }
 
 static int ath3k_load_fwfile(struct usb_device *udev,
-		const struct firmware *firmware)
+			     const struct firmware *firmware)
 {
 	u8 *send_buf;
 	int len = 0;
@@ -310,8 +308,8 @@ static int ath3k_load_fwfile(struct usb_device *udev,
 		memcpy(send_buf, firmware->data + sent, size);
 
 		err = usb_bulk_msg(udev, pipe, send_buf, size,
-					&len, 3000);
-		if (err || (len != size)) {
+				   &len, 3000);
+		if (err || len != size) {
 			ath3k_log_failed_loading(err, len, size, count);
 			kfree(send_buf);
 			return err;
@@ -425,7 +423,6 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 	}
 
 	switch (fw_version.ref_clock) {
-
 	case ATH3K_XTAL_FREQ_26M:
 		clk_value = 26;
 		break;
@@ -441,7 +438,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 	}
 
 	snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
-		le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
+		 le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
 
 	ret = request_firmware(&firmware, filename, &udev->dev);
 	if (ret < 0) {
@@ -456,7 +453,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 }
 
 static int ath3k_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
+		       const struct usb_device_id *id)
 {
 	const struct firmware *firmware;
 	struct usb_device *udev = interface_to_usbdev(intf);
@@ -505,10 +502,10 @@ static int ath3k_probe(struct usb_interface *intf,
 	if (ret < 0) {
 		if (ret == -ENOENT)
 			BT_ERR("Firmware file \"%s\" not found",
-							ATH3K_FIRMWARE);
+			       ATH3K_FIRMWARE);
 		else
 			BT_ERR("Firmware file \"%s\" request failed (err=%d)",
-							ATH3K_FIRMWARE, ret);
+			       ATH3K_FIRMWARE, ret);
 		return ret;
 	}