Commit 69747b70 authored by Iyappan Subramanian's avatar Iyappan Subramanian Committed by Luis Henriques

drivers: net: xgene: Enable MDIO driver

BugLink: https://launchpad.net/bugs/1632739

This patch enables MDIO driver by,

- Selecting MDIO_XGENE
- Changed open and close to use phy_start and phy_stop
- Changed to use mac_ops->tx(rx)_enable and tx(rx)_disable
Signed-off-by: default avatarIyappan Subramanian <isubramanian@apm.com>
Tested-by: default avatarFushen Chen <fchen@apm.com>
Tested-by: default avatarToan Le <toanle@apm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
(cherry picked from commit 47c62b6d yakkety)
Signed-off-by: default avatarCraig Magina <craig.magina@canonical.com>
Acked-by: default avatarTim Gardner <tim.gardner@canonical.com>
Acked-by: default avatarSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: default avatarSeth Forshee <seth.forshee@canonical.com>
parent d10a9444
......@@ -3,6 +3,7 @@ config NET_XGENE
depends on HAS_DMA
depends on ARCH_XGENE || COMPILE_TEST
select PHYLIB
select MDIO_XGENE
help
This is the Ethernet driver for the on-chip ethernet interface on the
APM X-Gene SoC.
......
......@@ -794,13 +794,13 @@ static void xgene_enet_adjust_link(struct net_device *ndev)
if (pdata->phy_speed != phydev->speed) {
pdata->phy_speed = phydev->speed;
mac_ops->set_speed(pdata);
xgene_gmac_rx_enable(pdata);
xgene_gmac_tx_enable(pdata);
mac_ops->rx_enable(pdata);
mac_ops->tx_enable(pdata);
phy_print_status(phydev);
}
} else {
xgene_gmac_rx_disable(pdata);
xgene_gmac_tx_disable(pdata);
mac_ops->rx_disable(pdata);
mac_ops->tx_disable(pdata);
pdata->phy_speed = SPEED_UNKNOWN;
phy_print_status(phydev);
}
......
......@@ -739,9 +739,9 @@ static int xgene_enet_open(struct net_device *ndev)
if (ret)
return ret;
if (pdata->phy_mode == PHY_INTERFACE_MODE_RGMII)
if (pdata->phy_dev) {
phy_start(pdata->phy_dev);
else {
} else {
schedule_delayed_work(&pdata->link_work, PHY_POLL_LINK_OFF);
netif_carrier_off(ndev);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment