Commit 69a07f18 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

Merge back cpufreq changes for v4.12.

parents 2f0ba790 19678ffb
...@@ -3450,6 +3450,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git ...@@ -3450,6 +3450,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
T: git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates) T: git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates)
B: https://bugzilla.kernel.org B: https://bugzilla.kernel.org
F: Documentation/cpu-freq/ F: Documentation/cpu-freq/
F: Documentation/devicetree/bindings/cpufreq/
F: drivers/cpufreq/ F: drivers/cpufreq/
F: include/linux/cpufreq.h F: include/linux/cpufreq.h
F: tools/testing/selftests/cpufreq/ F: tools/testing/selftests/cpufreq/
......
...@@ -1170,11 +1170,6 @@ external-bus@50000000 { ...@@ -1170,11 +1170,6 @@ external-bus@50000000 {
status = "disabled"; status = "disabled";
}; };
cpufreq-cooling {
compatible = "stericsson,db8500-cpufreq-cooling";
status = "disabled";
};
mcde@a0350000 { mcde@a0350000 {
compatible = "stericsson,mcde"; compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */ reg = <0xa0350000 0x1000>, /* MCDE */
......
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/cpufreq.h> #include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
...@@ -18,6 +19,7 @@ ...@@ -18,6 +19,7 @@
static struct cpufreq_frequency_table *freq_table; static struct cpufreq_frequency_table *freq_table;
static struct clk *armss_clk; static struct clk *armss_clk;
static struct thermal_cooling_device *cdev;
static int dbx500_cpufreq_target(struct cpufreq_policy *policy, static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index) unsigned int index)
...@@ -32,6 +34,22 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy) ...@@ -32,6 +34,22 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
return cpufreq_generic_init(policy, freq_table, 20 * 1000); return cpufreq_generic_init(policy, freq_table, 20 * 1000);
} }
static int dbx500_cpufreq_exit(struct cpufreq_policy *policy)
{
if (!IS_ERR(cdev))
cpufreq_cooling_unregister(cdev);
return 0;
}
static void dbx500_cpufreq_ready(struct cpufreq_policy *policy)
{
cdev = cpufreq_cooling_register(policy->cpus);
if (IS_ERR(cdev))
pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev));
else
pr_info("Cooling device registered: %s\n", cdev->type);
}
static struct cpufreq_driver dbx500_cpufreq_driver = { static struct cpufreq_driver dbx500_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS | .flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
CPUFREQ_NEED_INITIAL_FREQ_CHECK, CPUFREQ_NEED_INITIAL_FREQ_CHECK,
...@@ -39,6 +57,8 @@ static struct cpufreq_driver dbx500_cpufreq_driver = { ...@@ -39,6 +57,8 @@ static struct cpufreq_driver dbx500_cpufreq_driver = {
.target_index = dbx500_cpufreq_target, .target_index = dbx500_cpufreq_target,
.get = cpufreq_generic_get, .get = cpufreq_generic_get,
.init = dbx500_cpufreq_init, .init = dbx500_cpufreq_init,
.exit = dbx500_cpufreq_exit,
.ready = dbx500_cpufreq_ready,
.name = "DBX500", .name = "DBX500",
.attr = cpufreq_generic_attr, .attr = cpufreq_generic_attr,
}; };
......
...@@ -573,14 +573,33 @@ static struct platform_driver mt8173_cpufreq_platdrv = { ...@@ -573,14 +573,33 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
.probe = mt8173_cpufreq_probe, .probe = mt8173_cpufreq_probe,
}; };
static int mt8173_cpufreq_driver_init(void) /* List of machines supported by this driver */
static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
{ .compatible = "mediatek,mt817x", },
{ .compatible = "mediatek,mt8173", },
{ .compatible = "mediatek,mt8176", },
{ }
};
static int __init mt8173_cpufreq_driver_init(void)
{ {
struct device_node *np;
const struct of_device_id *match;
struct platform_device *pdev; struct platform_device *pdev;
int err; int err;
if (!of_machine_is_compatible("mediatek,mt8173")) np = of_find_node_by_path("/");
if (!np)
return -ENODEV; return -ENODEV;
match = of_match_node(mt8173_cpufreq_machines, np);
of_node_put(np);
if (!match) {
pr_warn("Machine is not compatible with mt8173-cpufreq\n");
return -ENODEV;
}
err = platform_driver_register(&mt8173_cpufreq_platdrv); err = platform_driver_register(&mt8173_cpufreq_platdrv);
if (err) if (err)
return err; return err;
......
