Commit 68ff39c3 authored by Vandita Kulkarni's avatar Vandita Kulkarni Committed by Lucas De Marchi

drm/i915/tgl: Add new pll ids

Add 2 new PLLs for additional TC ports. The names for the PLLs on TGL
changed, but most registers remained the same, like MGPLL5_ENABLE,
MGPLL6_ENABLE. So continue to use the name from ICL.

Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: default avatarAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-11-lucas.demarchi@intel.com
parent 1db27a72
......@@ -111,11 +111,11 @@ enum intel_dpll_id {
/**
* @DPLL_ID_ICL_DPLL0: ICL combo PHY DPLL0
* @DPLL_ID_ICL_DPLL0: ICL/TGL combo PHY DPLL0
*/
DPLL_ID_ICL_DPLL0 = 0,
/**
* @DPLL_ID_ICL_DPLL1: ICL combo PHY DPLL1
* @DPLL_ID_ICL_DPLL1: ICL/TGL combo PHY DPLL1
*/
DPLL_ID_ICL_DPLL1 = 1,
/**
......@@ -123,27 +123,40 @@ enum intel_dpll_id {
*/
DPLL_ID_EHL_DPLL4 = 2,
/**
* @DPLL_ID_ICL_TBTPLL: ICL TBT PLL
* @DPLL_ID_ICL_TBTPLL: ICL/TGL TBT PLL
*/
DPLL_ID_ICL_TBTPLL = 2,
/**
* @DPLL_ID_ICL_MGPLL1: ICL MG PLL 1 port 1 (C)
* @DPLL_ID_ICL_MGPLL1: ICL MG PLL 1 port 1 (C),
* TGL TC PLL 1 port 1 (TC1)
*/
DPLL_ID_ICL_MGPLL1 = 3,
/**
* @DPLL_ID_ICL_MGPLL2: ICL MG PLL 1 port 2 (D)
* TGL TC PLL 1 port 2 (TC2)
*/
DPLL_ID_ICL_MGPLL2 = 4,
/**
* @DPLL_ID_ICL_MGPLL3: ICL MG PLL 1 port 3 (E)
* TGL TC PLL 1 port 3 (TC3)
*/
DPLL_ID_ICL_MGPLL3 = 5,
/**
* @DPLL_ID_ICL_MGPLL4: ICL MG PLL 1 port 4 (F)
* TGL TC PLL 1 port 4 (TC4)
*/
DPLL_ID_ICL_MGPLL4 = 6,
/**
* @DPLL_ID_TGL_TCPLL5: TGL TC PLL port 5 (TC5)
*/
DPLL_ID_TGL_MGPLL5 = 7,
/**
* @DPLL_ID_TGL_TCPLL6: TGL TC PLL port 6 (TC6)
*/
DPLL_ID_TGL_MGPLL6 = 8,
};
#define I915_NUM_PLLS 7
#define I915_NUM_PLLS 9
enum icl_port_dpll_id {
ICL_PORT_DPLL_DEFAULT,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment