iio: sx9310: Use long instead of int for channel bitmaps

Uses for_each_set_bit() macro to loop over channel bitmaps.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/proximity/sx9310.c

@@ -119,6 +119,7 @@
 
 /* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
 #define SX9310_NUM_CHANNELS				4
+static_assert(SX9310_NUM_CHANNELS < BITS_PER_LONG);
 
 struct sx9310_data {
 	/* Serialize access to registers and channel configuration */
@@ -130,7 +131,7 @@ struct sx9310_data {
 	 * Last reading of the proximity status for each channel.
 	 * We only send an event to user space when this changes.
 	 */
-	bool prox_stat[SX9310_NUM_CHANNELS];
+	unsigned long chan_prox_stat;
 	bool trigger_enabled;
 	/* Ensure correct alignment of timestamp when present. */
 	struct {
@@ -140,7 +141,8 @@ struct sx9310_data {
 	/* Remember enabled channels and sample rate during suspend. */
 	unsigned int suspend_ctrl0;
 	struct completion completion;
-	unsigned int chan_read, chan_event;
+	unsigned long chan_read;
+	unsigned long chan_event;
 	int channel_users[SX9310_NUM_CHANNELS];
 	unsigned int whoami;
 };
@@ -283,15 +285,16 @@ static const struct regmap_config sx9310_regmap_config = {
 };
 
 static int sx9310_update_chan_en(struct sx9310_data *data,
-				 unsigned int chan_read,
-				 unsigned int chan_event)
+				 unsigned long chan_read,
+				 unsigned long chan_event)
 {
 	int ret;
+	unsigned long channels = chan_read | chan_event;
 
-	if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
+	if ((data->chan_read | data->chan_event) != channels) {
 		ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
 					 SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
-					 chan_read | chan_event);
+					 channels);
 		if (ret)
 			return ret;
 	}
@@ -532,6 +535,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 	unsigned int val, chan;
 	struct sx9310_data *data = iio_priv(indio_dev);
 	s64 timestamp = iio_get_time_ns(indio_dev);
+	unsigned long prox_changed;
 
 	/* Read proximity state on all channels */
 	ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
@@ -540,24 +544,23 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 		return;
 	}
 
-	for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
+	/*
+	 * Only iterate over channels with changes on proximity status that have
+	 * events enabled.
+	 */
+	prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
+
+	for_each_set_bit(chan, &prox_changed, SX9310_NUM_CHANNELS) {
 		int dir;
 		u64 ev;
-		bool new_prox = val & BIT(chan);
-
-		if (!(data->chan_event & BIT(chan)))
-			continue;
-		if (new_prox == data->prox_stat[chan])
-			/* No change on this channel. */
-			continue;
 
-		dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+		dir = (val & BIT(chan)) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
 		ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
 					  IIO_EV_TYPE_THRESH, dir);
 
 		iio_push_event(indio_dev, ev, timestamp);
-		data->prox_stat[chan] = new_prox;
 	}
+	data->chan_prox_stat = val;
 }
 
 static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
@@ -714,13 +717,13 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
 static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
-	unsigned int channels = 0;
+	unsigned long channels = 0;
 	int bit, ret;
 
 	mutex_lock(&data->mutex);
 	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength)
-		channels |= BIT(indio_dev->channels[bit].channel);
+		__set_bit(indio_dev->channels[bit].channel, &channels);
 
 	ret = sx9310_update_chan_en(data, channels, data->chan_event);
 	mutex_unlock(&data->mutex);