...@@ -52,17 +52,27 @@ static u32 get_bus_freq(void) ...@@ -52,17 +52,27 @@ static u32 get_bus_freq(void)
{ {
struct device_node *soc; struct device_node *soc;
u32 sysfreq; u32 sysfreq;
struct clk *pltclk;
int ret;
/* get platform freq by searching bus-frequency property */
soc = of_find_node_by_type(NULL, "soc"); soc = of_find_node_by_type(NULL, "soc");
if (!soc) if (soc) {
return 0; ret = of_property_read_u32(soc, "bus-frequency", &sysfreq);
of_node_put(soc);
if (of_property_read_u32(soc, "bus-frequency", &sysfreq)) if (!ret)
sysfreq = 0; return sysfreq;
}
of_node_put(soc); /* get platform freq by its clock name */
pltclk = clk_get(NULL, "cg-pll0-div1");
if (IS_ERR(pltclk)) {
pr_err("%s: can't get bus frequency %ld\n",
__func__, PTR_ERR(pltclk));
return PTR_ERR(pltclk);
}
return sysfreq; return clk_get_rate(pltclk);
} }
static struct clk *cpu_to_clk(int cpu) static struct clk *cpu_to_clk(int cpu)
......
...@@ -291,18 +291,6 @@ config ARMADA_THERMAL ...@@ -291,18 +291,6 @@ config ARMADA_THERMAL
Enable this option if you want to have support for thermal management Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC. controller present in Armada 370 and Armada XP SoC.
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500 || COMPILE_TEST
depends on HAS_IOMEM
depends on CPU_THERMAL
default y
help
Adds DB8500 cpufreq cooling devices, and these cooling devices can be
bound to thermal zone trip points. When a trip point reached, the
bound cpufreq cooling device turns active to set CPU frequency low to
cool down the CPU.
config INTEL_POWERCLAMP config INTEL_POWERCLAMP
tristate "Intel PowerClamp idle injection driver" tristate "Intel PowerClamp idle injection driver"
depends on THERMAL depends on THERMAL
......
...@@ -41,7 +41,6 @@ obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o ...@@ -41,7 +41,6 @@ obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o
......
/*
* db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device.
*
* Copyright (C) 2012 ST-Ericsson
* Copyright (C) 2012 Linaro Ltd.
*
* Author: Hongbo Zhang <hongbo.zhang@linaro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/cpu_cooling.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(cdev)) {
int ret = PTR_ERR(cdev);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"Failed to register cooling device %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, cdev);
dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev->type);
return 0;
}
static int db8500_cpufreq_cooling_remove(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev = platform_get_drvdata(pdev);
cpufreq_cooling_unregister(cdev);
return 0;
}
static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev,
pm_message_t state)
{
return -ENOSYS;
}
static int db8500_cpufreq_cooling_resume(struct platform_device *pdev)
{
return -ENOSYS;
}
#ifdef CONFIG_OF
static const struct of_device_id db8500_cpufreq_cooling_match[] = {
{ .compatible = "stericsson,db8500-cpufreq-cooling" },
{},
};
MODULE_DEVICE_TABLE(of, db8500_cpufreq_cooling_match);
#endif
static struct platform_driver db8500_cpufreq_cooling_driver = {
.driver = {
.name = "db8500-cpufreq-cooling",
.of_match_table = of_match_ptr(db8500_cpufreq_cooling_match),
},
.probe = db8500_cpufreq_cooling_probe,
.suspend = db8500_cpufreq_cooling_suspend,
.resume = db8500_cpufreq_cooling_resume,
.remove = db8500_cpufreq_cooling_remove,
};
static int __init db8500_cpufreq_cooling_init(void)
{
return platform_driver_register(&db8500_cpufreq_cooling_driver);
}
static void __exit db8500_cpufreq_cooling_exit(void)
{
platform_driver_unregister(&db8500_cpufreq_cooling_driver);
}
/* Should be later than db8500_cpufreq_register */
late_initcall(db8500_cpufreq_cooling_init);
module_exit(db8500_cpufreq_cooling_exit);
MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
MODULE_DESCRIPTION("DB8500 cpufreq cooling driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment